From 2db496753e3a7da6117266d61782456511896c66 Mon Sep 17 00:00:00 2001 From: Yannick Fertre Date: Tue, 28 Mar 2017 11:44:48 +0200 Subject: [PATCH] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel This patch adds documentation of device tree bindings for the WVGA panel Ampire AM-480272H3TMQW-T01H. Acked-by: Rob Herring Signed-off-by: Yannick Fertre Signed-off-by: Thierry Reding --- .../panel/ampire,am-480272h3tmqw-t01h.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt new file mode 100644 index 000000000000..6812280cb109 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt @@ -0,0 +1,26 @@ +Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Required properties: +- compatible: should be "ampire,am-480272h3tmqw-t01h" + +Optional properties: +- power-supply: regulator to provide the supply voltage +- enable-gpios: GPIO pin to enable or disable the panel +- backlight: phandle of the backlight device attached to the panel + +Optional nodes: +- Video port for RGB input. + +Example: + panel_rgb: panel-rgb { + compatible = "ampire,am-480272h3tmqw-t01h"; + enable-gpios = <&gpioa 8 1>; + port { + panel_in_rgb: endpoint { + remote-endpoint = <&controller_out_rgb>; + }; + }; + }; -- 2.20.1