From 2d4b4520a5eaed6701b0c9f7540c8fd99a26e449 Mon Sep 17 00:00:00 2001 From: Sebastien Guiriec Date: Tue, 16 Oct 2012 15:23:20 +0000 Subject: [PATCH] i2c: omap: adopt pinctrl support Some GPIO expanders need some early pin control muxing. Due to legacy boards sometimes the driver uses subsys_initcall instead of module_init. This patch takes advantage of defer probe feature and pin control in order to wait until pin control probing before GPIO driver probing. It has been tested on OMAP5 board with TCA6424 driver. Signed-off-by: Sebastien Guiriec Acked-by: Shubhrajyoti D Reviewed-by: Felipe Balbi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 3525c9e62cb0..16afb289cca7 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -43,6 +43,7 @@ #include #include #include +#include /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20 @@ -213,6 +214,8 @@ struct omap_i2c_dev { u16 syscstate; u16 westate; u16 errata; + + struct pinctrl *pins; }; static const u8 reg_map_ip_v1[] = { @@ -1104,6 +1107,16 @@ omap_i2c_probe(struct platform_device *pdev) dev->dtrev = pdata->rev; } + dev->pins = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(dev->pins)) { + if (PTR_ERR(dev->pins) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_warn(&pdev->dev, "did not get pins for i2c error: %li\n", + PTR_ERR(dev->pins)); + dev->pins = NULL; + } + dev->dev = &pdev->dev; dev->irq = irq; -- 2.20.1