From 2d4a9af172814b76bf2ad5da2213ea42d111893b Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Fri, 4 Nov 2011 22:23:31 +0100 Subject: [PATCH] brcm80211: fmac: move core disable function to sdio_chip.c This patch is part of the abstracting chip backplane handle code series. Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/dhd_sdio.c | 117 +----------------- .../wireless/brcm80211/brcmfmac/sdio_chip.c | 80 ++++++++++++ .../wireless/brcm80211/brcmfmac/sdio_chip.h | 28 +++++ 3 files changed, 111 insertions(+), 114 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 9a78cc3e2820..af0d5c96984f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -309,38 +309,6 @@ struct rte_console { /* Flags for SDH calls */ #define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED) -/* sbimstate */ -#define SBIM_IBE 0x20000 /* inbanderror */ -#define SBIM_TO 0x40000 /* timeout */ -#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ -#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ - -/* sbtmstatelow */ - -/* reset */ -#define SBTML_RESET 0x0001 -/* reject field */ -#define SBTML_REJ_MASK 0x0006 -/* reject */ -#define SBTML_REJ 0x0002 -/* temporary reject, for error recovery */ -#define SBTML_TMPREJ 0x0004 - -/* Shift to locate the SI control flags in sbtml */ -#define SBTML_SICF_SHIFT 16 - -/* sbtmstatehigh */ -#define SBTMH_SERR 0x0001 /* serror */ -#define SBTMH_INT 0x0002 /* interrupt */ -#define SBTMH_BUSY 0x0004 /* busy */ -#define SBTMH_TO 0x0020 /* timeout (sonics >= 2.3) */ - -/* Shift to locate the SI status flags in sbtmh */ -#define SBTMH_SISF_SHIFT 16 - -/* sbidlow */ -#define SBIDL_INIT 0x80 /* initiator */ - /* * Conversion of 802.1D priority to precedence level */ @@ -3122,85 +3090,6 @@ static int brcmf_sdbrcm_write_vars(struct brcmf_bus *bus) return bcmerror; } -static void -brcmf_sdbrcm_chip_disablecore(struct brcmf_sdio_dev *sdiodev, u32 corebase) -{ - u32 regdata; - - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbtmstatelow), 4); - if (regdata & SBTML_RESET) - return; - - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbtmstatelow), 4); - if ((regdata & (SICF_CLOCK_EN << SBTML_SICF_SHIFT)) != 0) { - /* - * set target reject and spin until busy is clear - * (preserve core-specific bits) - */ - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbtmstatelow), 4); - brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbtmstatelow), - 4, regdata | SBTML_REJ); - - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbtmstatelow), 4); - udelay(1); - SPINWAIT((brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbtmstatehigh), 4) & - SBTMH_BUSY), 100000); - - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbtmstatehigh), 4); - if (regdata & SBTMH_BUSY) - brcmf_dbg(ERROR, "ARM core still busy\n"); - - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbidlow), 4); - if (regdata & SBIDL_INIT) { - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbimstate), 4) | - SBIM_RJ; - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(corebase, sbimstate), 4, - regdata); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbimstate), 4); - udelay(1); - SPINWAIT((brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbimstate), 4) & - SBIM_BY), 100000); - } - - /* set reset and reject while enabling the clocks */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(corebase, sbtmstatelow), 4, - (((SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT) | - SBTML_REJ | SBTML_RESET)); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbtmstatelow), 4); - udelay(10); - - /* clear the initiator reject bit */ - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbidlow), 4); - if (regdata & SBIDL_INIT) { - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(corebase, sbimstate), 4) & - ~SBIM_RJ; - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(corebase, sbimstate), 4, - regdata); - } - } - - /* leave reset and reject asserted */ - brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbtmstatelow), 4, - (SBTML_REJ | SBTML_RESET)); - udelay(1); -} - static void brcmf_sdbrcm_chip_resetcore(struct brcmf_sdio_dev *sdiodev, u32 corebase) { @@ -3210,7 +3099,7 @@ brcmf_sdbrcm_chip_resetcore(struct brcmf_sdio_dev *sdiodev, u32 corebase) * Must do the disable sequence first to work for * arbitrary current core state. */ - brcmf_sdbrcm_chip_disablecore(sdiodev, corebase); + brcmf_sdio_chip_coredisable(sdiodev, corebase); /* * Now do the initialization sequence. @@ -3258,7 +3147,7 @@ static int brcmf_sdbrcm_download_state(struct brcmf_bus *bus, bool enter) if (enter) { bus->alp_only = true; - brcmf_sdbrcm_chip_disablecore(bus->sdiodev, + brcmf_sdio_chip_coredisable(bus->sdiodev, bus->ci->armcorebase); brcmf_sdbrcm_chip_resetcore(bus->sdiodev, bus->ci->ramcorebase); @@ -4000,7 +3889,7 @@ brcmf_sdbrcm_chip_attach(struct brcmf_bus *bus, u32 regs) * Make sure any on-chip ARM is off (in case strapping is wrong), * or downloaded code was already running. */ - brcmf_sdbrcm_chip_disablecore(bus->sdiodev, ci->armcorebase); + brcmf_sdio_chip_coredisable(bus->sdiodev, ci->armcorebase); brcmf_sdcard_reg_write(bus->sdiodev, CORE_CC_REG(ci->cccorebase, gpiopullup), 4, 0); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c index 1e01ae254622..f198a48bc2ca 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "dhd.h" #include "dhd_dbg.h" #include "sdio_host.h" @@ -51,6 +52,85 @@ #define SBIDH_VC_MASK 0xffff0000 /* vendor code */ #define SBIDH_VC_SHIFT 16 +void +brcmf_sdio_chip_coredisable(struct brcmf_sdio_dev *sdiodev, u32 corebase) +{ + u32 regdata; + + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbtmstatelow), 4); + if (regdata & SBTML_RESET) + return; + + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbtmstatelow), 4); + if ((regdata & (SICF_CLOCK_EN << SBTML_SICF_SHIFT)) != 0) { + /* + * set target reject and spin until busy is clear + * (preserve core-specific bits) + */ + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbtmstatelow), 4); + brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbtmstatelow), + 4, regdata | SBTML_REJ); + + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbtmstatelow), 4); + udelay(1); + SPINWAIT((brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbtmstatehigh), 4) & + SBTMH_BUSY), 100000); + + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbtmstatehigh), 4); + if (regdata & SBTMH_BUSY) + brcmf_dbg(ERROR, "core state still busy\n"); + + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbidlow), 4); + if (regdata & SBIDL_INIT) { + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbimstate), 4) | + SBIM_RJ; + brcmf_sdcard_reg_write(sdiodev, + CORE_SB(corebase, sbimstate), 4, + regdata); + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbimstate), 4); + udelay(1); + SPINWAIT((brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbimstate), 4) & + SBIM_BY), 100000); + } + + /* set reset and reject while enabling the clocks */ + brcmf_sdcard_reg_write(sdiodev, + CORE_SB(corebase, sbtmstatelow), 4, + (((SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT) | + SBTML_REJ | SBTML_RESET)); + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbtmstatelow), 4); + udelay(10); + + /* clear the initiator reject bit */ + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbidlow), 4); + if (regdata & SBIDL_INIT) { + regdata = brcmf_sdcard_reg_read(sdiodev, + CORE_SB(corebase, sbimstate), 4) & + ~SBIM_RJ; + brcmf_sdcard_reg_write(sdiodev, + CORE_SB(corebase, sbimstate), 4, + regdata); + } + } + + /* leave reset and reject asserted */ + brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbtmstatelow), 4, + (SBTML_REJ | SBTML_RESET)); + udelay(1); +} + static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, u32 regs) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h index 1985e3650559..17007bdad564 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h @@ -52,6 +52,31 @@ #define SBSDIO_CLKAV(regval, alponly) \ (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval))) +/* sbimstate */ +#define SBIM_IBE 0x20000 /* inbanderror */ +#define SBIM_TO 0x40000 /* timeout */ +#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ +#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ + +/* sbtmstatelow */ +#define SBTML_RESET 0x0001 /* reset */ +#define SBTML_REJ_MASK 0x0006 /* reject field */ +#define SBTML_REJ 0x0002 /* reject */ +#define SBTML_TMPREJ 0x0004 /* temporary reject(error recovery) */ +/* Shift to locate the SI control flags in sbtml */ +#define SBTML_SICF_SHIFT 16 + +/* sbtmstatehigh */ +#define SBTMH_SERR 0x0001 /* serror */ +#define SBTMH_INT 0x0002 /* interrupt */ +#define SBTMH_BUSY 0x0004 /* busy */ +#define SBTMH_TO 0x0020 /* timeout (sonics >= 2.3) */ +/* Shift to locate the SI status flags in sbtmh */ +#define SBTMH_SISF_SHIFT 16 + +/* sbidlow */ +#define SBIDL_INIT 0x80 /* initiator */ + struct chip_info { u32 chip; u32 chiprev; @@ -108,6 +133,9 @@ struct sbconfig { u32 sbidhigh; /* identification */ }; + +extern void brcmf_sdio_chip_coredisable(struct brcmf_sdio_dev *sdiodev, + u32 corebase); extern int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, u32 regs); -- 2.20.1