From 2c2dc1619e429c30356d76d29e93576ba031a80c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 17 Jan 2014 01:32:13 +0300 Subject: [PATCH] DT: net: davinci_emac: "phy-handle" property is actually optional Though described as required, the "phy-handle" property for the DaVinci EMAC binding is actually optional, as the driver will happily function without it, assuming 100/FULL link; the property is not specified either in the example device node, or in the actual EMAC device nodes for DA850 and AM3517 device trees. Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/davinci_emac.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt index bad381faf036..ca0911a20e8b 100644 --- a/Documentation/devicetree/bindings/net/davinci_emac.txt +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -12,8 +12,6 @@ Required properties: - ti,davinci-ctrl-ram-size: size of control module ram - ti,davinci-rmii-en: use RMII - ti,davinci-no-bd-ram: has the emac controller BD RAM -- phy-handle: Contains a phandle to an Ethernet PHY. - if not, davinci_emac driver defaults to 100/FULL - interrupts: interrupt mapping for the davinci emac interrupts sources: 4 sources: Optional properties: +- phy-handle: Contains a phandle to an Ethernet PHY. + If absent, davinci_emac driver defaults to 100/FULL. - local-mac-address : 6 bytes, mac address Example (enbw_cmc board): -- 2.20.1