From 2ba1b163c9d5d716fb1061f3fb76832cc6eea37f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 27 Aug 2014 17:04:47 -0700 Subject: [PATCH] net: phy: add generic UniMAC MDIO bus driver Add a generic UniMAC MDIO bus driver and its Device Tree binding, which can be used by the BCMGENET driver as-is, and the upcoming Starfighter 2 Ethernet switch MDIO bus controller. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- .../bindings/net/broadcom-mdio-unimac.txt | 39 ++++ drivers/net/phy/Kconfig | 8 + drivers/net/phy/Makefile | 1 + drivers/net/phy/mdio-bcm-unimac.c | 212 ++++++++++++++++++ 4 files changed, 260 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt create mode 100644 drivers/net/phy/mdio-bcm-unimac.c diff --git a/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt b/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt new file mode 100644 index 000000000000..ab0bb4247d14 --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt @@ -0,0 +1,39 @@ +* Broadcom UniMAC MDIO bus controller + +Required properties: +- compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2", + "brcm,genet-mdio-v3", "brcm,genet-mdio-v4" or "brcm,unimac-mdio" +- reg: address and length of the regsiter set for the device, first one is the + base register, and the second one is optional and for indirect accesses to + larger than 16-bits MDIO transactions +- reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw" +- #size-cells: must be 1 +- #address-cells: must be 0 + +Optional properties: +- interrupts: must be one if the interrupt is shared with the Ethernet MAC or + Ethernet switch this MDIO block is integrated from, or must be two, if there + are two separate interrupts, first one must be "mdio done" and second must be + for "mdio error" +- interrupt-names: must be "mdio_done_error" when there is a share interrupt fed + to this hardware block, or must be "mdio_done" for the first interrupt and + "mdio_error" for the second when there are separate interrupts + +Child nodes of this MDIO bus controller node are standard Ethernet PHY device +nodes as described in Documentation/devicetree/bindings/net/phy.txt + +Example: + +mdio@403c0 { + compatible = "brcm,unimac-mdio"; + reg = <0x403c0 0x8 0x40300 0x18>; + reg-names = "mdio", "mdio_indir_rw"; + #size-cells = <1>; + #address-cells = <0>; + + ... + phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 65de0cab8d07..28437ab9c7bd 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -205,6 +205,14 @@ config MDIO_BUS_MUX_MMIOREG Currently, only 8-bit registers are supported. +config MDIO_BCM_UNIMAC + tristate "Broadcom UniMAC MDIO bus controller" + help + This module provides a driver for the Broadcom UniMAC MDIO busses. + This hardware can be found in the Broadcom GENET Ethernet MAC + controllers as well as some Broadcom Ethernet switches such as the + Starfighter 2 switches. + endif # PHYLIB config MICREL_KS8995MA diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 7dc3d5b304cf..eb3b18b5978b 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -34,3 +34,4 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o obj-$(CONFIG_AMD_XGBE_PHY) += amd-xgbe-phy.o +obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c new file mode 100644 index 000000000000..e6b08ceb9c37 --- /dev/null +++ b/drivers/net/phy/mdio-bcm-unimac.c @@ -0,0 +1,212 @@ +/* + * Broadcom UniMAC MDIO bus controller driver + * + * Copyright (C) 2014, Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define MDIO_CMD 0x00 +#define MDIO_START_BUSY (1 << 29) +#define MDIO_READ_FAIL (1 << 28) +#define MDIO_RD (2 << 26) +#define MDIO_WR (1 << 26) +#define MDIO_PMD_SHIFT 21 +#define MDIO_PMD_MASK 0x1F +#define MDIO_REG_SHIFT 16 +#define MDIO_REG_MASK 0x1F + +#define MDIO_CFG 0x04 +#define MDIO_C22 (1 << 0) +#define MDIO_C45 0 +#define MDIO_CLK_DIV_SHIFT 4 +#define MDIO_CLK_DIV_MASK 0x3F +#define MDIO_SUPP_PREAMBLE (1 << 12) + +struct unimac_mdio_priv { + struct mii_bus *mii_bus; + void __iomem *base; +}; + +static inline void unimac_mdio_start(struct unimac_mdio_priv *priv) +{ + u32 reg; + + reg = __raw_readl(priv->base + MDIO_CMD); + reg |= MDIO_START_BUSY; + __raw_writel(reg, priv->base + MDIO_CMD); +} + +static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv) +{ + return __raw_readl(priv->base + MDIO_CMD) & MDIO_START_BUSY; +} + +static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct unimac_mdio_priv *priv = bus->priv; + unsigned int timeout = 1000; + u32 cmd; + + /* Prepare the read operation */ + cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT); + __raw_writel(cmd, priv->base + MDIO_CMD); + + /* Start MDIO transaction */ + unimac_mdio_start(priv); + + do { + if (!unimac_mdio_busy(priv)) + break; + + usleep_range(1000, 2000); + } while (timeout--); + + if (!timeout) + return -ETIMEDOUT; + + cmd = __raw_readl(priv->base + MDIO_CMD); + if (cmd & MDIO_READ_FAIL) + return -EIO; + + return cmd & 0xffff; +} + +static int unimac_mdio_write(struct mii_bus *bus, int phy_id, + int reg, u16 val) +{ + struct unimac_mdio_priv *priv = bus->priv; + unsigned int timeout = 1000; + u32 cmd; + + /* Prepare the write operation */ + cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | + (reg << MDIO_REG_SHIFT) | (0xffff & val); + __raw_writel(cmd, priv->base + MDIO_CMD); + + unimac_mdio_start(priv); + + do { + if (!unimac_mdio_busy(priv)) + break; + + usleep_range(1000, 2000); + } while (timeout--); + + if (!timeout) + return -ETIMEDOUT; + + return 0; +} + +static int unimac_mdio_probe(struct platform_device *pdev) +{ + struct unimac_mdio_priv *priv; + struct device_node *np; + struct mii_bus *bus; + struct resource *r; + int ret; + + np = pdev->dev.of_node; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* Just ioremap, as this MDIO block is usually integrated into an + * Ethernet MAC controller register range + */ + priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (!priv->base) { + dev_err(&pdev->dev, "failed to remap register\n"); + return -ENOMEM; + } + + priv->mii_bus = mdiobus_alloc(); + if (!priv->mii_bus) + return -ENOMEM; + + bus = priv->mii_bus; + bus->priv = priv; + bus->name = "unimac MII bus"; + bus->parent = &pdev->dev; + bus->read = unimac_mdio_read; + bus->write = unimac_mdio_write; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name); + + bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); + if (!bus->irq) { + ret = -ENOMEM; + goto out_mdio_free; + } + + ret = of_mdiobus_register(bus, np); + if (ret) { + dev_err(&pdev->dev, "MDIO bus registration failed\n"); + goto out_mdio_irq; + } + + platform_set_drvdata(pdev, priv); + + dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus at 0x%p\n", priv->base); + + return 0; + +out_mdio_irq: + kfree(bus->irq); +out_mdio_free: + mdiobus_free(bus); + return ret; +} + +static int unimac_mdio_remove(struct platform_device *pdev) +{ + struct unimac_mdio_priv *priv = platform_get_drvdata(pdev); + + mdiobus_unregister(priv->mii_bus); + kfree(priv->mii_bus->irq); + mdiobus_free(priv->mii_bus); + + return 0; +} + +static struct of_device_id unimac_mdio_ids[] = { + { .compatible = "brcm,genet-mdio-v4", }, + { .compatible = "brcm,genet-mdio-v3", }, + { .compatible = "brcm,genet-mdio-v2", }, + { .compatible = "brcm,genet-mdio-v1", }, + { .compatible = "brcm,unimac-mdio", }, +}; + +static struct platform_driver unimac_mdio_driver = { + .driver = { + .name = "unimac-mdio", + .owner = THIS_MODULE, + .of_match_table = unimac_mdio_ids, + }, + .probe = unimac_mdio_probe, + .remove = unimac_mdio_remove, +}; +module_platform_driver(unimac_mdio_driver); + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:unimac-mdio"); -- 2.20.1