From 2b9d49d8c749ce3c8f5cb28f54875a6f33fa1f72 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 12 Apr 2016 10:34:02 +0100 Subject: [PATCH] ARM: dts: db600c: add support to magnetometer This patch adds support to on board LIS3MDLTR magnetometer. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- .../boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi | 8 ++++++++ arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 13 +++++++++++++ 2 files changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi index 3b55bb97c696..a3efb9704fcd 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi @@ -31,6 +31,14 @@ output-low; }; }; + + magneto_pins: magneto-pins { + mux { + pins = "gpio31", "gpio48"; + function = "gpio"; + bias-disable; + }; + }; }; &pm8921_mpps { diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts index 34bb4157872e..e01b27ea7fba 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts @@ -153,6 +153,19 @@ /* On Low speed expansion and Sensors */ label = "LS-I2C0"; status = "okay"; + lis3mdl_mag@1e { + compatible = "st,lis3mdl-magn"; + reg = <0x1e>; + vdd-supply = <&vcc3v3>; + vddio-supply = <&pm8921_s4>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_pins>; + interrupt-parent = <&tlmm_pinmux>; + + st,drdy-int-pin = <2>; + interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ + <31 IRQ_TYPE_EDGE_RISING>; /* INT */ + }; }; }; -- 2.20.1