From 2b49abac5855aff9b42cf2cdb5376ac805bebd86 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 26 Apr 2005 15:37:45 +0100 Subject: [PATCH] [PATCH] Serial: Convert 8250_hp300 to use serial8250_{un,}register_port Convert 8250_hp300 to use serial8250_register_port() and serial8250_unregister_port(). Tested by Kars de Jong, 4/4/2005. Signed-off-by: Russell King --- drivers/serial/8250_hp300.c | 53 +++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 26 deletions(-) diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c index b8d51eb56bff..4315afe9c080 100644 --- a/drivers/serial/8250_hp300.c +++ b/drivers/serial/8250_hp300.c @@ -9,15 +9,15 @@ #include #include #include -#include #include -#include #include #include #include #include #include +#include "8250.h" + #if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) #warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? #endif @@ -163,7 +163,7 @@ int __init hp300_setup_serial_console(void) static int __devinit hpdca_init_one(struct dio_dev *d, const struct dio_device_id *ent) { - struct serial_struct serial_req; + struct uart_port port; int line; #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -172,21 +172,22 @@ static int __devinit hpdca_init_one(struct dio_dev *d, return 0; } #endif - memset(&serial_req, 0, sizeof(struct serial_struct)); + memset(&port, 0, sizeof(struct uart_port)); /* Memory mapped I/O */ - serial_req.io_type = SERIAL_IO_MEM; - serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; - serial_req.irq = d->ipl; - serial_req.baud_base = HPDCA_BAUD_BASE; - serial_req.iomap_base = (d->resource.start + UART_OFFSET); - serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE); - serial_req.iomem_reg_shift = 1; - line = register_serial(&serial_req); + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.irq = d->ipl; + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (d->resource.start + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.dev = &d->dev; + line = serial8250_register_port(&port); if (line < 0) { printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" - " irq %d failed\n", d->scode, serial_req.irq); + " irq %d failed\n", d->scode, port.irq); return -ENOMEM; } @@ -209,7 +210,7 @@ static int __init hp300_8250_init(void) #ifdef CONFIG_HPAPCI int line; unsigned long base; - struct serial_struct serial_req; + struct uart_port uport; struct hp300_port *port; int i; #endif @@ -251,25 +252,25 @@ static int __init hp300_8250_init(void) if (!port) return -ENOMEM; - memset(&serial_req, 0, sizeof(struct serial_struct)); + memset(&uport, 0, sizeof(struct uart_port)); base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); /* Memory mapped I/O */ - serial_req.io_type = SERIAL_IO_MEM; - serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + uport.iotype = UPIO_MEM; + uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; /* XXX - no interrupt support yet */ - serial_req.irq = 0; - serial_req.baud_base = HPAPCI_BAUD_BASE; - serial_req.iomap_base = base; - serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE); - serial_req.iomem_reg_shift = 2; + uport.irq = 0; + uport.uartclk = HPAPCI_BAUD_BASE * 16; + uport.mapbase = base; + uport.membase = (char *)(base + DIO_VIRADDRBASE); + uport.regshift = 2; - line = register_serial(&serial_req); + line = serial8250_register_port(&uport); if (line < 0) { printk(KERN_NOTICE "8250_hp300: register_serial() APCI %d" - " irq %d failed\n", i, serial_req.irq); + " irq %d failed\n", i, uport.irq); kfree(port); continue; } @@ -299,7 +300,7 @@ static void __devexit hpdca_remove_one(struct dio_dev *d) /* Disable board-interrupts */ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0); } - unregister_serial(line); + serial8250_unregister_port(line); } #endif @@ -309,7 +310,7 @@ static void __exit hp300_8250_exit(void) struct hp300_port *port, *to_free; for (port = hp300_ports; port; ) { - unregister_serial(port->line); + serial8250_unregister_port(port->line); to_free = port; port = port->next; kfree(to_free); -- 2.20.1