From 2b3d0c19537c1bd0d493e302b7949460901ef489 Mon Sep 17 00:00:00 2001 From: Yi Li Date: Mon, 17 Oct 2016 18:38:53 +1030 Subject: [PATCH] hwmon: (adm1275) Enable adm1278 VOUT sampling The adm1278 can optionally monitor the VOUT pin. This functionality is not enabled at reset, so PMON_CONFIG needs to be modified in order to enable it. Signed-off-by: Yi Li Signed-off-by: Joel Stanley Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1275.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index 3baa4f4a8c5e..4ab5293c7bf0 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -499,15 +499,27 @@ static int adm1275_probe(struct i2c_client *client, pindex = 2; tindex = 3; - info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT; + info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + + /* Enable VOUT if not enabled (it is disabled by default) */ + if (!(config & ADM1278_VOUT_EN)) { + config |= ADM1278_VOUT_EN; + ret = i2c_smbus_write_byte_data(client, + ADM1275_PMON_CONFIG, + config); + if (ret < 0) { + dev_err(&client->dev, + "Failed to enable VOUT monitoring\n"); + return -ENODEV; + } + } + if (config & ADM1278_TEMP1_EN) info->func[0] |= PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; if (config & ADM1278_VIN_EN) info->func[0] |= PMBUS_HAVE_VIN; - if (config & ADM1278_VOUT_EN) - info->func[0] |= - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; break; case adm1293: case adm1294: -- 2.20.1