From 28c5a41e4aa44f162297d596030900b90aa1cf08 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 1 Mar 2016 14:25:41 +0800 Subject: [PATCH] gpio: mcp23s08: Add support for mcp23s18 This patch adds support for the mcp23s18 which is very similar to the mcp23s17. A couple of control bits are not the same. Notable IOCON_HAEN (s17 only) & IOCON_INTCC. Which can be ignored. Patch changes the following: - Add mcp23s18 types. - Always set mirror bit if the dts defines mcp23s18. regardless of type. Mirror bit is ignored on 8 bit devices anyway. - In mcp23s08_probe use chip.ngpio instead of logic based on type to determine number of gpio lins to increment by. This is set appropiately by the call to mcp23s08_probe_one. - Add mcp23s18 to device tree documentation. - Remove statement that irqs don't work for spi. They do. Tested with mcp23s18. Signed-off-by: Phil Reid Acked-by: Rob Herring Signed-off-by: Linus Walleij --- .../bindings/gpio/gpio-mcp23s08.txt | 4 +--- drivers/gpio/gpio-mcp23s08.c | 19 +++++++++++++++---- 2 files changed, 16 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt index f3332b9a8ed4..c934106b10aa 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt @@ -10,6 +10,7 @@ Required properties: - "microchip,mcp23s08" for 8 GPIO SPI version - "microchip,mcp23s17" for 16 GPIO SPI version + - "microchip,mcp23s18" for 16 GPIO SPI version - "microchip,mcp23008" for 8 GPIO I2C version or - "microchip,mcp23017" for 16 GPIO I2C version of the chip NOTE: Do not use the old mcp prefix any more. It is deprecated and will be @@ -43,9 +44,6 @@ Optional properties: - first cell is the pin number - second cell is used to specify flags. - interrupt-controller: Marks the device node as a interrupt controller. -NOTE: The interrupt functionality is only supported for i2c versions of the -chips. The spi chips can also do the interrupts, but this is not supported by -the linux driver yet. Optional device specific properties: - microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index f8d4abcff573..971915830d7f 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -31,6 +31,7 @@ #define MCP_TYPE_S17 1 #define MCP_TYPE_008 2 #define MCP_TYPE_017 3 +#define MCP_TYPE_S18 4 /* Registers are all 8 bits wide. * @@ -617,6 +618,12 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, mcp->chip.ngpio = 16; mcp->chip.label = "mcp23s17"; break; + + case MCP_TYPE_S18: + mcp->ops = &mcp23s17_ops; + mcp->chip.ngpio = 16; + mcp->chip.label = "mcp23s18"; + break; #endif /* CONFIG_SPI_MASTER */ #if IS_ENABLED(CONFIG_I2C) @@ -657,8 +664,7 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, of_property_read_bool(mcp->chip.parent->of_node, "microchip,irq-active-high"); - if (type == MCP_TYPE_017) - mirror = pdata->mirror; + mirror = pdata->mirror; } if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror || @@ -735,6 +741,10 @@ static const struct of_device_id mcp23s08_spi_of_match[] = { .compatible = "microchip,mcp23s17", .data = (void *) MCP_TYPE_S17, }, + { + .compatible = "microchip,mcp23s18", + .data = (void *) MCP_TYPE_S18, + }, /* NOTE: The use of the mcp prefix is deprecated and will be removed. */ { .compatible = "mcp,mcp23s08", @@ -971,8 +981,8 @@ static int mcp23s08_probe(struct spi_device *spi) goto fail; if (pdata->base != -1) - pdata->base += (type == MCP_TYPE_S17) ? 16 : 8; - ngpio += (type == MCP_TYPE_S17) ? 16 : 8; + pdata->base += data->mcp[addr]->chip.ngpio; + ngpio += data->mcp[addr]->chip.ngpio; } data->ngpio = ngpio; @@ -1014,6 +1024,7 @@ static int mcp23s08_remove(struct spi_device *spi) static const struct spi_device_id mcp23s08_ids[] = { { "mcp23s08", MCP_TYPE_S08 }, { "mcp23s17", MCP_TYPE_S17 }, + { "mcp23s18", MCP_TYPE_S18 }, { }, }; MODULE_DEVICE_TABLE(spi, mcp23s08_ids); -- 2.20.1