From 27bfa8893b15a3fa22a593c90a48c8bcb1f9c75b Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Thu, 23 Jun 2016 16:39:44 +0900 Subject: [PATCH] regulator: pwm: Support for enable GPIO Add an optional enable GPIO to the pwm-regulator driver. Signed-off-by: Alexandre Courbot Signed-off-by: Mark Brown --- .../bindings/regulator/pwm-regulator.txt | 7 ++++- drivers/regulator/pwm-regulator.c | 26 +++++++++++++++++++ 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index ed936f0f34f2..dd6f59cf1455 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -38,13 +38,18 @@ NB: To be clear, if voltage-table is provided, then the device will be used in Voltage Table Mode. If no voltage-table is provided, then the device will be used in Continuous Voltage Mode. +Optional properties: +-------------------- +- enable-gpios: GPIO to use to enable/disable the regulator + Any property defined as part of the core regulator binding can also be used. (See: ../regulator/regulator.txt) -Continuous Voltage Example: +Continuous Voltage With Enable GPIO Example: pwm_regulator { compatible = "pwm-regulator; pwms = <&pwm1 0 8448 0>; + enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <1016000>; regulator-max-microvolt = <1114000>; regulator-name = "vdd_logic"; diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index ab3cc0235843..90f8b7fd0437 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -20,6 +20,7 @@ #include #include #include +#include struct pwm_regulator_data { /* Shared */ @@ -38,6 +39,9 @@ struct pwm_regulator_data { /* Continuous voltage */ int volt_uV; + + /* Enable GPIO */ + struct gpio_desc *enb_gpio; }; struct pwm_voltages { @@ -94,6 +98,9 @@ static int pwm_regulator_enable(struct regulator_dev *dev) { struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + if (drvdata->enb_gpio) + gpiod_set_value_cansleep(drvdata->enb_gpio, 1); + return pwm_enable(drvdata->pwm); } @@ -103,6 +110,9 @@ static int pwm_regulator_disable(struct regulator_dev *dev) pwm_disable(drvdata->pwm); + if (drvdata->enb_gpio) + gpiod_set_value_cansleep(drvdata->enb_gpio, 0); + return 0; } @@ -110,6 +120,9 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev) { struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + if (drvdata->enb_gpio && !gpiod_get_value_cansleep(drvdata->enb_gpio)) + return false; + return pwm_is_enabled(drvdata->pwm); } @@ -248,6 +261,7 @@ static int pwm_regulator_probe(struct platform_device *pdev) struct regulator_dev *regulator; struct regulator_config config = { }; struct device_node *np = pdev->dev.of_node; + enum gpiod_flags gpio_flags; int ret; if (!np) { @@ -285,6 +299,18 @@ static int pwm_regulator_probe(struct platform_device *pdev) return ret; } + if (init_data->constraints.boot_on || init_data->constraints.always_on) + gpio_flags = GPIOD_OUT_HIGH; + else + gpio_flags = GPIOD_OUT_LOW; + drvdata->enb_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", + gpio_flags); + if (IS_ERR(drvdata->enb_gpio)) { + ret = PTR_ERR(drvdata->enb_gpio); + dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret); + return ret; + } + /* * FIXME: pwm_apply_args() should be removed when switching to the * atomic PWM API. -- 2.20.1