From 2728b2d2e5be4b828a523a06089cd605419fc65c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 2 Feb 2017 01:32:13 +0100 Subject: [PATCH] PM / core / docs: Convert sleep states API document to reST Move the document describing the system sleep state transitions API for devices to Documentation/driver-api/pm/, convert it to reST and update it to use current terminology. Also remove the remaining reference to the old version of it from pm.h. The new document still contains references to some documents in the .txt format that will be converted later. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jonathan Corbet --- Documentation/driver-api/index.rst | 1 + Documentation/driver-api/pm/conf.py | 10 + .../devices.txt => driver-api/pm/devices.rst} | 696 +++++++++--------- Documentation/driver-api/pm/index.rst | 15 + Documentation/driver-api/pm/types.rst | 5 + include/linux/pm.h | 3 - 6 files changed, 387 insertions(+), 343 deletions(-) create mode 100644 Documentation/driver-api/pm/conf.py rename Documentation/{power/devices.txt => driver-api/pm/devices.rst} (50%) create mode 100644 Documentation/driver-api/pm/index.rst create mode 100644 Documentation/driver-api/pm/types.rst diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 9cdf81b59ec5..ea580c0aa232 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -16,6 +16,7 @@ available subsections can be seen below. basics infrastructure + pm/index device-io dma-buf device_link diff --git a/Documentation/driver-api/pm/conf.py b/Documentation/driver-api/pm/conf.py new file mode 100644 index 000000000000..a89fac11272f --- /dev/null +++ b/Documentation/driver-api/pm/conf.py @@ -0,0 +1,10 @@ +# -*- coding: utf-8; mode: python -*- + +project = "Device Power Management" + +tags.add("subproject") + +latex_documents = [ + ('index', 'pm.tex', project, + 'The kernel development community', 'manual'), +] diff --git a/Documentation/power/devices.txt b/Documentation/driver-api/pm/devices.rst similarity index 50% rename from Documentation/power/devices.txt rename to Documentation/driver-api/pm/devices.rst index 73ddea39a9ce..f165cf6f733e 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/driver-api/pm/devices.rst @@ -1,9 +1,14 @@ -Device Power Management +.. |struct| replace:: :c:type:`struct` -Copyright (c) 2010-2011 Rafael J. Wysocki , Novell Inc. -Copyright (c) 2010 Alan Stern -Copyright (c) 2014 Intel Corp., Rafael J. Wysocki +============================== +Device Power Management Basics +============================== +:: + + Copyright (c) 2010-2011 Rafael J. Wysocki , Novell Inc. + Copyright (c) 2010 Alan Stern + Copyright (c) 2016 Intel Corp., Rafael J. Wysocki Most of the code in Linux is device drivers, so most of the Linux power management (PM) code is also driver-specific. Most drivers will do very @@ -18,10 +23,12 @@ background for the domain-specific work you'd do with any specific driver. Two Models for Device Power Management ====================================== + Drivers will use one or both of these models to put devices into low-power states: System Sleep model: + Drivers can enter low-power states as part of entering system-wide low-power states like "suspend" (also known as "suspend-to-RAM"), or (mostly for systems with disks) "hibernation" (also known as @@ -34,12 +41,13 @@ states: Some drivers can manage hardware wakeup events, which make the system leave the low-power state. This feature may be enabled or disabled - using the relevant /sys/devices/.../power/wakeup file (for Ethernet - drivers the ioctl interface used by ethtool may also be used for this - purpose); enabling it may cost some power usage, but let the whole - system enter low-power states more often. + using the relevant :file:`/sys/devices/.../power/wakeup` file (for + Ethernet drivers the ioctl interface used by ethtool may also be used + for this purpose); enabling it may cost some power usage, but let the + whole system enter low-power states more often. Runtime Power Management model: + Devices may also be put into low-power states while the system is running, independently of other power management activity in principle. However, devices are not generally independent of each other (for @@ -73,9 +81,9 @@ Examples of hardware wakeup events include an alarm from a real time clock, network wake-on-LAN packets, keyboard or mouse activity, and media insertion or removal (for PCMCIA, MMC/SD, USB, and so on). - Interfaces for Entering System Sleep States =========================================== + There are programming interfaces provided for subsystems (bus type, device type, device class) and device drivers to allow them to participate in the power management of devices they are concerned with. These interfaces cover both @@ -84,58 +92,35 @@ system sleep and runtime power management. Device Power Management Operations ---------------------------------- + Device power management operations, at the subsystem level as well as at the device driver level, are implemented by defining and populating objects of type -struct dev_pm_ops: - -struct dev_pm_ops { - int (*prepare)(struct device *dev); - void (*complete)(struct device *dev); - int (*suspend)(struct device *dev); - int (*resume)(struct device *dev); - int (*freeze)(struct device *dev); - int (*thaw)(struct device *dev); - int (*poweroff)(struct device *dev); - int (*restore)(struct device *dev); - int (*suspend_late)(struct device *dev); - int (*resume_early)(struct device *dev); - int (*freeze_late)(struct device *dev); - int (*thaw_early)(struct device *dev); - int (*poweroff_late)(struct device *dev); - int (*restore_early)(struct device *dev); - int (*suspend_noirq)(struct device *dev); - int (*resume_noirq)(struct device *dev); - int (*freeze_noirq)(struct device *dev); - int (*thaw_noirq)(struct device *dev); - int (*poweroff_noirq)(struct device *dev); - int (*restore_noirq)(struct device *dev); - int (*runtime_suspend)(struct device *dev); - int (*runtime_resume)(struct device *dev); - int (*runtime_idle)(struct device *dev); -}; - -This structure is defined in include/linux/pm.h and the methods included in it -are also described in that file. Their roles will be explained in what follows. -For now, it should be sufficient to remember that the last three methods are +|struct| :c:type:`dev_pm_ops` defined in :file:`include/linux/pm.h`. +The roles of the methods included in it will be explained in what follows. For +now, it should be sufficient to remember that the last three methods are specific to runtime power management while the remaining ones are used during system-wide power transitions. There also is a deprecated "old" or "legacy" interface for power management operations available at least for some subsystems. This approach does not use -struct dev_pm_ops objects and it is suitable only for implementing system sleep -power management methods. Therefore it is not described in this document, so -please refer directly to the source code for more information about it. +|struct| :c:type:`dev_pm_ops` objects and it is suitable only for implementing +system sleep power management methods in a limited way. Therefore it is not +described in this document, so please refer directly to the source code for more +information about it. Subsystem-Level Methods ----------------------- -The core methods to suspend and resume devices reside in struct dev_pm_ops -pointed to by the ops member of struct dev_pm_domain, or by the pm member of -struct bus_type, struct device_type and struct class. They are mostly of -interest to the people writing infrastructure for platforms and buses, like PCI -or USB, or device type and device class drivers. They also are relevant to the -writers of device drivers whose subsystems (PM domains, device types, device -classes and bus types) don't provide all power management methods. + +The core methods to suspend and resume devices reside in +|struct| :c:type:`dev_pm_ops` pointed to by the :c:member:`ops` +member of |struct| :c:type:`dev_pm_domain`, or by the :c:member:`pm` +member of |struct| :c:type:`bus_type`, |struct| :c:type:`device_type` and +|struct| :c:type:`class`. They are mostly of interest to the people writing +infrastructure for platforms and buses, like PCI or USB, or device type and +device class drivers. They also are relevant to the writers of device drivers +whose subsystems (PM domains, device types, device classes and bus types) don't +provide all power management methods. Bus drivers implement these methods as appropriate for the hardware and the drivers using it; PCI works differently from USB, and so on. Not many people @@ -147,49 +132,52 @@ they are called in phases for every device, respecting the parent-child sequencing in the driver model tree. -/sys/devices/.../power/wakeup files ------------------------------------ +:file:`/sys/devices/.../power/wakeup` files +------------------------------------------- + All device objects in the driver model contain fields that control the handling of system wakeup events (hardware signals that can force the system out of a sleep state). These fields are initialized by bus or device driver code using -device_set_wakeup_capable() and device_set_wakeup_enable(), defined in -include/linux/pm_wakeup.h. - -The "power.can_wakeup" flag just records whether the device (and its driver) can -physically support wakeup events. The device_set_wakeup_capable() routine -affects this flag. The "power.wakeup" field is a pointer to an object of type -struct wakeup_source used for controlling whether or not the device should use -its system wakeup mechanism and for notifying the PM core of system wakeup -events signaled by the device. This object is only present for wakeup-capable -devices (i.e. devices whose "can_wakeup" flags are set) and is created (or -removed) by device_set_wakeup_capable(). +:c:func:`device_set_wakeup_capable()` and :c:func:`device_set_wakeup_enable()`, +defined in :file:`include/linux/pm_wakeup.h`. + +The :c:member:`power.can_wakeup` flag just records whether the device (and its +driver) can physically support wakeup events. The +:c:func:`device_set_wakeup_capable()` routine affects this flag. The +:c:member:`power.wakeup` field is a pointer to an object of type +|struct| :c:type:`wakeup_source` used for controlling whether or not +the device should use its system wakeup mechanism and for notifying the +PM core of system wakeup events signaled by the device. This object is only +present for wakeup-capable devices (i.e. devices whose +:c:member:`can_wakeup` flags are set) and is created (or removed) by +:c:func:`device_set_wakeup_capable()`. Whether or not a device is capable of issuing wakeup events is a hardware matter, and the kernel is responsible for keeping track of it. By contrast, whether or not a wakeup-capable device should issue wakeup events is a policy decision, and it is managed by user space through a sysfs attribute: the -"power/wakeup" file. User space can write the strings "enabled" or "disabled" -to it to indicate whether or not, respectively, the device is supposed to signal -system wakeup. This file is only present if the "power.wakeup" object exists -for the given device and is created (or removed) along with that object, by -device_set_wakeup_capable(). Reads from the file will return the corresponding -string. - -The "power/wakeup" file is supposed to contain the "disabled" string initially -for the majority of devices; the major exceptions are power buttons, keyboards, -and Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with -ethtool. It should also default to "enabled" for devices that don't generate -wakeup requests on their own but merely forward wakeup requests from one bus to -another (like PCI Express ports). - -The device_may_wakeup() routine returns true only if the "power.wakeup" object -exists and the corresponding "power/wakeup" file contains the string "enabled". -This information is used by subsystems, like the PCI bus type code, to see -whether or not to enable the devices' wakeup mechanisms. If device wakeup -mechanisms are enabled or disabled directly by drivers, they also should use -device_may_wakeup() to decide what to do during a system sleep transition. -Device drivers, however, are not supposed to call device_set_wakeup_enable() -directly in any case. +:file:`power/wakeup` file. User space can write the "enabled" or "disabled" +strings to it to indicate whether or not, respectively, the device is supposed +to signal system wakeup. This file is only present if the +:c:member:`power.wakeup` object exists for the given device and is created (or +removed) along with that object, by :c:func:`device_set_wakeup_capable()`. +Reads from the file will return the corresponding string. + +The initial value in the :file:`power/wakeup` file is "disabled" for the +majority of devices; the major exceptions are power buttons, keyboards, and +Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with ethtool. +It should also default to "enabled" for devices that don't generate wakeup +requests on their own but merely forward wakeup requests from one bus to another +(like PCI Express ports). + +The :c:func:`device_may_wakeup()` routine returns true only if the +:c:member:`power.wakeup` object exists and the corresponding :file:`power/wakeup` +file contains the "enabled" string. This information is used by subsystems, +like the PCI bus type code, to see whether or not to enable the devices' wakeup +mechanisms. If device wakeup mechanisms are enabled or disabled directly by +drivers, they also should use :c:func:`device_may_wakeup()` to decide what to do +during a system sleep transition. Device drivers, however, are not expected to +call :c:func:`device_set_wakeup_enable()` directly in any case. It ought to be noted that system wakeup is conceptually different from "remote wakeup" used by runtime power management, although it may be supported by the @@ -201,32 +189,38 @@ some systems it is impossible to trigger them from system sleep states. In any case, remote wakeup should always be enabled for runtime power management for all devices and drivers that support it. -/sys/devices/.../power/control files ------------------------------------- + +:file:`/sys/devices/.../power/control` files +-------------------------------------------- + Each device in the driver model has a flag to control whether it is subject to -runtime power management. This flag, called runtime_auto, is initialized by the -bus type (or generally subsystem) code using pm_runtime_allow() or -pm_runtime_forbid(); the default is to allow runtime power management. +runtime power management. This flag, :c:member:`runtime_auto`, is initialized +by the bus type (or generally subsystem) code using :c:func:`pm_runtime_allow()` +or :c:func:`pm_runtime_forbid()`; the default is to allow runtime power +management. The setting can be adjusted by user space by writing either "on" or "auto" to -the device's power/control sysfs file. Writing "auto" calls pm_runtime_allow(), -setting the flag and allowing the device to be runtime power-managed by its -driver. Writing "on" calls pm_runtime_forbid(), clearing the flag, returning -the device to full power if it was in a low-power state, and preventing the +the device's :file:`power/control` sysfs file. Writing "auto" calls +:c:func:`pm_runtime_allow()`, setting the flag and allowing the device to be +runtime power-managed by its driver. Writing "on" calls +:c:func:`pm_runtime_forbid()`, clearing the flag, returning the device to full +power if it was in a low-power state, and preventing the device from being runtime power-managed. User space can check the current value -of the runtime_auto flag by reading the file. +of the :c:member:`runtime_auto` flag by reading that file. -The device's runtime_auto flag has no effect on the handling of system-wide -power transitions. In particular, the device can (and in the majority of cases -should and will) be put into a low-power state during a system-wide transition -to a sleep state even though its runtime_auto flag is clear. +The device's :c:member:`runtime_auto` flag has no effect on the handling of +system-wide power transitions. In particular, the device can (and in the +majority of cases should and will) be put into a low-power state during a +system-wide transition to a sleep state even though its :c:member:`runtime_auto` +flag is clear. For more information about the runtime power management framework, refer to -Documentation/power/runtime_pm.txt. +:file:`Documentation/power/runtime_pm.txt`. Calling Drivers to Enter and Leave System Sleep States ====================================================== + When the system goes into a sleep state, each device's driver is asked to suspend the device by putting it into a state compatible with the target system state. That's usually some version of "off", but the details are @@ -248,17 +242,18 @@ events. Call Sequence Guarantees ------------------------ + To ensure that bridges and similar links needing to talk to a device are -available when the device is suspended or resumed, the device tree is +available when the device is suspended or resumed, the device hierarchy is walked in a bottom-up order to suspend devices. A top-down order is used to resume those devices. -The ordering of the device tree is defined by the order in which devices +The ordering of the device hierarchy is defined by the order in which devices get registered: a child can never be registered, probed or resumed before its parent; and can't be removed or suspended after that parent. -The policy is that the device tree should match hardware bus topology. -(Or at least the control bus, for devices which use multiple busses.) +The policy is that the device hierarchy should match hardware bus topology. +[Or at least the control bus, for devices which use multiple busses.] In particular, this means that a device registration may fail if the parent of the device is suspending (i.e. has been chosen by the PM core as the next device to suspend) or has already suspended, as well as after all of the other @@ -268,61 +263,65 @@ situations. System Power Management Phases ------------------------------ + Suspending or resuming the system is done in several phases. Different phases -are used for freeze, standby, and memory sleep states ("suspend-to-RAM") and the -hibernation state ("suspend-to-disk"). Each phase involves executing callbacks -for every device before the next phase begins. Not all busses or classes -support all these callbacks and not all drivers use all the callbacks. The -various phases always run after tasks have been frozen and before they are -unfrozen. Furthermore, the *_noirq phases run at a time when IRQ handlers have -been disabled (except for those marked with the IRQF_NO_SUSPEND flag). +are used for suspend-to-idle, shallow (standby), and deep ("suspend-to-RAM") +sleep states and the hibernation state ("suspend-to-disk"). Each phase involves +executing callbacks for every device before the next phase begins. Not all +buses or classes support all these callbacks and not all drivers use all the +callbacks. The various phases always run after tasks have been frozen and +before they are unfrozen. Furthermore, the ``*_noirq phases`` run at a time +when IRQ handlers have been disabled (except for those marked with the +IRQF_NO_SUSPEND flag). All phases use PM domain, bus, type, class or driver callbacks (that is, methods -defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, dev->class->pm or -dev->driver->pm). These callbacks are regarded by the PM core as mutually -exclusive. Moreover, PM domain callbacks always take precedence over all of the -other callbacks and, for example, type callbacks take precedence over bus, class -and driver callbacks. To be precise, the following rules are used to determine -which callback to execute in the given phase: +defined in ``dev->pm_domain->ops``, ``dev->bus->pm``, ``dev->type->pm``, +``dev->class->pm`` or ``dev->driver->pm``). These callbacks are regarded by the +PM core as mutually exclusive. Moreover, PM domain callbacks always take +precedence over all of the other callbacks and, for example, type callbacks take +precedence over bus, class and driver callbacks. To be precise, the following +rules are used to determine which callback to execute in the given phase: - 1. If dev->pm_domain is present, the PM core will choose the callback - included in dev->pm_domain->ops for execution + 1. If ``dev->pm_domain`` is present, the PM core will choose the callback + provided by ``dev->pm_domain->ops`` for execution. - 2. Otherwise, if both dev->type and dev->type->pm are present, the callback - included in dev->type->pm will be chosen for execution. + 2. Otherwise, if both ``dev->type`` and ``dev->type->pm`` are present, the + callback provided by ``dev->type->pm`` will be chosen for execution. - 3. Otherwise, if both dev->class and dev->class->pm are present, the - callback included in dev->class->pm will be chosen for execution. + 3. Otherwise, if both ``dev->class`` and ``dev->class->pm`` are present, + the callback provided by ``dev->class->pm`` will be chosen for + execution. - 4. Otherwise, if both dev->bus and dev->bus->pm are present, the callback - included in dev->bus->pm will be chosen for execution. + 4. Otherwise, if both ``dev->bus`` and ``dev->bus->pm`` are present, the + callback provided by ``dev->bus->pm`` will be chosen for execution. This allows PM domains and device types to override callbacks provided by bus types or device classes if necessary. The PM domain, type, class and bus callbacks may in turn invoke device- or -driver-specific methods stored in dev->driver->pm, but they don't have to do +driver-specific methods stored in ``dev->driver->pm``, but they don't have to do that. If the subsystem callback chosen for execution is not present, the PM core will -execute the corresponding method from dev->driver->pm instead if there is one. +execute the corresponding method from the ``dev->driver->pm`` set instead if +there is one. Entering System Suspend ----------------------- -When the system goes into the freeze, standby or memory sleep state, -the phases are: - prepare, suspend, suspend_late, suspend_noirq. +When the system goes into the freeze, standby or memory sleep state, +the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``. - 1. The prepare phase is meant to prevent races by preventing new devices - from being registered; the PM core would never know that all the + 1. The ``prepare`` phase is meant to prevent races by preventing new + devices from being registered; the PM core would never know that all the children of a device had been suspended if new children could be - registered at will. (By contrast, devices may be unregistered at any - time.) Unlike the other suspend-related phases, during the prepare - phase the device tree is traversed top-down. + registered at will. [By contrast, from the PM core's perspective, + devices may be unregistered at any time.] Unlike the other + suspend-related phases, during the ``prepare`` phase the device + hierarchy is traversed top-down. - After the prepare callback method returns, no new children may be + After the ``->prepare`` callback method returns, no new children may be registered below the device. The method may also prepare the device or driver in some way for the upcoming system power transition, but it should not put the device into a low-power state. @@ -334,35 +333,35 @@ the phases are: runtime suspend. Namely, if the prepare callback returns a positive number and that happens for all of the descendants of the device too, and all of them (including the device itself) are runtime-suspended, the - PM core will skip the suspend, suspend_late and suspend_noirq suspend - phases as well as the resume_noirq, resume_early and resume phases of - the following system resume for all of these devices. In that case, - the complete callback will be called directly after the prepare callback - and is entirely responsible for bringing the device back to the - functional state as appropriate. + PM core will skip the ``suspend``, ``suspend_late`` and + ``suspend_noirq`` phases as well as all of the corresponding phases of + the subsequent device resume for all of these devices. In that case, + the ``->complete`` callback will be invoked directly after the + ``->prepare`` callback and is entirely responsible for putting the + device into a consistent state as appropriate. Note that this direct-complete procedure applies even if the device is disabled for runtime PM; only the runtime-PM status matters. It follows that if a device has system-sleep callbacks but does not support runtime PM, then its prepare callback must never return a positive value. This - is because all devices are initially set to runtime-suspended with + is because all such devices are initially set to runtime-suspended with runtime PM disabled. - 2. The suspend methods should quiesce the device to stop it from performing - I/O. They also may save the device registers and put it into the - appropriate low-power state, depending on the bus type the device is on, - and they may enable wakeup events. + 2. The ``->suspend`` methods should quiesce the device to stop it from + performing I/O. They also may save the device registers and put it into + the appropriate low-power state, depending on the bus type the device is + on, and they may enable wakeup events. - 3 For a number of devices it is convenient to split suspend into the + 3. For a number of devices it is convenient to split suspend into the "quiesce device" and "save device state" phases, in which cases - suspend_late is meant to do the latter. It is always executed after - runtime power management has been disabled for all devices. + ``suspend_late`` is meant to do the latter. It is always executed after + runtime power management has been disabled for the device in question. - 4. The suspend_noirq phase occurs after IRQ handlers have been disabled, + 4. The ``suspend_noirq`` phase occurs after IRQ handlers have been disabled, which means that the driver's interrupt handler will not be called while - the callback method is running. The methods should save the values of - the device's registers that weren't saved previously and finally put the - device into the appropriate low-power state. + the callback method is running. The ``->suspend_noirq`` methods should + save the values of the device's registers that weren't saved previously + and finally put the device into the appropriate low-power state. The majority of subsystems and device drivers need not implement this callback. However, bus types allowing devices to share interrupt @@ -375,65 +374,69 @@ At the end of these phases, drivers should have stopped all I/O transactions (DMA, IRQs), saved enough state that they can re-initialize or restore previous state (as needed by the hardware), and placed the device into a low-power state. On many platforms they will gate off one or more clock sources; sometimes they -will also switch off power supplies or reduce voltages. (Drivers supporting -runtime PM may already have performed some or all of these steps.) +will also switch off power supplies or reduce voltages. [Drivers supporting +runtime PM may already have performed some or all of these steps.] -If device_may_wakeup(dev) returns true, the device should be prepared for -generating hardware wakeup signals to trigger a system wakeup event when the -system is in the sleep state. For example, enable_irq_wake() might identify -GPIO signals hooked up to a switch or other external hardware, and -pci_enable_wake() does something similar for the PCI PME signal. +If :c:func:`device_may_wakeup(dev)` returns ``true``, the device should be +prepared for generating hardware wakeup signals to trigger a system wakeup event +when the system is in the sleep state. For example, :c:func:`enable_irq_wake()` +might identify GPIO signals hooked up to a switch or other external hardware, +and :c:func:`pci_enable_wake()` does something similar for the PCI PME signal. If any of these callbacks returns an error, the system won't enter the desired -low-power state. Instead the PM core will unwind its actions by resuming all +low-power state. Instead, the PM core will unwind its actions by resuming all the devices that were suspended. Leaving System Suspend ---------------------- -When resuming from freeze, standby or memory sleep, the phases are: - - resume_noirq, resume_early, resume, complete. - 1. The resume_noirq callback methods should perform any actions needed - before the driver's interrupt handlers are invoked. This generally - means undoing the actions of the suspend_noirq phase. If the bus type - permits devices to share interrupt vectors, like PCI, the method should - bring the device and its driver into a state in which the driver can - recognize if the device is the source of incoming interrupts, if any, - and handle them correctly. - - For example, the PCI bus type's ->pm.resume_noirq() puts the device into - the full-power state (D0 in the PCI terminology) and restores the +When resuming from freeze, standby or memory sleep, the phases are: +``resume_noirq``, ``resume_early``, ``resume``, ``complete``. + + 1. The ``->resume_noirq`` callback methods should perform any actions + needed before the driver's interrupt handlers are invoked. This + generally means undoing the actions of the ``suspend_noirq`` phase. If + the bus type permits devices to share interrupt vectors, like PCI, the + method should bring the device and its driver into a state in which the + driver can recognize if the device is the source of incoming interrupts, + if any, and handle them correctly. + + For example, the PCI bus type's ``->pm.resume_noirq()`` puts the device + into the full-power state (D0 in the PCI terminology) and restores the standard configuration registers of the device. Then it calls the - device driver's ->pm.resume_noirq() method to perform device-specific + device driver's ``->pm.resume_noirq()`` method to perform device-specific actions. - 2. The resume_early methods should prepare devices for the execution of - the resume methods. This generally involves undoing the actions of the - preceding suspend_late phase. + 2. The ``->resume_early`` methods should prepare devices for the execution + of the resume methods. This generally involves undoing the actions of + the preceding ``suspend_late`` phase. - 3 The resume methods should bring the device back to its operating + 3. The ``->resume`` methods should bring the device back to its operating state, so that it can perform normal I/O. This generally involves - undoing the actions of the suspend phase. - - 4. The complete phase should undo the actions of the prepare phase. Note, - however, that new children may be registered below the device as soon as - the resume callbacks occur; it's not necessary to wait until the - complete phase. - - Moreover, if the preceding prepare callback returned a positive number, - the device may have been left in runtime suspend throughout the whole - system suspend and resume (the suspend, suspend_late, suspend_noirq - phases of system suspend and the resume_noirq, resume_early, resume - phases of system resume may have been skipped for it). In that case, - the complete callback is entirely responsible for bringing the device - back to the functional state after system suspend if necessary. [For - example, it may need to queue up a runtime resume request for the device - for this purpose.] To check if that is the case, the complete callback - can consult the device's power.direct_complete flag. Namely, if that - flag is set when the complete callback is being run, it has been called - directly after the preceding prepare and special action may be required + undoing the actions of the ``suspend`` phase. + + 4. The ``complete`` phase should undo the actions of the ``prepare`` phase. + For this reason, unlike the other resume-related phases, during the + ``complete`` phase the device hierarchy is traversed bottom-up. + + Note, however, that new children may be registered below the device as + soon as the ``->resume`` callbacks occur; it's not necessary to wait + until the ``complete`` phase with that. + + Moreover, if the preceding ``->prepare`` callback returned a positive + number, the device may have been left in runtime suspend throughout the + whole system suspend and resume (the ``suspend``, ``suspend_late``, + ``suspend_noirq`` phases of system suspend and the ``resume_noirq``, + ``resume_early``, ``resume`` phases of system resume may have been + skipped for it). In that case, the ``->complete`` callback is entirely + responsible for putting the device into a consistent state after system + suspend if necessary. [For example, it may need to queue up a runtime + resume request for the device for this purpose.] To check if that is + the case, the ``->complete`` callback can consult the device's + ``power.direct_complete`` flag. Namely, if that flag is set when the + ``->complete`` callback is being run, it has been called directly after + the preceding ``->prepare`` and special actions may be required to make the device work correctly afterward. At the end of these phases, drivers should be as functional as they were before @@ -446,12 +449,14 @@ the end of resume might not be the one which preceded suspension. That means availability of certain clocks or power supplies changed, which could easily affect how a driver works. -Drivers need to be able to handle hardware which has been reset since the +Drivers need to be able to handle hardware which has been reset since all of the suspend methods were called, for example by complete reinitialization. This may be the hardest part, and the one most protected by NDA'd documents and chip errata. It's simplest if the hardware state hasn't changed since -the suspend was carried out, but that can't be guaranteed (in fact, it usually -is not the case). +the suspend was carried out, but that can only be guaranteed if the target +system sleep entered was suspend-to-idle. For the other system sleep states +that may not be the case (and usually isn't for ACPI-defined system sleep +states, like S3). Drivers must also be prepared to notice that the device has been removed while the system was powered down, whenever that's physically possible. @@ -467,197 +472,174 @@ the system log. Entering Hibernation -------------------- -Hibernating the system is more complicated than putting it into the other -sleep states, because it involves creating and saving a system image. -Therefore there are more phases for hibernation, with a different set of -callbacks. These phases always run after tasks have been frozen and memory has -been freed. -The general procedure for hibernation is to quiesce all devices (freeze), create -an image of the system memory while everything is stable, reactivate all -devices (thaw), write the image to permanent storage, and finally shut down the -system (poweroff). The phases used to accomplish this are: +Hibernating the system is more complicated than putting it into sleep states, +because it involves creating and saving a system image. Therefore there are +more phases for hibernation, with a different set of callbacks. These phases +always run after tasks have been frozen and enough memory has been freed. - prepare, freeze, freeze_late, freeze_noirq, thaw_noirq, thaw_early, - thaw, complete, prepare, poweroff, poweroff_late, poweroff_noirq +The general procedure for hibernation is to quiesce all devices ("freeze"), +create an image of the system memory while everything is stable, reactivate all +devices ("thaw"), write the image to permanent storage, and finally shut down +the system ("power off"). The phases used to accomplish this are: ``prepare``, +``freeze``, ``freeze_late``, ``freeze_noirq``, ``thaw_noirq``, ``thaw_early``, +``thaw``, ``complete``, ``prepare``, ``poweroff``, ``poweroff_late``, +``poweroff_noirq``. - 1. The prepare phase is discussed in the "Entering System Suspend" section - above. + 1. The ``prepare`` phase is discussed in the "Entering System Suspend" + section above. - 2. The freeze methods should quiesce the device so that it doesn't generate - IRQs or DMA, and they may need to save the values of device registers. - However the device does not have to be put in a low-power state, and to - save time it's best not to do so. Also, the device should not be - prepared to generate wakeup events. + 2. The ``->freeze`` methods should quiesce the device so that it doesn't + generate IRQs or DMA, and they may need to save the values of device + registers. However the device does not have to be put in a low-power + state, and to save time it's best not to do so. Also, the device should + not be prepared to generate wakeup events. - 3. The freeze_late phase is analogous to the suspend_late phase described - above, except that the device should not be put in a low-power state and - should not be allowed to generate wakeup events by it. + 3. The ``freeze_late`` phase is analogous to the ``suspend_late`` phase + described earlier, except that the device should not be put into a + low-power state and should not be allowed to generate wakeup events. - 4. The freeze_noirq phase is analogous to the suspend_noirq phase discussed - above, except again that the device should not be put in a low-power - state and should not be allowed to generate wakeup events. + 4. The ``freeze_noirq`` phase is analogous to the ``suspend_noirq`` phase + discussed earlier, except again that the device should not be put into + a low-power state and should not be allowed to generate wakeup events. At this point the system image is created. All devices should be inactive and the contents of memory should remain undisturbed while this happens, so that the image forms an atomic snapshot of the system state. - 5. The thaw_noirq phase is analogous to the resume_noirq phase discussed - above. The main difference is that its methods can assume the device is - in the same state as at the end of the freeze_noirq phase. + 5. The ``thaw_noirq`` phase is analogous to the ``resume_noirq`` phase + discussed earlier. The main difference is that its methods can assume + the device is in the same state as at the end of the ``freeze_noirq`` + phase. - 6. The thaw_early phase is analogous to the resume_early phase described - above. Its methods should undo the actions of the preceding - freeze_late, if necessary. + 6. The ``thaw_early`` phase is analogous to the ``resume_early`` phase + described above. Its methods should undo the actions of the preceding + ``freeze_late``, if necessary. - 7. The thaw phase is analogous to the resume phase discussed above. Its - methods should bring the device back to an operating state, so that it - can be used for saving the image if necessary. + 7. The ``thaw`` phase is analogous to the ``resume`` phase discussed + earlier. Its methods should bring the device back to an operating + state, so that it can be used for saving the image if necessary. - 8. The complete phase is discussed in the "Leaving System Suspend" section - above. + 8. The ``complete`` phase is discussed in the "Leaving System Suspend" + section above. At this point the system image is saved, and the devices then need to be prepared for the upcoming system shutdown. This is much like suspending them -before putting the system into the freeze, standby or memory sleep state, +before putting the system into the suspend-to-idle, shallow or deep sleep state, and the phases are similar. - 9. The prepare phase is discussed above. + 9. The ``prepare`` phase is discussed above. - 10. The poweroff phase is analogous to the suspend phase. + 10. The ``poweroff`` phase is analogous to the ``suspend`` phase. - 11. The poweroff_late phase is analogous to the suspend_late phase. + 11. The ``poweroff_late`` phase is analogous to the ``suspend_late`` phase. - 12. The poweroff_noirq phase is analogous to the suspend_noirq phase. + 12. The ``poweroff_noirq`` phase is analogous to the ``suspend_noirq`` phase. -The poweroff, poweroff_late and poweroff_noirq callbacks should do essentially -the same things as the suspend, suspend_late and suspend_noirq callbacks, -respectively. The only notable difference is that they need not store the -device register values, because the registers should already have been stored -during the freeze, freeze_late or freeze_noirq phases. +The ``->poweroff``, ``->poweroff_late`` and ``->poweroff_noirq`` callbacks +should do essentially the same things as the ``->suspend``, ``->suspend_late`` +and ``->suspend_noirq`` callbacks, respectively. The only notable difference is +that they need not store the device register values, because the registers +should already have been stored during the ``freeze``, ``freeze_late`` or +``freeze_noirq`` phases. Leaving Hibernation ------------------- + Resuming from hibernation is, again, more complicated than resuming from a sleep state in which the contents of main memory are preserved, because it requires a system image to be loaded into memory and the pre-hibernation memory contents to be restored before control can be passed back to the image kernel. -Although in principle, the image might be loaded into memory and the +Although in principle the image might be loaded into memory and the pre-hibernation memory contents restored by the boot loader, in practice this can't be done because boot loaders aren't smart enough and there is no established protocol for passing the necessary information. So instead, the -boot loader loads a fresh instance of the kernel, called the boot kernel, into -memory and passes control to it in the usual way. Then the boot kernel reads -the system image, restores the pre-hibernation memory contents, and passes -control to the image kernel. Thus two different kernels are involved in -resuming from hibernation. In fact, the boot kernel may be completely different -from the image kernel: a different configuration and even a different version. -This has important consequences for device drivers and their subsystems. - -To be able to load the system image into memory, the boot kernel needs to +boot loader loads a fresh instance of the kernel, called "the restore kernel", +into memory and passes control to it in the usual way. Then the restore kernel +reads the system image, restores the pre-hibernation memory contents, and passes +control to the image kernel. Thus two different kernel instances are involved +in resuming from hibernation. In fact, the restore kernel may be completely +different from the image kernel: a different configuration and even a different +version. This has important consequences for device drivers and their +subsystems. + +To be able to load the system image into memory, the restore kernel needs to include at least a subset of device drivers allowing it to access the storage medium containing the image, although it doesn't need to include all of the drivers present in the image kernel. After the image has been loaded, the devices managed by the boot kernel need to be prepared for passing control back to the image kernel. This is very similar to the initial steps involved in -creating a system image, and it is accomplished in the same way, using prepare, -freeze, and freeze_noirq phases. However the devices affected by these phases -are only those having drivers in the boot kernel; other devices will still be in -whatever state the boot loader left them. +creating a system image, and it is accomplished in the same way, using +``prepare``, ``freeze``, and ``freeze_noirq`` phases. However, the devices +affected by these phases are only those having drivers in the restore kernel; +other devices will still be in whatever state the boot loader left them. -Should the restoration of the pre-hibernation memory contents fail, the boot +Should the restoration of the pre-hibernation memory contents fail, the restore kernel would go through the "thawing" procedure described above, using the -thaw_noirq, thaw, and complete phases, and then continue running normally. This -happens only rarely. Most often the pre-hibernation memory contents are -restored successfully and control is passed to the image kernel, which then -becomes responsible for bringing the system back to the working state. +``thaw_noirq``, ``thaw_early``, ``thaw``, and ``complete`` phases, and then +continue running normally. This happens only rarely. Most often the +pre-hibernation memory contents are restored successfully and control is passed +to the image kernel, which then becomes responsible for bringing the system back +to the working state. To achieve this, the image kernel must restore the devices' pre-hibernation -functionality. The operation is much like waking up from the memory sleep -state, although it involves different phases: +functionality. The operation is much like waking up from a sleep state (with +the memory contents preserved), although it involves different phases: +``restore_noirq``, ``restore_early``, ``restore``, ``complete``. - restore_noirq, restore_early, restore, complete + 1. The ``restore_noirq`` phase is analogous to the ``resume_noirq`` phase. - 1. The restore_noirq phase is analogous to the resume_noirq phase. + 2. The ``restore_early`` phase is analogous to the ``resume_early`` phase. - 2. The restore_early phase is analogous to the resume_early phase. + 3. The ``restore`` phase is analogous to the ``resume`` phase. - 3. The restore phase is analogous to the resume phase. + 4. The ``complete`` phase is discussed above. - 4. The complete phase is discussed above. +The main difference from ``resume[_early|_noirq]`` is that +``restore[_early|_noirq]`` must assume the device has been accessed and +reconfigured by the boot loader or the restore kernel. Consequently, the state +of the device may be different from the state remembered from the ``freeze``, +``freeze_late`` and ``freeze_noirq`` phases. The device may even need to be +reset and completely re-initialized. In many cases this difference doesn't +matter, so the ``->resume[_early|_noirq]`` and ``->restore[_early|_norq]`` +method pointers can be set to the same routines. Nevertheless, different +callback pointers are used in case there is a situation where it actually does +matter. -The main difference from resume[_early|_noirq] is that restore[_early|_noirq] -must assume the device has been accessed and reconfigured by the boot loader or -the boot kernel. Consequently the state of the device may be different from the -state remembered from the freeze, freeze_late and freeze_noirq phases. The -device may even need to be reset and completely re-initialized. In many cases -this difference doesn't matter, so the resume[_early|_noirq] and -restore[_early|_norq] method pointers can be set to the same routines. -Nevertheless, different callback pointers are used in case there is a situation -where it actually does matter. +Power Management Notifiers +========================== -Device Power Management Domains -------------------------------- -Sometimes devices share reference clocks or other power resources. In those -cases it generally is not possible to put devices into low-power states -individually. Instead, a set of devices sharing a power resource can be put -into a low-power state together at the same time by turning off the shared -power resource. Of course, they also need to be put into the full-power state -together, by turning the shared power resource on. A set of devices with this -property is often referred to as a power domain. A power domain may also be -nested inside another power domain. The nested domain is referred to as the -sub-domain of the parent domain. +There are some operations that cannot be carried out by the power management +callbacks discussed above, because the callbacks occur too late or too early. +To handle these cases, subsystems and device drivers may register power +management notifiers that are called before tasks are frozen and after they have +been thawed. Generally speaking, the PM notifiers are suitable for performing +actions that either require user space to be available, or at least won't +interfere with user space. -Support for power domains is provided through the pm_domain field of struct -device. This field is a pointer to an object of type struct dev_pm_domain, -defined in include/linux/pm.h, providing a set of power management callbacks -analogous to the subsystem-level and device driver callbacks that are executed -for the given device during all power transitions, instead of the respective -subsystem-level callbacks. Specifically, if a device's pm_domain pointer is -not NULL, the ->suspend() callback from the object pointed to by it will be -executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and -analogously for all of the remaining callbacks. In other words, power -management domain callbacks, if defined for the given device, always take -precedence over the callbacks provided by the device's subsystem (e.g. bus -type). +For details refer to :file:`Documentation/power/notifiers.txt`. -The support for device power management domains is only relevant to platforms -needing to use the same device driver power management callbacks in many -different power domain configurations and wanting to avoid incorporating the -support for power domains into subsystem-level callbacks, for example by -modifying the platform bus type. Other platforms need not implement it or take -it into account in any way. -Devices may be defined as IRQ-safe which indicates to the PM core that their -runtime PM callbacks may be invoked with disabled interrupts (see -Documentation/power/runtime_pm.txt for more information). If an IRQ-safe -device belongs to a PM domain, the runtime PM of the domain will be -disallowed, unless the domain itself is defined as IRQ-safe. However, it -makes sense to define a PM domain as IRQ-safe only if all the devices in it -are IRQ-safe. Moreover, if an IRQ-safe domain has a parent domain, the runtime -PM of the parent is only allowed if the parent itself is IRQ-safe too with the -additional restriction that all child domains of an IRQ-safe parent must also -be IRQ-safe. +Device Low-Power (suspend) States +================================= -Device Low Power (suspend) States ---------------------------------- Device low-power states aren't standard. One device might only handle "on" and "off", while another might support a dozen different versions of "on" (how many engines are active?), plus a state that gets back to "on" faster than from a full "off". -Some busses define rules about what different suspend states mean. PCI -gives one example: after the suspend sequence completes, a non-legacy +Some buses define rules about what different suspend states mean. PCI +gives one example: after the suspend sequence completes, a non-legacy PCI device may not perform DMA or issue IRQs, and any wakeup events it issues would be issued through the PME# bus signal. Plus, there are several PCI-standard device states, some of which are optional. In contrast, integrated system-on-chip processors often use IRQs as the -wakeup event sources (so drivers would call enable_irq_wake) and might -be able to treat DMA completion as a wakeup event (sometimes DMA can stay +wakeup event sources (so drivers would call :c:func:`enable_irq_wake`) and +might be able to treat DMA completion as a wakeup event (sometimes DMA can stay active too, it'd only be the CPU and some peripherals that sleep). Some details here may be platform-specific. Systems may have devices that @@ -674,21 +656,54 @@ ways; the aforementioned LCD might be active in one product's "standby", but a different product using the same SOC might work differently. -Power Management Notifiers --------------------------- -There are some operations that cannot be carried out by the power management -callbacks discussed above, because the callbacks occur too late or too early. -To handle these cases, subsystems and device drivers may register power -management notifiers that are called before tasks are frozen and after they have -been thawed. Generally speaking, the PM notifiers are suitable for performing -actions that either require user space to be available, or at least won't -interfere with user space. +Device Power Management Domains +=============================== + +Sometimes devices share reference clocks or other power resources. In those +cases it generally is not possible to put devices into low-power states +individually. Instead, a set of devices sharing a power resource can be put +into a low-power state together at the same time by turning off the shared +power resource. Of course, they also need to be put into the full-power state +together, by turning the shared power resource on. A set of devices with this +property is often referred to as a power domain. A power domain may also be +nested inside another power domain. The nested domain is referred to as the +sub-domain of the parent domain. -For details refer to Documentation/power/notifiers.txt. +Support for power domains is provided through the :c:member:`pm_domain` field of +|struct| :c:type:`device`. This field is a pointer to an object of +type |struct| :c:type:`dev_pm_domain`, defined in :file:`include/linux/pm.h``, +providing a set of power management callbacks analogous to the subsystem-level +and device driver callbacks that are executed for the given device during all +power transitions, instead of the respective subsystem-level callbacks. +Specifically, if a device's :c:member:`pm_domain` pointer is not NULL, the +``->suspend()`` callback from the object pointed to by it will be executed +instead of its subsystem's (e.g. bus type's) ``->suspend()`` callback and +analogously for all of the remaining callbacks. In other words, power +management domain callbacks, if defined for the given device, always take +precedence over the callbacks provided by the device's subsystem (e.g. bus type). + +The support for device power management domains is only relevant to platforms +needing to use the same device driver power management callbacks in many +different power domain configurations and wanting to avoid incorporating the +support for power domains into subsystem-level callbacks, for example by +modifying the platform bus type. Other platforms need not implement it or take +it into account in any way. + +Devices may be defined as IRQ-safe which indicates to the PM core that their +runtime PM callbacks may be invoked with disabled interrupts (see +:file:`Documentation/power/runtime_pm.txt` for more information). If an +IRQ-safe device belongs to a PM domain, the runtime PM of the domain will be +disallowed, unless the domain itself is defined as IRQ-safe. However, it +makes sense to define a PM domain as IRQ-safe only if all the devices in it +are IRQ-safe. Moreover, if an IRQ-safe domain has a parent domain, the runtime +PM of the parent is only allowed if the parent itself is IRQ-safe too with the +additional restriction that all child domains of an IRQ-safe parent must also +be IRQ-safe. Runtime Power Management ======================== + Many devices are able to dynamically power down while the system is still running. This feature is useful for devices that are not being used, and can offer significant power savings on a running system. These devices @@ -711,6 +726,7 @@ disabled. This all depends on the hardware and the design of the subsystem and device driver in question. During system-wide resume from a sleep state it's easiest to put devices into -the full-power state, as explained in Documentation/power/runtime_pm.txt. Refer -to that document for more information regarding this particular issue as well as -for information on the device runtime power management framework in general. +the full-power state, as explained in :file:`Documentation/power/runtime_pm.txt`. +Refer to that document for more information regarding this particular issue as +well as for information on the device runtime power management framework in +general. diff --git a/Documentation/driver-api/pm/index.rst b/Documentation/driver-api/pm/index.rst new file mode 100644 index 000000000000..f7b3ce9e9ba0 --- /dev/null +++ b/Documentation/driver-api/pm/index.rst @@ -0,0 +1,15 @@ +======================= +Device Power Management +======================= + +.. toctree:: + + devices + types + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/driver-api/pm/types.rst b/Documentation/driver-api/pm/types.rst new file mode 100644 index 000000000000..3ebdecc54104 --- /dev/null +++ b/Documentation/driver-api/pm/types.rst @@ -0,0 +1,5 @@ +================================== +Device Power Management Data Types +================================== + +.. kernel-doc:: include/linux/pm.h diff --git a/include/linux/pm.h b/include/linux/pm.h index 10867b11d503..a0894bc52bb4 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -276,9 +276,6 @@ typedef struct pm_message { * example, if it detects that a child was unplugged while the system was * asleep). * - * Refer to Documentation/power/devices.txt for more information about the role - * of the above callbacks in the system suspend process. - * * There also are callbacks related to runtime power management of devices. * Again, as a rule these callbacks are executed by the PM core for subsystems * (PM domains, device types, classes and bus types) and the subsystem-level -- 2.20.1