From 271f29e7b55278bc2e4bab53448eef9b35778664 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 9 Jul 2010 10:37:42 +1000 Subject: [PATCH] drm/nv50: move dp_set_tmds() function to happen in the last display irq It seems on some chipsets that doing this from the 0x20 handler causes the display engine to not ever signal the final 0x40 stage. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 65 +++++++++++++------------- 1 file changed, 33 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index ec1ccf680ddf..c19ed8c8e3b5 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -788,37 +788,6 @@ nv50_display_unk20_dp_hack(struct drm_device *dev, struct dcb_entry *dcb) } } -/* If programming a TMDS output on a SOR that can also be configured for - * DisplayPort, make sure NV50_SOR_DP_CTRL_ENABLE is forced off. - * - * It looks like the VBIOS TMDS scripts make an attempt at this, however, - * the VBIOS scripts on at least one board I have only switch it off on - * link 0, causing a blank display if the output has previously been - * programmed for DisplayPort. - */ -static void -nv50_display_unk20_dp_set_tmds(struct drm_device *dev, struct dcb_entry *dcb) -{ - int or = ffs(dcb->or) - 1, link = !(dcb->dpconf.sor.link & 1); - struct drm_encoder *encoder; - u32 tmp; - - if (dcb->type != OUTPUT_TMDS) - return; - - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); - - if (nv_encoder->dcb->type == OUTPUT_DP && - nv_encoder->dcb->or & (1 << or)) { - tmp = nv_rd32(dev, NV50_SOR_DP_CTRL(or, link)); - tmp &= ~NV50_SOR_DP_CTRL_ENABLED; - nv_wr32(dev, NV50_SOR_DP_CTRL(or, link), tmp); - break; - } - } -} - static void nv50_display_unk20_handler(struct drm_device *dev) { @@ -917,7 +886,6 @@ nv50_display_unk20_handler(struct drm_device *dev) nouveau_bios_run_display_table(dev, dcb, script, pclk); nv50_display_unk20_dp_hack(dev, dcb); - nv50_display_unk20_dp_set_tmds(dev, dcb); if (dcb->type != OUTPUT_ANALOG) { tmp = nv_rd32(dev, NV50_PDISPLAY_SOR_CLK_CTRL2(or)); @@ -938,6 +906,37 @@ ack: nv_wr32(dev, 0x610030, 0x80000000); } +/* If programming a TMDS output on a SOR that can also be configured for + * DisplayPort, make sure NV50_SOR_DP_CTRL_ENABLE is forced off. + * + * It looks like the VBIOS TMDS scripts make an attempt at this, however, + * the VBIOS scripts on at least one board I have only switch it off on + * link 0, causing a blank display if the output has previously been + * programmed for DisplayPort. + */ +static void +nv50_display_unk40_dp_set_tmds(struct drm_device *dev, struct dcb_entry *dcb) +{ + int or = ffs(dcb->or) - 1, link = !(dcb->dpconf.sor.link & 1); + struct drm_encoder *encoder; + u32 tmp; + + if (dcb->type != OUTPUT_TMDS) + return; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); + + if (nv_encoder->dcb->type == OUTPUT_DP && + nv_encoder->dcb->or & (1 << or)) { + tmp = nv_rd32(dev, NV50_SOR_DP_CTRL(or, link)); + tmp &= ~NV50_SOR_DP_CTRL_ENABLED; + nv_wr32(dev, NV50_SOR_DP_CTRL(or, link), tmp); + break; + } + } +} + static void nv50_display_unk40_handler(struct drm_device *dev) { @@ -952,6 +951,8 @@ nv50_display_unk40_handler(struct drm_device *dev) goto ack; nouveau_bios_run_display_table(dev, dcb, script, -pclk); + nv50_display_unk40_dp_set_tmds(dev, dcb); + ack: nv_wr32(dev, NV50_PDISPLAY_INTR_1, NV50_PDISPLAY_INTR_1_CLK_UNK40); nv_wr32(dev, 0x610030, 0x80000000); -- 2.20.1