From 247ec9b418ba50c9022280035330059364d54540 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 4 Feb 2011 17:09:50 -0500 Subject: [PATCH] cifs: don't send an echo request unless NegProt has been done When the socket to the server is disconnected, the client more or less immediately calls cifs_reconnect to reconnect the socket. The NegProt and SessSetup however are not done until an actual call needs to be made. With the addition of the SMB echo code, it's possible that the server will initiate a disconnect on an idle socket. The client will then reconnect the socket but no NegotiateProtocol request is done. The SMBEcho workqueue job will then eventually pop, and an SMBEcho will be sent on the socket. The server will then reject it since no NegProt was done. The ideal fix would be to either have the socket not be reconnected until we plan to use it, or to immediately do a NegProt when the reconnect occurs. The code is not structured for this however. For now we must just settle for not sending any echoes until the NegProt is done. Reported-by: JG Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 1f32a2893b5f..257b6d895e20 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -337,8 +337,12 @@ cifs_echo_request(struct work_struct *work) struct TCP_Server_Info *server = container_of(work, struct TCP_Server_Info, echo.work); - /* no need to ping if we got a response recently */ - if (time_before(jiffies, server->lstrp + SMB_ECHO_INTERVAL - HZ)) + /* + * We cannot send an echo until the NEGOTIATE_PROTOCOL request is done. + * Also, no need to ping if we got a response recently + */ + if (server->tcpStatus != CifsGood || + time_before(jiffies, server->lstrp + SMB_ECHO_INTERVAL - HZ)) goto requeue_echo; rc = CIFSSMBEcho(server); -- 2.20.1