From 243abbf2a610d801904bf1e44917e9ac4ccf823e Mon Sep 17 00:00:00 2001 From: "holt@sgi.com" Date: Tue, 16 Aug 2011 17:32:21 +0000 Subject: [PATCH] flexcan: Fix up fsl-flexcan device tree binding. This patch cleans up the documentation of the device-tree binding for the Flexcan devices on Freescale's PowerPC and ARM cores. Extra properties are not used by the driver so we are removing them. Signed-off-by: Robin Holt Acked-by: Marc Kleine-Budde , Acked-by: Wolfgang Grandegger , Cc: U Bhaskar-B22300 Cc: Scott Wood Cc: Grant Likely Cc: Kumar Gala Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller --- .../bindings/net/can/fsl-flexcan.txt | 61 ++++--------------- arch/powerpc/boot/dts/p1010rdb.dts | 10 +-- arch/powerpc/boot/dts/p1010si.dtsi | 10 ++- 3 files changed, 17 insertions(+), 64 deletions(-) diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 1a729f089866..8dfb98b6e3e2 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -1,61 +1,22 @@ -CAN Device Tree Bindings ------------------------- -2011 Freescale Semiconductor, Inc. +Flexcan CAN contoller on Freescale's ARM and PowerPC system-on-a-chip (SOC). -fsl,flexcan-v1.0 nodes ------------------------ -In addition to the required compatible-, reg- and interrupt-properties, you can -also specify which clock source shall be used for the controller. +Required properties: -CPI Clock- Can Protocol Interface Clock - This CLK_SRC bit of CTRL(control register) selects the clock source to - the CAN Protocol Interface(CPI) to be either the peripheral clock - (driven by the PLL) or the crystal oscillator clock. The selected clock - is the one fed to the prescaler to generate the Serial Clock (Sclock). - The PRESDIV field of CTRL(control register) controls a prescaler that - generates the Serial Clock (Sclock), whose period defines the - time quantum used to compose the CAN waveform. +- compatible : Should be "fsl,-flexcan" -Can Engine Clock Source - There are two sources for CAN clock - - Platform Clock It represents the bus clock - - Oscillator Clock + An implementation should also claim any of the following compatibles + that it is fully backwards compatible with: - Peripheral Clock (PLL) - -------------- - | - --------- ------------- - | |CPI Clock | Prescaler | Sclock - | |---------------->| (1.. 256) |------------> - --------- ------------- - | | - -------------- ---------------------CLK_SRC - Oscillator Clock + - fsl,p1010-flexcan -- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects - the peripheral clock. PLL clock is fed to the - prescaler to generate the Serial Clock (Sclock). - Valid values are "oscillator" and "platform" - "oscillator": CAN engine clock source is oscillator clock. - "platform" The CAN engine clock source is the bus clock - (platform clock). +- reg : Offset and length of the register set for this device +- interrupts : Interrupt tuple for this device -- fsl,flexcan-clock-divider : for the reference and system clock, an additional - clock divider can be specified. -- clock-frequency: frequency required to calculate the bitrate for FlexCAN. +Example: -Note: - - v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC. - - P1010 does not have oscillator as the Clock Source.So the default - Clock Source is platform clock. -Examples: - - can0@1c000 { - compatible = "fsl,flexcan-v1.0"; + can@1c000 { + compatible = "fsl,p1010-flexcan"; reg = <0x1c000 0x1000>; interrupts = <48 0x2>; interrupt-parent = <&mpic>; - fsl,flexcan-clock-source = "platform"; - fsl,flexcan-clock-divider = <2>; - clock-frequency = ; }; diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts index 6b33b73a5ba0..d6c669c888e9 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dts +++ b/arch/powerpc/boot/dts/p1010rdb.dts @@ -23,6 +23,8 @@ ethernet2 = &enet2; pci0 = &pci0; pci1 = &pci1; + can0 = &can0; + can1 = &can1; }; memory { @@ -169,14 +171,6 @@ }; }; - can0@1c000 { - fsl,flexcan-clock-source = "platform"; - }; - - can1@1d000 { - fsl,flexcan-clock-source = "platform"; - }; - usb@22000 { phy_type = "utmi"; }; diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi index 7f51104f2e36..cabe0a453ae6 100644 --- a/arch/powerpc/boot/dts/p1010si.dtsi +++ b/arch/powerpc/boot/dts/p1010si.dtsi @@ -140,20 +140,18 @@ interrupt-parent = <&mpic>; }; - can0@1c000 { - compatible = "fsl,flexcan-v1.0"; + can0: can@1c000 { + compatible = "fsl,p1010-flexcan"; reg = <0x1c000 0x1000>; interrupts = <48 0x2>; interrupt-parent = <&mpic>; - fsl,flexcan-clock-divider = <2>; }; - can1@1d000 { - compatible = "fsl,flexcan-v1.0"; + can1: can@1d000 { + compatible = "fsl,p1010-flexcan"; reg = <0x1d000 0x1000>; interrupts = <61 0x2>; interrupt-parent = <&mpic>; - fsl,flexcan-clock-divider = <2>; }; L2: l2-cache-controller@20000 { -- 2.20.1