From 24333ac26d01aab4cee8e1c137c34b97ab294b19 Mon Sep 17 00:00:00 2001 From: Jeroen De Wachter Date: Mon, 9 Jan 2017 18:55:00 +0100 Subject: [PATCH] hwmon: (tmp401) use smb word operations instead of 2 smb byte operations tmp401 separately read/wrote high and low bytes of temperature values while the hardware supports reading/writing those values in one operation. Driver has been modified to use word operations where possible. Tested with a tmp432 sensor on a mips64 platform. Signed-off-by: Jeroen De Wachter Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp401.c | 49 ++++++++++++------------------------------ 1 file changed, 14 insertions(+), 35 deletions(-) diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index 6276003fdcb3..1f2d13dc9439 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -82,16 +82,6 @@ static const u8 TMP401_TEMP_MSB_WRITE[7][2] = { { 0, 0x11 }, /* offset */ }; -static const u8 TMP401_TEMP_LSB[7][2] = { - { 0x15, 0x10 }, /* temp */ - { 0x17, 0x14 }, /* low limit */ - { 0x16, 0x13 }, /* high limit */ - { 0, 0 }, /* therm (crit) limit (unused) */ - { 0x31, 0x35 }, /* lowest */ - { 0x33, 0x37 }, /* highest */ - { 0, 0x12 }, /* offset */ -}; - static const u8 TMP432_TEMP_MSB_READ[4][3] = { { 0x00, 0x01, 0x23 }, /* temp */ { 0x06, 0x08, 0x16 }, /* low limit */ @@ -106,12 +96,6 @@ static const u8 TMP432_TEMP_MSB_WRITE[4][3] = { { 0x20, 0x19, 0x1A }, /* therm (crit) limit */ }; -static const u8 TMP432_TEMP_LSB[3][3] = { - { 0x29, 0x10, 0x24 }, /* temp */ - { 0x3E, 0x14, 0x18 }, /* low limit */ - { 0x3D, 0x13, 0x17 }, /* high limit */ -}; - /* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */ static const u8 TMP432_STATUS_REG[] = { 0x1b, 0x36, 0x35, 0x37 }; @@ -213,25 +197,20 @@ static int tmp401_update_device_reg16(struct i2c_client *client, for (i = 0; i < num_sensors; i++) { /* local / r1 / r2 */ for (j = 0; j < num_regs; j++) { /* temp / low / ... */ u8 regaddr; - /* - * High byte must be read first immediately followed - * by the low byte - */ + regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_READ[j][i] : TMP401_TEMP_MSB_READ[j][i]; - val = i2c_smbus_read_byte_data(client, regaddr); - if (val < 0) - return val; - data->temp[j][i] = val << 8; - if (j == 3) /* crit is msb only */ - continue; - regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i] - : TMP401_TEMP_LSB[j][i]; - val = i2c_smbus_read_byte_data(client, regaddr); + if (j == 3) { /* crit is msb only */ + val = i2c_smbus_read_byte_data(client, regaddr); + } else { + val = i2c_smbus_read_word_swapped(client, + regaddr); + } if (val < 0) return val; - data->temp[j][i] |= val; + + data->temp[j][i] = j == 3 ? val << 8 : val; } } return 0; @@ -373,11 +352,11 @@ static ssize_t store_temp(struct device *dev, struct device_attribute *devattr, regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index] : TMP401_TEMP_MSB_WRITE[nr][index]; - i2c_smbus_write_byte_data(client, regaddr, reg >> 8); - if (nr != 3) { - regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index] - : TMP401_TEMP_LSB[nr][index]; - i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF); + if (nr == 3) { /* crit is msb only */ + i2c_smbus_write_byte_data(client, regaddr, reg >> 8); + } else { + /* Hardware expects big endian data --> use _swapped */ + i2c_smbus_write_word_swapped(client, regaddr, reg); } data->temp[nr][index] = reg; -- 2.20.1