From 232f650253a04b52def9974f47c15f086f7772a5 Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Fri, 27 Mar 2009 11:31:27 -0400 Subject: [PATCH] Staging: comedi: remove C99 comments in s526.c Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/s526.c | 272 +++++++++++++------------- 1 file changed, 136 insertions(+), 136 deletions(-) diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c index a7b6f711afca..e419a7c6943d 100644 --- a/drivers/staging/comedi/drivers/s526.c +++ b/drivers/staging/comedi/drivers/s526.c @@ -277,8 +277,8 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it) struct comedi_subdevice *s; int iobase; int i, n; -// short value; -// int subdev_channel = 0; +/* short value; */ +/* int subdev_channel = 0; */ printk("comedi%d: s526: ", dev->minor); @@ -334,12 +334,12 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it) /* Command are not implemented yet, however they are necessary to allocate the necessary memory for the comedi_async struct (used to trigger the GPCT in case of pulsegenerator function */ - //s->do_cmd = s526_gpct_cmd; - //s->do_cmdtest = s526_gpct_cmdtest; - //s->cancel = s526_gpct_cancel; + /* s->do_cmd = s526_gpct_cmd; */ + /* s->do_cmdtest = s526_gpct_cmdtest; */ + /* s->cancel = s526_gpct_cancel; */ s = dev->subdevices + 1; - //dev->read_subdev=s; + /* dev->read_subdev=s; */ /* analog input subdevice */ s->type = COMEDI_SUBD_AI; /* we support differential */ @@ -383,18 +383,18 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it) return 1; #if 0 - // Example of Counter Application - //One-shot (software trigger) - cmReg.reg.coutSource = 0; // out RCAP - cmReg.reg.coutPolarity = 1; // Polarity inverted - cmReg.reg.autoLoadResetRcap = 1; // Auto load 0:disabled, 1:enabled - cmReg.reg.hwCtEnableSource = 3; // NOT RCAP - cmReg.reg.ctEnableCtrl = 2; // Hardware - cmReg.reg.clockSource = 2; // Internal - cmReg.reg.countDir = 1; // Down - cmReg.reg.countDirCtrl = 1; // Software - cmReg.reg.outputRegLatchCtrl = 0; // latch on read - cmReg.reg.preloadRegSel = 0; // PR0 + /* Example of Counter Application */ + /* One-shot (software trigger) */ + cmReg.reg.coutSource = 0; /* out RCAP */ + cmReg.reg.coutPolarity = 1; /* Polarity inverted */ + cmReg.reg.autoLoadResetRcap = 1; /* Auto load 0:disabled, 1:enabled */ + cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */ + cmReg.reg.ctEnableCtrl = 2; /* Hardware */ + cmReg.reg.clockSource = 2; /* Internal */ + cmReg.reg.countDir = 1; /* Down */ + cmReg.reg.countDirCtrl = 1; /* Software */ + cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */ + cmReg.reg.preloadRegSel = 0; /* PR0 */ cmReg.reg.reserved = 0; outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); @@ -402,24 +402,24 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it) outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel)); outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset the counter - outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Load the counter from PR0 + outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */ - outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset RCAP (fires one-shot) + outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset RCAP (fires one-shot) */ #else - // Set Counter Mode Register - cmReg.reg.coutSource = 0; // out RCAP - cmReg.reg.coutPolarity = 0; // Polarity inverted - cmReg.reg.autoLoadResetRcap = 0; // Auto load disabled - cmReg.reg.hwCtEnableSource = 2; // NOT RCAP - cmReg.reg.ctEnableCtrl = 1; // 1: Software, >1 : Hardware - cmReg.reg.clockSource = 3; // x4 - cmReg.reg.countDir = 0; // up - cmReg.reg.countDirCtrl = 0; // quadrature - cmReg.reg.outputRegLatchCtrl = 0; // latch on read - cmReg.reg.preloadRegSel = 0; // PR0 + /* Set Counter Mode Register */ + cmReg.reg.coutSource = 0; /* out RCAP */ + cmReg.reg.coutPolarity = 0; /* Polarity inverted */ + cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */ + cmReg.reg.hwCtEnableSource = 2; /* NOT RCAP */ + cmReg.reg.ctEnableCtrl = 1; /* 1: Software, >1 : Hardware */ + cmReg.reg.clockSource = 3; /* x4 */ + cmReg.reg.countDir = 0; /* up */ + cmReg.reg.countDirCtrl = 0; /* quadrature */ + cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */ + cmReg.reg.preloadRegSel = 0; /* PR0 */ cmReg.reg.reserved = 0; n = 0; @@ -429,21 +429,21 @@ static int s526_attach(struct comedi_device * dev, struct comedi_devconfig * it) udelay(1000); printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n))); - // Load the pre-laod register high word -// value = (short) (0x55); -// outw(value, ADDR_CHAN_REG(REG_C0H, n)); + /* Load the pre-laod register high word */ +/* value = (short) (0x55); */ +/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */ - // Load the pre-laod register low word -// value = (short)(0xaa55); -// outw(value, ADDR_CHAN_REG(REG_C0L, n)); + /* Load the pre-laod register low word */ +/* value = (short)(0xaa55); */ +/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */ - // Write the Counter Control Register -// outw(value, ADDR_CHAN_REG(REG_C0C, 0)); + /* Write the Counter Control Register */ +/* outw(value, ADDR_CHAN_REG(REG_C0C, 0)); */ - // Reset the counter if it is software preload + /* Reset the counter if it is software preload */ if (cmReg.reg.autoLoadResetRcap == 0) { - outw(0x8000, ADDR_CHAN_REG(REG_C0C, n)); // Reset the counter - outw(0x4000, ADDR_CHAN_REG(REG_C0C, n)); // Load the counter from PR0 + outw(0x8000, ADDR_CHAN_REG(REG_C0C, n)); /* Reset the counter */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, n)); /* Load the counter from PR0 */ } outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); @@ -481,23 +481,23 @@ static int s526_detach(struct comedi_device * dev) static int s526_gpct_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data) { - int i; // counts the Data + int i; /* counts the Data */ int counter_channel = CR_CHAN(insn->chanspec); unsigned short datalow; unsigned short datahigh; - // Check if (n > 0) + /* Check if (n > 0) */ if (insn->n <= 0) { printk("s526: INSN_READ: n should be > 0\n"); return -EINVAL; } - // Read the low word first + /* Read the low word first */ for (i = 0; i < insn->n; i++) { datalow = inw(ADDR_CHAN_REG(REG_C0L, counter_channel)); datahigh = inw(ADDR_CHAN_REG(REG_C0H, counter_channel)); data[i] = (int)(datahigh & 0x00FF); data[i] = (data[i] << 16) | (datalow & 0xFFFF); -// printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n", counter_channel, data[i], datahigh, datalow); +/* printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n", counter_channel, data[i], datahigh, datalow); */ } return i; } @@ -505,20 +505,20 @@ static int s526_gpct_rinsn(struct comedi_device * dev, struct comedi_subdevice * static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data) { - int subdev_channel = CR_CHAN(insn->chanspec); // Unpack chanspec + int subdev_channel = CR_CHAN(insn->chanspec); /* Unpack chanspec */ int i; short value; -// printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel); +/* printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel); */ for (i = 0; i < MAX_GPCT_CONFIG_DATA; i++) { devpriv->s526_gpct_config[subdev_channel].data[i] = insn->data[i]; -// printk("data[%d]=%x\n", i, insn->data[i]); +/* printk("data[%d]=%x\n", i, insn->data[i]); */ } - // Check what type of Counter the user requested, data[0] contains - // the Application type + /* Check what type of Counter the user requested, data[0] contains */ + /* the Application type */ switch (insn->data[0]) { case INSN_CONFIG_GPCT_QUADRATURE_ENCODER: /* @@ -531,19 +531,19 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde devpriv->s526_gpct_config[subdev_channel].app = PositionMeasurement; -/* - // Example of Counter Application - //One-shot (software trigger) - cmReg.reg.coutSource = 0; // out RCAP - cmReg.reg.coutPolarity = 1; // Polarity inverted - cmReg.reg.autoLoadResetRcap = 0; // Auto load disabled - cmReg.reg.hwCtEnableSource = 3; // NOT RCAP - cmReg.reg.ctEnableCtrl = 2; // Hardware - cmReg.reg.clockSource = 2; // Internal - cmReg.reg.countDir = 1; // Down - cmReg.reg.countDirCtrl = 1; // Software - cmReg.reg.outputRegLatchCtrl = 0; // latch on read - cmReg.reg.preloadRegSel = 0; // PR0 +#if 0 + /* Example of Counter Application */ + /* One-shot (software trigger) */ + cmReg.reg.coutSource = 0; /* out RCAP */ + cmReg.reg.coutPolarity = 1; /* Polarity inverted */ + cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */ + cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */ + cmReg.reg.ctEnableCtrl = 2; /* Hardware */ + cmReg.reg.clockSource = 2; /* Internal */ + cmReg.reg.countDir = 1; /* Down */ + cmReg.reg.countDirCtrl = 1; /* Software */ + cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */ + cmReg.reg.preloadRegSel = 0; /* PR0 */ cmReg.reg.reserved = 0; outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); @@ -551,40 +551,40 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel)); outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset the counter - outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Load the counter from PR0 + outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */ - outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset RCAP (fires one-shot) + outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset RCAP (fires one-shot) */ -*/ +#endif #if 1 - // Set Counter Mode Register - cmReg.reg.coutSource = 0; // out RCAP - cmReg.reg.coutPolarity = 0; // Polarity inverted - cmReg.reg.autoLoadResetRcap = 0; // Auto load disabled - cmReg.reg.hwCtEnableSource = 2; // NOT RCAP - cmReg.reg.ctEnableCtrl = 1; // 1: Software, >1 : Hardware - cmReg.reg.clockSource = 3; // x4 - cmReg.reg.countDir = 0; // up - cmReg.reg.countDirCtrl = 0; // quadrature - cmReg.reg.outputRegLatchCtrl = 0; // latch on read - cmReg.reg.preloadRegSel = 0; // PR0 + /* Set Counter Mode Register */ + cmReg.reg.coutSource = 0; /* out RCAP */ + cmReg.reg.coutPolarity = 0; /* Polarity inverted */ + cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */ + cmReg.reg.hwCtEnableSource = 2; /* NOT RCAP */ + cmReg.reg.ctEnableCtrl = 1; /* 1: Software, >1 : Hardware */ + cmReg.reg.clockSource = 3; /* x4 */ + cmReg.reg.countDir = 0; /* up */ + cmReg.reg.countDirCtrl = 0; /* quadrature */ + cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */ + cmReg.reg.preloadRegSel = 0; /* PR0 */ cmReg.reg.reserved = 0; - // Set Counter Mode Register -// printk("s526: Counter Mode register=%x\n", cmReg.value); + /* Set Counter Mode Register */ +/* printk("s526: Counter Mode register=%x\n", cmReg.value); */ outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); - // Reset the counter if it is software preload + /* Reset the counter if it is software preload */ if (cmReg.reg.autoLoadResetRcap == 0) { - outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset the counter -// outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Load the counter from PR0 + outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */ +/* outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); Load the counter from PR0 */ } #else - cmReg.reg.countDirCtrl = 0; // 0 quadrature, 1 software control + cmReg.reg.countDirCtrl = 0; /* 0 quadrature, 1 software control */ - // data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4 + /* data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4 */ if (insn->data[1] == GPCT_X2) { cmReg.reg.clockSource = 1; } else if (insn->data[1] == GPCT_X4) { @@ -593,37 +593,37 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde cmReg.reg.clockSource = 0; } - // When to take into account the indexpulse: + /* When to take into account the indexpulse: */ if (insn->data[2] == GPCT_IndexPhaseLowLow) { } else if (insn->data[2] == GPCT_IndexPhaseLowHigh) { } else if (insn->data[2] == GPCT_IndexPhaseHighLow) { } else if (insn->data[2] == GPCT_IndexPhaseHighHigh) { } - // Take into account the index pulse? + /* Take into account the index pulse? */ if (insn->data[3] == GPCT_RESET_COUNTER_ON_INDEX) - cmReg.reg.autoLoadResetRcap = 4; // Auto load with INDEX^ + cmReg.reg.autoLoadResetRcap = 4; /* Auto load with INDEX^ */ - // Set Counter Mode Register + /* Set Counter Mode Register */ cmReg.value = (short) (insn->data[1] & 0xFFFF); outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); - // Load the pre-laod register high word + /* Load the pre-laod register high word */ value = (short) ((insn->data[2] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); - // Load the pre-laod register low word + /* Load the pre-laod register low word */ value = (short) (insn->data[2] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - // Write the Counter Control Register + /* Write the Counter Control Register */ if (insn->data[3] != 0) { value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel)); } - // Reset the counter if it is software preload + /* Reset the counter if it is software preload */ if (cmReg.reg.autoLoadResetRcap == 0) { - outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset the counter - outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Load the counter from PR0 + outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */ } #endif break; @@ -640,33 +640,33 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde devpriv->s526_gpct_config[subdev_channel].app = SinglePulseGeneration; - // Set Counter Mode Register + /* Set Counter Mode Register */ cmReg.value = (short) (insn->data[1] & 0xFFFF); - cmReg.reg.preloadRegSel = 0; // PR0 + cmReg.reg.preloadRegSel = 0; /* PR0 */ outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); - // Load the pre-laod register 0 high word + /* Load the pre-laod register 0 high word */ value = (short) ((insn->data[2] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); - // Load the pre-laod register 0 low word + /* Load the pre-laod register 0 low word */ value = (short) (insn->data[2] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - // Set Counter Mode Register + /* Set Counter Mode Register */ cmReg.value = (short) (insn->data[1] & 0xFFFF); - cmReg.reg.preloadRegSel = 1; // PR1 + cmReg.reg.preloadRegSel = 1; /* PR1 */ outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); - // Load the pre-laod register 1 high word + /* Load the pre-laod register 1 high word */ value = (short) ((insn->data[3] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); - // Load the pre-laod register 1 low word + /* Load the pre-laod register 1 low word */ value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - // Write the Counter Control Register + /* Write the Counter Control Register */ if (insn->data[3] != 0) { value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel)); @@ -685,33 +685,33 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde devpriv->s526_gpct_config[subdev_channel].app = PulseTrainGeneration; - // Set Counter Mode Register + /* Set Counter Mode Register */ cmReg.value = (short) (insn->data[1] & 0xFFFF); - cmReg.reg.preloadRegSel = 0; // PR0 + cmReg.reg.preloadRegSel = 0; /* PR0 */ outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); - // Load the pre-laod register 0 high word + /* Load the pre-laod register 0 high word */ value = (short) ((insn->data[2] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); - // Load the pre-laod register 0 low word + /* Load the pre-laod register 0 low word */ value = (short) (insn->data[2] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - // Set Counter Mode Register + /* Set Counter Mode Register */ cmReg.value = (short) (insn->data[1] & 0xFFFF); - cmReg.reg.preloadRegSel = 1; // PR1 + cmReg.reg.preloadRegSel = 1; /* PR1 */ outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel)); - // Load the pre-laod register 1 high word + /* Load the pre-laod register 1 high word */ value = (short) ((insn->data[3] >> 16) & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel)); - // Load the pre-laod register 1 low word + /* Load the pre-laod register 1 low word */ value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - // Write the Counter Control Register + /* Write the Counter Control Register */ if (insn->data[3] != 0) { value = (short) (insn->data[3] & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel)); @@ -730,13 +730,13 @@ static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subde static int s526_gpct_winsn(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data) { - int subdev_channel = CR_CHAN(insn->chanspec); // Unpack chanspec + int subdev_channel = CR_CHAN(insn->chanspec); /* Unpack chanspec */ short value; printk("s526: GPCT_INSN_WRITE on channel %d\n", subdev_channel); cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel)); printk("s526: Counter Mode Register: %x\n", cmReg.value); - // Check what Application of Counter this channel is configured for + /* Check what Application of Counter this channel is configured for */ switch (devpriv->s526_gpct_config[subdev_channel].app) { case PositionMeasurement: printk("S526: INSN_WRITE: PM\n"); @@ -776,12 +776,12 @@ static int s526_gpct_winsn(struct comedi_device * dev, struct comedi_subdevice * value = (short) (*data & 0xFFFF); outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel)); break; - default: // Impossible + default: /* Impossible */ printk("s526: INSN_WRITE: Functionality %d not implemented yet\n", devpriv->s526_gpct_config[subdev_channel].app); return -EINVAL; break; } - // return the number of samples written + /* return the number of samples written */ return insn->n; } @@ -803,14 +803,14 @@ static int s526_ai_insn_config(struct comedi_device * dev, struct comedi_subdevi * enable channels here. The channel should be enabled in the * INSN_READ handler. */ - // Enable ADC interrupt + /* Enable ADC interrupt */ outw(ISR_ADC_DONE, ADDR_REG(REG_IER)); -// printk("s526: ADC current value: 0x%04x\n", inw(ADDR_REG(REG_ADC))); +/* printk("s526: ADC current value: 0x%04x\n", inw(ADDR_REG(REG_ADC))); */ devpriv->s526_ai_config = (data[0] & 0x3FF) << 5; if (data[1] > 0) - devpriv->s526_ai_config |= 0x8000; //set the delay + devpriv->s526_ai_config |= 0x8000; /* set the delay */ - devpriv->s526_ai_config |= 0x0001; // ADC start bit. + devpriv->s526_ai_config |= 0x0001; /* ADC start bit. */ return result; } @@ -837,8 +837,8 @@ static int s526_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s for (n = 0; n < insn->n; n++) { /* trigger conversion */ outw(value, ADDR_REG(REG_ADC)); -// printk("s526: Wrote 0x%04x to ADC\n", value); -// printk("s526: ADC reg=0x%04x\n", inw(ADDR_REG(REG_ADC))); +/* printk("s526: Wrote 0x%04x to ADC\n", value); */ +/* printk("s526: ADC reg=0x%04x\n", inw(ADDR_REG(REG_ADC))); */ #define TIMEOUT 100 /* wait for conversion to end */ @@ -859,7 +859,7 @@ static int s526_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s /* read data */ d = inw(ADDR_REG(REG_ADD)); -// printk("AI[%d]=0x%04x\n", n, (unsigned short)(d & 0xFFFF)); +/* printk("AI[%d]=0x%04x\n", n, (unsigned short)(d & 0xFFFF)); */ /* munge data */ data[n] = d ^ 0x8000; @@ -876,20 +876,20 @@ static int s526_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s int chan = CR_CHAN(insn->chanspec); unsigned short val; -// printk("s526_ao_winsn\n"); +/* printk("s526_ao_winsn\n"); */ val = chan << 1; -// outw(val, dev->iobase + REG_DAC); +/* outw(val, dev->iobase + REG_DAC); */ outw(val, ADDR_REG(REG_DAC)); /* Writing a list of values to an AO channel is probably not * very useful, but that's how the interface is defined. */ for (i = 0; i < insn->n; i++) { /* a typical programming sequence */ -// outw(data[i], dev->iobase + REG_ADD); // write the data to preload register - outw(data[i], ADDR_REG(REG_ADD)); // write the data to preload register +/* outw(data[i], dev->iobase + REG_ADD); write the data to preload register */ + outw(data[i], ADDR_REG(REG_ADD)); /* write the data to preload register */ devpriv->ao_readback[chan] = data[i]; -// outw(val + 1, dev->iobase + REG_DAC); // starts the D/A conversion. - outw(val + 1, ADDR_REG(REG_DAC)); // starts the D/A conversion. +/* outw(val + 1, dev->iobase + REG_DAC); starts the D/A conversion. */ + outw(val + 1, ADDR_REG(REG_DAC)); /* starts the D/A conversion. */ } /* return the number of samples read/written */ @@ -932,10 +932,10 @@ static int s526_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevic /* on return, data[1] contains the value of the digital * input and output lines. */ - data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; // low 8 bits are the data + data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; /* low 8 bits are the data */ /* or we could just return the software copy of the output values if * it was a purely digital output subdevice */ - //data[1]=s->state; + /* data[1]=s->state; */ return 2; } @@ -959,10 +959,10 @@ static int s526_dio_insn_config(struct comedi_device * dev, struct comedi_subdev * value COMEDI_INPUT or COMEDI_OUTPUT. */ if (data[0] == COMEDI_OUTPUT) { - value |= 1 << (chan + 10); // bit 10/11 set the group 1/2's mode + value |= 1 << (chan + 10); /* bit 10/11 set the group 1/2's mode */ s->io_bits |= (0xF << chan); } else { - value &= ~(1 << (chan + 10)); // 1 is output, 0 is input. + value &= ~(1 << (chan + 10)); /* 1 is output, 0 is input. */ s->io_bits &= ~(0xF << chan); } outw(value, ADDR_REG(REG_DIO)); -- 2.20.1