From 21fa196fc0f4b79abb923042cb89651ca47b4b92 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Wed, 1 Jul 2015 18:13:47 +0900 Subject: [PATCH] ARM: tegra: jetson-tk1: Add GK20A GPU DT node Add the device-tree node for the GK20A GPU and leave it disabled. It is the responsibility of the bootloader to enable it if the VPR registers have been programmed such that the GPU can operate. Signed-off-by: Alexandre Courbot Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index ce5961cd0b77..66b4451eb2ca 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -53,6 +53,14 @@ }; }; + gpu@0,57000000 { + /* + * Node left disabled on purpose - the bootloader will enable + * it after having set the VPR up + */ + vdd-supply = <&vdd_gpu>; + }; + pinmux: pinmux@0,70000868 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1514,7 +1522,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; -- 2.20.1