From 2150dace47258722c67f297509bc6171e7b486ad Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 7 Jan 2011 22:26:15 +0000 Subject: [PATCH] ARM: mach-shmobile: mackerel: clarify shdi/mmcif switch settings * Pins 2 and 4 of switch 33 are documented as don't care on the PCB, my testing seems to confirm this. * I have been unable to do anything sensible with S1 set to on. Am I missing something with regards to MMC1? * Clarify which driver is needed for each switch setting. * Should the AP4 board code be updated to allow the SHDI driver to access SHDI1 as the mackerel code does? Signed-off-by: Simon Horman Acked-by: Yusuke Goda Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7b15d21f0f68..fb4213a4e15a 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -169,9 +169,8 @@ * SW1 | SW33 * | bit1 | bit2 | bit3 | bit4 * -------------+------+------+------+------- - * MMC0 OFF | OFF | ON | ON | X - * MMC1 ON | OFF | ON | X | ON - * SDHI1 OFF | ON | X | OFF | ON + * MMC0 OFF | OFF | X | ON | X (Use MMCIF) + * SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI) * */ -- 2.20.1