From 20f733e7d75a16bffc34842b7682c9247dd5f954 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Thu, 1 Sep 2005 18:26:17 -0400 Subject: [PATCH] [PATCH] libata: Marvell SATA support (PIO mode) This is my libata compatible low level driver for the Marvell SATA family. Currently it successfully runs in PIO mode on a 6081 chip. EDMA support is in the works and should be done shortly. Review, testing (especially on other flavors of Marvell), comments welcome. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/Kconfig | 9 + drivers/scsi/Makefile | 1 + drivers/scsi/sata_mv.c | 827 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 837 insertions(+) create mode 100644 drivers/scsi/sata_mv.c diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 787ad00a2b73..a261b9eea139 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -459,6 +459,15 @@ config SCSI_ATA_PIIX If unsure, say N. +config SCSI_SATA_MV + tristate "Marvell SATA support" + depends on SCSI_SATA && PCI && EXPERIMENTAL + help + This option enables support for the Marvell Serial ATA family. + Currently supports 88SX[56]0[48][01] chips. + + If unsure, say N. + config SCSI_SATA_NV tristate "NVIDIA SATA support" depends on SCSI_SATA && PCI && EXPERIMENTAL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 3746fb9fa2f5..c662b8c8cc6d 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -132,6 +132,7 @@ obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o +obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c new file mode 100644 index 000000000000..ea76fe44585e --- /dev/null +++ b/drivers/scsi/sata_mv.c @@ -0,0 +1,827 @@ +/* + * sata_mv.c - Marvell SATA support + * + * Copyright 2005: EMC Corporation, all rights reserved. + * + * Please ALWAYS copy linux-ide@vger.kernel.org on emails. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include +#include + +#define DRV_NAME "sata_mv" +#define DRV_VERSION "0.12" + +enum { + /* BAR's are enumerated in terms of pci_resource_start() terms */ + MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ + MV_IO_BAR = 2, /* offset 0x18: IO space */ + MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */ + + MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ + MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ + + MV_PCI_REG_BASE = 0, + MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ + MV_SATAHC0_REG_BASE = 0x20000, + + MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ, + MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ, + MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ + MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, + + MV_Q_CT = 32, + MV_CRQB_SZ = 32, + MV_CRPB_SZ = 8, + + MV_DMA_BOUNDARY = 0xffffffffU, + SATAHC_MASK = (~(MV_SATAHC_REG_SZ - 1)), + + MV_PORTS_PER_HC = 4, + /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ + MV_PORT_HC_SHIFT = 2, + /* == (port % MV_PORTS_PER_HC) to determine port from 0-7 port */ + MV_PORT_MASK = 3, + + /* Host Flags */ + MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ + MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ + MV_FLAG_BDMA = (1 << 28), /* Basic DMA */ + + chip_504x = 0, + chip_508x = 1, + chip_604x = 2, + chip_608x = 3, + + /* PCI interface registers */ + + PCI_MAIN_CMD_STS_OFS = 0xd30, + STOP_PCI_MASTER = (1 << 2), + PCI_MASTER_EMPTY = (1 << 3), + GLOB_SFT_RST = (1 << 4), + + PCI_IRQ_CAUSE_OFS = 0x1d58, + PCI_IRQ_MASK_OFS = 0x1d5c, + PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */ + + HC_MAIN_IRQ_CAUSE_OFS = 0x1d60, + HC_MAIN_IRQ_MASK_OFS = 0x1d64, + PORT0_ERR = (1 << 0), /* shift by port # */ + PORT0_DONE = (1 << 1), /* shift by port # */ + HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ + HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ + PCI_ERR = (1 << 18), + TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */ + TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */ + PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */ + GPIO_INT = (1 << 22), + SELF_INT = (1 << 23), + TWSI_INT = (1 << 24), + HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ + HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | + PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT | + HC_MAIN_RSVD), + + /* SATAHC registers */ + HC_CFG_OFS = 0, + + HC_IRQ_CAUSE_OFS = 0x14, + CRBP_DMA_DONE = (1 << 0), /* shift by port # */ + HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */ + DEV_IRQ = (1 << 8), /* shift by port # */ + + /* Shadow block registers */ + SHD_PIO_DATA_OFS = 0x100, + SHD_FEA_ERR_OFS = 0x104, + SHD_SECT_CNT_OFS = 0x108, + SHD_LBA_L_OFS = 0x10C, + SHD_LBA_M_OFS = 0x110, + SHD_LBA_H_OFS = 0x114, + SHD_DEV_HD_OFS = 0x118, + SHD_CMD_STA_OFS = 0x11C, + SHD_CTL_AST_OFS = 0x120, + + /* SATA registers */ + SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ + SATA_ACTIVE_OFS = 0x350, + + /* Port registers */ + EDMA_CFG_OFS = 0, + + EDMA_ERR_IRQ_CAUSE_OFS = 0x8, + EDMA_ERR_IRQ_MASK_OFS = 0xc, + EDMA_ERR_D_PAR = (1 << 0), + EDMA_ERR_PRD_PAR = (1 << 1), + EDMA_ERR_DEV = (1 << 2), + EDMA_ERR_DEV_DCON = (1 << 3), + EDMA_ERR_DEV_CON = (1 << 4), + EDMA_ERR_SERR = (1 << 5), + EDMA_ERR_SELF_DIS = (1 << 7), + EDMA_ERR_BIST_ASYNC = (1 << 8), + EDMA_ERR_CRBQ_PAR = (1 << 9), + EDMA_ERR_CRPB_PAR = (1 << 10), + EDMA_ERR_INTRL_PAR = (1 << 11), + EDMA_ERR_IORDY = (1 << 12), + EDMA_ERR_LNK_CTRL_RX = (0xf << 13), + EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), + EDMA_ERR_LNK_DATA_RX = (0xf << 17), + EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), + EDMA_ERR_LNK_DATA_TX = (0x1f << 26), + EDMA_ERR_TRANS_PROTO = (1 << 31), + EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | + EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR | + EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR | + EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 | + EDMA_ERR_LNK_DATA_RX | + EDMA_ERR_LNK_DATA_TX | + EDMA_ERR_TRANS_PROTO), + + EDMA_CMD_OFS = 0x28, + EDMA_EN = (1 << 0), + EDMA_DS = (1 << 1), + ATA_RST = (1 << 2), + + /* BDMA is 6xxx part only */ + BDMA_CMD_OFS = 0x224, + BDMA_START = (1 << 0), + + MV_UNDEF = 0, +}; + +struct mv_port_priv { + +}; + +struct mv_host_priv { + +}; + +static void mv_irq_clear(struct ata_port *ap); +static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); +static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); +static void mv_phy_reset(struct ata_port *ap); +static int mv_master_reset(void __iomem *mmio_base); +static irqreturn_t mv_interrupt(int irq, void *dev_instance, + struct pt_regs *regs); +static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +static Scsi_Host_Template mv_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = MV_UNDEF, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = MV_UNDEF, + .proc_name = DRV_NAME, + .dma_boundary = MV_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, + .ordered_flush = 1, +}; + +static struct ata_port_operations mv_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = mv_phy_reset, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = mv_interrupt, + .irq_clear = mv_irq_clear, + + .scr_read = mv_scr_read, + .scr_write = mv_scr_write, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static struct ata_port_info mv_port_info[] = { + { /* chip_504x */ + .sht = &mv_sht, + .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), + .pio_mask = 0x1f, /* pio4-0 */ + .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .port_ops = &mv_ops, + }, + { /* chip_508x */ + .sht = &mv_sht, + .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio4-0 */ + .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .port_ops = &mv_ops, + }, + { /* chip_604x */ + .sht = &mv_sht, + .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA), + .pio_mask = 0x1f, /* pio4-0 */ + .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .port_ops = &mv_ops, + }, + { /* chip_608x */ + .sht = &mv_sht, + .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC | + MV_FLAG_BDMA), + .pio_mask = 0x1f, /* pio4-0 */ + .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .port_ops = &mv_ops, + }, +}; + +static struct pci_device_id mv_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_508x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x}, + + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x}, + {} /* terminate list */ +}; + +static struct pci_driver mv_pci_driver = { + .name = DRV_NAME, + .id_table = mv_pci_tbl, + .probe = mv_init_one, + .remove = ata_pci_remove_one, +}; + +/* + * Functions + */ + +static inline void writelfl(unsigned long data, void __iomem *addr) +{ + writel(data, addr); + (void) readl(addr); /* flush to avoid PCI posted write */ +} + +static inline void __iomem *mv_port_addr_to_hc_base(void __iomem *port_mmio) +{ + return ((void __iomem *)((unsigned long)port_mmio & + (unsigned long)SATAHC_MASK)); +} + +static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) +{ + return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); +} + +static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) +{ + return (mv_hc_base(base, port >> MV_PORT_HC_SHIFT) + + MV_SATAHC_ARBTR_REG_SZ + + ((port & MV_PORT_MASK) * MV_PORT_REG_SZ)); +} + +static inline void __iomem *mv_ap_base(struct ata_port *ap) +{ + return mv_port_base(ap->host_set->mmio_base, ap->port_no); +} + +static inline int mv_get_hc_count(unsigned long flags) +{ + return ((flags & MV_FLAG_DUAL_HC) ? 2 : 1); +} + +static inline int mv_is_edma_active(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + return (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); +} + +static inline int mv_port_bdma_capable(struct ata_port *ap) +{ + return (ap->flags & MV_FLAG_BDMA); +} + +static void mv_irq_clear(struct ata_port *ap) +{ +} + +static unsigned int mv_scr_offset(unsigned int sc_reg_in) +{ + unsigned int ofs; + + switch (sc_reg_in) { + case SCR_STATUS: + case SCR_CONTROL: + case SCR_ERROR: + ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32)); + break; + case SCR_ACTIVE: + ofs = SATA_ACTIVE_OFS; /* active is not with the others */ + break; + default: + ofs = 0xffffffffU; + break; + } + return ofs; +} + +static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in) +{ + unsigned int ofs = mv_scr_offset(sc_reg_in); + + if (0xffffffffU != ofs) { + return readl(mv_ap_base(ap) + ofs); + } else { + return (u32) ofs; + } +} + +static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) +{ + unsigned int ofs = mv_scr_offset(sc_reg_in); + + if (0xffffffffU != ofs) { + writelfl(val, mv_ap_base(ap) + ofs); + } +} + +static int mv_master_reset(void __iomem *mmio_base) +{ + void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; + int i, rc = 0; + u32 t; + + VPRINTK("ENTER\n"); + + /* Following procedure defined in PCI "main command and status + * register" table. + */ + t = readl(reg); + writel(t | STOP_PCI_MASTER, reg); + + for (i = 0; i < 100; i++) { + msleep(10); + t = readl(reg); + if (PCI_MASTER_EMPTY & t) { + break; + } + } + if (!(PCI_MASTER_EMPTY & t)) { + printk(KERN_ERR DRV_NAME "PCI master won't flush\n"); + rc = 1; /* broken HW? */ + goto done; + } + + /* set reset */ + i = 5; + do { + writel(t | GLOB_SFT_RST, reg); + t = readl(reg); + udelay(1); + } while (!(GLOB_SFT_RST & t) && (i-- > 0)); + + if (!(GLOB_SFT_RST & t)) { + printk(KERN_ERR DRV_NAME "can't set global reset\n"); + rc = 1; /* broken HW? */ + goto done; + } + + /* clear reset */ + i = 5; + do { + writel(t & ~GLOB_SFT_RST, reg); + t = readl(reg); + udelay(1); + } while ((GLOB_SFT_RST & t) && (i-- > 0)); + + if (GLOB_SFT_RST & t) { + printk(KERN_ERR DRV_NAME "can't clear global reset\n"); + rc = 1; /* broken HW? */ + } + + done: + VPRINTK("EXIT, rc = %i\n", rc); + return rc; +} + +static void mv_err_intr(struct ata_port *ap) +{ + void __iomem *port_mmio; + u32 edma_err_cause, serr = 0; + + /* bug here b/c we got an err int on a port we don't know about, + * so there's no way to clear it + */ + BUG_ON(NULL == ap); + port_mmio = mv_ap_base(ap); + + edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + if (EDMA_ERR_SERR & edma_err_cause) { + serr = scr_read(ap, SCR_ERROR); + scr_write_flush(ap, SCR_ERROR, serr); + } + DPRINTK("port %u error; EDMA err cause: 0x%08x SERR: 0x%08x\n", + ap->port_no, edma_err_cause, serr); + + /* Clear EDMA now that SERR cleanup done */ + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + /* check for fatal here and recover if needed */ + if (EDMA_ERR_FATAL & edma_err_cause) { + mv_phy_reset(ap); + } +} + +/* Handle any outstanding interrupts in a single SATAHC + */ +static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, + unsigned int hc) +{ + void __iomem *mmio = host_set->mmio_base; + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + struct ata_port *ap; + struct ata_queued_cmd *qc; + u32 hc_irq_cause; + int shift, port, port0, hard_port; + u8 ata_status; + + if (hc == 0) { + port0 = 0; + } else { + port0 = MV_PORTS_PER_HC; + } + + /* we'll need the HC success int register in most cases */ + hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); + if (hc_irq_cause) { + writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); + } + + VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", + hc,relevant,hc_irq_cause); + + for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { + ap = host_set->ports[port]; + hard_port = port & MV_PORT_MASK; /* range 0-3 */ + ata_status = 0xffU; + + if (((CRBP_DMA_DONE | DEV_IRQ) << hard_port) & hc_irq_cause) { + BUG_ON(NULL == ap); + /* rcv'd new resp, basic DMA complete, or ATA IRQ */ + /* This is needed to clear the ATA INTRQ. + * FIXME: don't read the status reg in EDMA mode! + */ + ata_status = readb((void __iomem *) + ap->ioaddr.status_addr); + } + + shift = port * 2; + if (port >= MV_PORTS_PER_HC) { + shift++; /* skip bit 8 in the HC Main IRQ reg */ + } + if ((PORT0_ERR << shift) & relevant) { + mv_err_intr(ap); + /* FIXME: smart to OR in ATA_ERR? */ + ata_status = readb((void __iomem *) + ap->ioaddr.status_addr) | ATA_ERR; + } + + if (ap) { + qc = ata_qc_from_tag(ap, ap->active_tag); + if (NULL != qc) { + VPRINTK("port %u IRQ found for qc, " + "ata_status 0x%x\n", port,ata_status); + BUG_ON(0xffU == ata_status); + /* mark qc status appropriately */ + ata_qc_complete(qc, ata_status); + } + } + } + VPRINTK("EXIT\n"); +} + +static irqreturn_t mv_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int hc, handled = 0, n_hcs; + void __iomem *mmio; + u32 irq_stat; + + mmio = host_set->mmio_base; + irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); + n_hcs = mv_get_hc_count(host_set->ports[0]->flags); + + /* check the cases where we either have nothing pending or have read + * a bogus register value which can indicate HW removal or PCI fault + */ + if (!irq_stat || (0xffffffffU == irq_stat)) { + return IRQ_NONE; + } + + spin_lock(&host_set->lock); + + for (hc = 0; hc < n_hcs; hc++) { + u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); + if (relevant) { + mv_host_intr(host_set, relevant, hc); + handled = 1; + } + } + if (PCI_ERR & irq_stat) { + /* FIXME: these are all masked by default, but still need + * to recover from them properly. + */ + } + + spin_unlock(&host_set->lock); + + return IRQ_RETVAL(handled); +} + +static void mv_phy_reset(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct ata_taskfile tf; + struct ata_device *dev = &ap->device[0]; + u32 edma = 0, bdma; + + VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); + + edma = readl(port_mmio + EDMA_CMD_OFS); + if (EDMA_EN & edma) { + /* disable EDMA if active */ + edma &= ~EDMA_EN; + writelfl(edma | EDMA_DS, port_mmio + EDMA_CMD_OFS); + udelay(1); + } else if (mv_port_bdma_capable(ap) && + (bdma = readl(port_mmio + BDMA_CMD_OFS)) & BDMA_START) { + /* disable BDMA if active */ + writelfl(bdma & ~BDMA_START, port_mmio + BDMA_CMD_OFS); + } + + writelfl(edma | ATA_RST, port_mmio + EDMA_CMD_OFS); + udelay(25); /* allow reset propagation */ + + /* Spec never mentions clearing the bit. Marvell's driver does + * clear the bit, however. + */ + writelfl(edma & ~ATA_RST, port_mmio + EDMA_CMD_OFS); + + VPRINTK("Done. Now calling __sata_phy_reset()\n"); + + /* proceed to init communications via the scr_control reg */ + __sata_phy_reset(ap); + + if (ap->flags & ATA_FLAG_PORT_DISABLED) { + VPRINTK("Port disabled pre-sig. Exiting.\n"); + return; + } + + tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); + tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); + tf.lbal = readb((void __iomem *) ap->ioaddr.lbal_addr); + tf.nsect = readb((void __iomem *) ap->ioaddr.nsect_addr); + + dev->class = ata_dev_classify(&tf); + if (!ata_dev_present(dev)) { + VPRINTK("Port disabled post-sig: No device present.\n"); + ata_port_disable(ap); + } + VPRINTK("EXIT\n"); +} + +static void mv_port_init(struct ata_ioports *port, unsigned long base) +{ + /* PIO related setup */ + port->data_addr = base + SHD_PIO_DATA_OFS; + port->error_addr = port->feature_addr = base + SHD_FEA_ERR_OFS; + port->nsect_addr = base + SHD_SECT_CNT_OFS; + port->lbal_addr = base + SHD_LBA_L_OFS; + port->lbam_addr = base + SHD_LBA_M_OFS; + port->lbah_addr = base + SHD_LBA_H_OFS; + port->device_addr = base + SHD_DEV_HD_OFS; + port->status_addr = port->command_addr = base + SHD_CMD_STA_OFS; + port->altstatus_addr = port->ctl_addr = base + SHD_CTL_AST_OFS; + /* unused */ + port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; + + /* unmask all EDMA error interrupts */ + writel(~0, (void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS); + + VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", + readl((void __iomem *)base + EDMA_CFG_OFS), + readl((void __iomem *)base + EDMA_ERR_IRQ_CAUSE_OFS), + readl((void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS)); +} + +static int mv_host_init(struct ata_probe_ent *probe_ent) +{ + int rc = 0, n_hc, port, hc; + void __iomem *mmio = probe_ent->mmio_base; + void __iomem *port_mmio; + + if (mv_master_reset(probe_ent->mmio_base)) { + rc = 1; + goto done; + } + + n_hc = mv_get_hc_count(probe_ent->host_flags); + probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; + + for (port = 0; port < probe_ent->n_ports; port++) { + port_mmio = mv_port_base(mmio, port); + mv_port_init(&probe_ent->port[port], (unsigned long)port_mmio); + } + + for (hc = 0; hc < n_hc; hc++) { + VPRINTK("HC%i: HC config=0x%08x HC IRQ cause=0x%08x\n", hc, + readl(mv_hc_base(mmio, hc) + HC_CFG_OFS), + readl(mv_hc_base(mmio, hc) + HC_IRQ_CAUSE_OFS)); + } + + writel(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); + writel(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + + VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " + "PCI int cause/mask=0x%08x/0x%08x\n", + readl(mmio + HC_MAIN_IRQ_CAUSE_OFS), + readl(mmio + HC_MAIN_IRQ_MASK_OFS), + readl(mmio + PCI_IRQ_CAUSE_OFS), + readl(mmio + PCI_IRQ_MASK_OFS)); + + done: + return rc; +} + +static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version = 0; + struct ata_probe_ent *probe_ent = NULL; + struct mv_host_priv *hpriv; + unsigned int board_idx = (unsigned int)ent->driver_data; + void __iomem *mmio_base; + int pci_dev_busy = 0; + int rc; + + if (!printed_version++) { + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + } + + VPRINTK("ENTER for PCI Bus:Slot.Func=%u:%u.%u\n", pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + rc = pci_enable_device(pdev); + if (rc) { + return rc; + } + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + pci_intx(pdev, 1); + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = ioremap_nocache(pci_resource_start(pdev, MV_PRIMARY_BAR), + pci_resource_len(pdev, MV_PRIMARY_BAR)); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + rc = -ENOMEM; + goto err_out_iounmap; + } + memset(hpriv, 0, sizeof(*hpriv)); + + probe_ent->sht = mv_port_info[board_idx].sht; + probe_ent->host_flags = mv_port_info[board_idx].host_flags; + probe_ent->pio_mask = mv_port_info[board_idx].pio_mask; + probe_ent->udma_mask = mv_port_info[board_idx].udma_mask; + probe_ent->port_ops = mv_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = mmio_base; + probe_ent->private_data = hpriv; + + /* initialize adapter */ + rc = mv_host_init(probe_ent); + if (rc) { + goto err_out_hpriv; + } +/* mv_print_info(probe_ent); */ + + { + int b, w; + u32 dw[4]; /* hold a line of 16b */ + VPRINTK("PCI config space:\n"); + for (b = 0; b < 0x40; ) { + for (w = 0; w < 4; w++) { + (void) pci_read_config_dword(pdev,b,&dw[w]); + b += sizeof(*dw); + } + VPRINTK("%08x %08x %08x %08x\n", + dw[0],dw[1],dw[2],dw[3]); + } + } + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + + err_out_hpriv: + kfree(hpriv); + err_out_iounmap: + iounmap(mmio_base); + err_out_free_ent: + kfree(probe_ent); + err_out_regions: + pci_release_regions(pdev); + err_out: + if (!pci_dev_busy) { + pci_disable_device(pdev); + } + + return rc; +} + +static int __init mv_init(void) +{ + return pci_module_init(&mv_pci_driver); +} + +static void __exit mv_exit(void) +{ + pci_unregister_driver(&mv_pci_driver); +} + +MODULE_AUTHOR("Brett Russ"); +MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, mv_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(mv_init); +module_exit(mv_exit); -- 2.20.1