From 20d853fd0703b1d73c35a22024c0d4fcbcc57c8c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 12 Sep 2017 21:37:03 +0200 Subject: [PATCH] watchdog/hardlockup/perf: Remove broken self disable on failure The self disabling feature is broken vs. CPU hotplug locking: CPU 0 CPU 1 cpus_write_lock(); cpu_up(1) wait_for_completion() .... unpark_watchdog() ->unpark() perf_event_create() <- fails watchdog_enable &= ~NMI_WATCHDOG; .... cpus_write_unlock(); CPU 2 cpus_write_lock() cpu_down(2) wait_for_completion() wakeup(watchdog); watchdog() if (!(watchdog_enable & NMI_WATCHDOG)) watchdog_nmi_disable() perf_event_disable() .... cpus_read_lock(); stop_smpboot_threads() park_watchdog(); wait_for_completion(watchdog->parked); Result: End of hotplug and instantaneous full lockup of the machine. There is a similar problem with disabling the watchdog via the user space interface as the sysctl function fiddles with watchdog_enable directly. It's very debatable whether this is required at all. If the watchdog works nicely on N CPUs and it fails to enable on the N + 1 CPU either during hotplug or because the user space interface disabled it via sysctl cpumask and then some perf user grabbed the counter which is then unavailable for the watchdog when the sysctl cpumask gets changed back. There is no real justification for this. One of the reasons WHY this is done is the utter stupidity of the init code of the perf NMI watchdog. Instead of checking upfront at boot whether PERF is available and functional at all, it just does this check at run time over and over when user space fiddles with the sysctl. That's broken beyond repair along with the idiotic error code dependent warn level printks and the even more silly printk rate limiting. If the init code checks whether perf works at boot time, then this mess can be more or less avoided completely. Perf does not come magically into life at runtime. Brain usage while coding is overrated. Remove the cruft and add a temporary safe guard which gets removed later. Signed-off-by: Thomas Gleixner Reviewed-by: Don Zickus Cc: Andrew Morton Cc: Borislav Petkov Cc: Chris Metcalf Cc: Linus Torvalds Cc: Nicholas Piggin Cc: Peter Zijlstra Cc: Sebastian Siewior Cc: Ulrich Obergfell Link: http://lkml.kernel.org/r/20170912194146.806708429@linutronix.de Signed-off-by: Ingo Molnar --- kernel/watchdog.c | 15 --------------- kernel/watchdog_hld.c | 20 +++++++------------- 2 files changed, 7 insertions(+), 28 deletions(-) diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 1c185d9dd468..af000956286c 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -485,21 +485,6 @@ static void watchdog(unsigned int cpu) __this_cpu_write(soft_lockup_hrtimer_cnt, __this_cpu_read(hrtimer_interrupts)); __touch_watchdog(); - - /* - * watchdog_nmi_enable() clears the NMI_WATCHDOG_ENABLED bit in the - * failure path. Check for failures that can occur asynchronously - - * for example, when CPUs are on-lined - and shut down the hardware - * perf event on each CPU accordingly. - * - * The only non-obvious place this bit can be cleared is through - * watchdog_nmi_enable(), so a pr_info() is placed there. Placing a - * pr_info here would be too noisy as it would result in a message - * every few seconds if the hardlockup was disabled but the softlockup - * enabled. - */ - if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED)) - watchdog_nmi_disable(cpu); } static struct smp_hotplug_thread watchdog_threads = { diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c index c9586ebc2e98..7b602714ea53 100644 --- a/kernel/watchdog_hld.c +++ b/kernel/watchdog_hld.c @@ -23,6 +23,7 @@ static DEFINE_PER_CPU(bool, watchdog_nmi_touch); static DEFINE_PER_CPU(struct perf_event *, watchdog_ev); static unsigned long hardlockup_allcpu_dumped; +static bool hardlockup_detector_disabled; void arch_touch_nmi_watchdog(void) { @@ -178,6 +179,10 @@ int watchdog_nmi_enable(unsigned int cpu) if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED)) goto out; + /* A failure disabled the hardlockup detector permanently */ + if (hardlockup_detector_disabled) + return -ENODEV; + /* is it already setup and enabled? */ if (event && event->state > PERF_EVENT_STATE_OFF) goto out; @@ -206,18 +211,6 @@ int watchdog_nmi_enable(unsigned int cpu) goto out_save; } - /* - * Disable the hard lockup detector if _any_ CPU fails to set up - * set up the hardware perf event. The watchdog() function checks - * the NMI_WATCHDOG_ENABLED bit periodically. - * - * The barriers are for syncing up watchdog_enabled across all the - * cpus, as clear_bit() does not use barriers. - */ - smp_mb__before_atomic(); - clear_bit(NMI_WATCHDOG_ENABLED_BIT, &watchdog_enabled); - smp_mb__after_atomic(); - /* skip displaying the same error again */ if (!firstcpu && (PTR_ERR(event) == firstcpu_err)) return PTR_ERR(event); @@ -232,7 +225,8 @@ int watchdog_nmi_enable(unsigned int cpu) pr_err("disabled (cpu%i): unable to create perf event: %ld\n", cpu, PTR_ERR(event)); - pr_info("Shutting down hard lockup detector on all cpus\n"); + pr_info("Disabling hard lockup detector permanently\n"); + hardlockup_detector_disabled = true; return PTR_ERR(event); -- 2.20.1