From 1fb7f12d5bec1b0a699c85d724bd5184a01fa2dd Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 22 Oct 2015 13:05:03 -0700 Subject: [PATCH] usb: dwc2: host: Fix remote wakeup when not in DWC2_L2 In commit 734643dfbdde ("usb: dwc2: host: add flag to reflect bus state") we changed dwc2_port_suspend() not to set the lx_state anymore (instead it sets the new bus_suspended variable). This introduced a bug where we would fail to detect device insertions if: 1. Plug empty hub into dwc2 2. Plug USB flash drive into the empty hub. 3. Wait a few seconds 4. Unplug USB flash drive 5. Less than 2 seconds after step 4, plug the USB flash drive in again. The dwc2_hcd_rem_wakeup() function should have been changed to look at the new bus_suspended variable. Let's fix it. Since commit b46146d59fda ("usb: dwc2: host: resume root hub on remote wakeup") talks about needing the root hub resumed if the bus was suspended, we'll include it in our test. It appears that the "port_l1_change" should only be set to 1 if we were in DWC2_L1 (the driver currently never sets this), so we'll update the former "else" case based on this test. Fixes: 734643dfbdde ("usb: dwc2: host: add flag to reflect bus state") Acked-by: John Youn Tested-by: Gregory Herrero Reviewed-by: Heiko Stuebner Signed-off-by: Douglas Anderson Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index e79baf73c234..571c21727ff9 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -324,12 +324,13 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) */ static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) { - if (hsotg->lx_state == DWC2_L2) { + if (hsotg->bus_suspended) { hsotg->flags.b.port_suspend_change = 1; usb_hcd_resume_root_hub(hsotg->priv); - } else { - hsotg->flags.b.port_l1_change = 1; } + + if (hsotg->lx_state == DWC2_L1) + hsotg->flags.b.port_l1_change = 1; } /** @@ -1428,8 +1429,8 @@ static void dwc2_wakeup_detected(unsigned long data) dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", dwc2_readl(hsotg->regs + HPRT0)); - hsotg->bus_suspended = 0; dwc2_hcd_rem_wakeup(hsotg); + hsotg->bus_suspended = 0; /* Change to L0 state */ hsotg->lx_state = DWC2_L0; -- 2.20.1