From 1cf62246c0e394021e494e0a8f1013e80db1a1a9 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 16 Apr 2010 08:07:04 -0700 Subject: [PATCH] USB: xhci: properly set the "Mult" field of the endpoint context. A SuperSpeed interrupt or isochronous endpoint can define the number of "burst transactions" it can handle in a service interval. This is indicated by the "Mult" bits in the bmAttributes of the SuperSpeed Endpoint Companion Descriptor. For example, if it has a max packet size of 1024, a max burst of 11, and a mult of 3, the host may send 33 1024-byte packets in one service interval. We must tell the xHCI host controller the number of multiple service opportunities (mults) the device can handle when the endpoint is installed. We do that by setting the Mult field of the Endpoint Context before a configure endpoint command is sent down. The Mult field is invalid for control or bulk SuperSpeed endpoints. Signed-off-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index c09539bad1ee..4ed9f5f7a146 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -582,6 +582,19 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, return EP_INTERVAL(interval); } +/* The "Mult" field in the endpoint context is only set for SuperSpeed devices. + * High speed endpoint descriptors can define "the number of additional + * transaction opportunities per microframe", but that goes in the Max Burst + * endpoint context field. + */ +static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + if (udev->speed != USB_SPEED_SUPER || !ep->ss_ep_comp) + return 0; + return ep->ss_ep_comp->desc.bmAttributes; +} + static inline u32 xhci_get_endpoint_type(struct usb_device *udev, struct usb_host_endpoint *ep) { @@ -644,6 +657,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state; ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep); + ep_ctx->ep_info |= EP_MULT(xhci_get_endpoint_mult(udev, ep)); /* FIXME dig Mult and streams info out of ep companion desc */ -- 2.20.1