From 1cbf4c563c0eaaf11c552a88b374e213181c6ddd Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 16 Sep 2004 11:07:00 -0400 Subject: [PATCH] [ACPI] Allow return to active cooling mode once passive mode is entered http://bugzilla.kernel.org/show_bug.cgi?id=3410 https://bugzilla.novell.com/show_bug.cgi?id=131543 Signed-off-by: Thomas Renninger Signed-off-by: Konstantin Karasyov Signed-off-by: Alexey Starikovskiy Signed-off-by: Yu Luming Signed-off-by: Andrew Morton --- drivers/acpi/processor_thermal.c | 38 ++++--- drivers/acpi/thermal.c | 163 ++++++++++++++++--------------- 2 files changed, 108 insertions(+), 93 deletions(-) diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 37528c3b64b..f3758401532 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -101,9 +101,7 @@ static unsigned int acpi_thermal_cpufreq_is_init = 0; static int cpu_has_cpufreq(unsigned int cpu) { struct cpufreq_policy policy; - if (!acpi_thermal_cpufreq_is_init) - return -ENODEV; - if (!cpufreq_get_policy(&policy, cpu)) + if (!acpi_thermal_cpufreq_is_init || cpufreq_get_policy(&policy, cpu)) return -ENODEV; return 0; } @@ -127,13 +125,13 @@ static int acpi_thermal_cpufreq_decrease(unsigned int cpu) if (!cpu_has_cpufreq(cpu)) return -ENODEV; - if (cpufreq_thermal_reduction_pctg[cpu] >= 20) { + if (cpufreq_thermal_reduction_pctg[cpu] > 20) cpufreq_thermal_reduction_pctg[cpu] -= 20; - cpufreq_update_policy(cpu); - return 0; - } - - return -ERANGE; + else + cpufreq_thermal_reduction_pctg[cpu] = 0; + cpufreq_update_policy(cpu); + /* We reached max freq again and can leave passive mode */ + return !cpufreq_thermal_reduction_pctg[cpu]; } static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb, @@ -200,7 +198,7 @@ int acpi_processor_set_thermal_limit(acpi_handle handle, int type) int result = 0; struct acpi_processor *pr = NULL; struct acpi_device *device = NULL; - int tx = 0; + int tx = 0, max_tx_px = 0; ACPI_FUNCTION_TRACE("acpi_processor_set_thermal_limit"); @@ -259,19 +257,27 @@ int acpi_processor_set_thermal_limit(acpi_handle handle, int type) /* if going down: T-states first, P-states later */ if (pr->flags.throttling) { - if (tx == 0) + if (tx == 0) { + max_tx_px = 1; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "At minimum throttling state\n")); - else { + } else { tx--; goto end; } } result = acpi_thermal_cpufreq_decrease(pr->id); - if (result == -ERANGE) + if (result) { + /* + * We only could get -ERANGE, 1 or 0. + * In the first two cases we reached max freq again. + */ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "At minimum performance state\n")); + max_tx_px = 1; + } else + max_tx_px = 0; break; } @@ -290,8 +296,10 @@ int acpi_processor_set_thermal_limit(acpi_handle handle, int type) pr->limit.thermal.px, pr->limit.thermal.tx)); } else result = 0; - - return_VALUE(result); + if (max_tx_px) + return_VALUE(1); + else + return_VALUE(result); } int acpi_processor_get_limit_info(struct acpi_processor *pr) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index a24847c08f7..19f3ea48475 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -72,7 +72,7 @@ #define _COMPONENT ACPI_THERMAL_COMPONENT ACPI_MODULE_NAME("acpi_thermal") - MODULE_AUTHOR("Paul Diefenbaugh"); +MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION(ACPI_THERMAL_DRIVER_NAME); MODULE_LICENSE("GPL"); @@ -517,9 +517,9 @@ static int acpi_thermal_hot(struct acpi_thermal *tz) return_VALUE(0); } -static int acpi_thermal_passive(struct acpi_thermal *tz) +static void acpi_thermal_passive(struct acpi_thermal *tz) { - int result = 0; + int result = 1; struct acpi_thermal_passive *passive = NULL; int trend = 0; int i = 0; @@ -527,7 +527,7 @@ static int acpi_thermal_passive(struct acpi_thermal *tz) ACPI_FUNCTION_TRACE("acpi_thermal_passive"); if (!tz || !tz->trips.passive.flags.valid) - return_VALUE(-EINVAL); + return; passive = &(tz->trips.passive); @@ -547,7 +547,7 @@ static int acpi_thermal_passive(struct acpi_thermal *tz) trend, passive->tc1, tz->temperature, tz->last_temperature, passive->tc2, tz->temperature, passive->temperature)); - tz->trips.passive.flags.enabled = 1; + passive->flags.enabled = 1; /* Heating up? */ if (trend > 0) for (i = 0; i < passive->devices.count; i++) @@ -556,12 +556,32 @@ static int acpi_thermal_passive(struct acpi_thermal *tz) handles[i], ACPI_PROCESSOR_LIMIT_INCREMENT); /* Cooling off? */ - else if (trend < 0) + else if (trend < 0) { for (i = 0; i < passive->devices.count; i++) - acpi_processor_set_thermal_limit(passive-> - devices. - handles[i], - ACPI_PROCESSOR_LIMIT_DECREMENT); + /* + * assume that we are on highest + * freq/lowest thrott and can leave + * passive mode, even in error case + */ + if (!acpi_processor_set_thermal_limit + (passive->devices.handles[i], + ACPI_PROCESSOR_LIMIT_DECREMENT)) + result = 0; + /* + * Leave cooling mode, even if the temp might + * higher than trip point This is because some + * machines might have long thermal polling + * frequencies (tsp) defined. We will fall back + * into passive mode in next cycle (probably quicker) + */ + if (result) { + passive->flags.enabled = 0; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Disabling passive cooling, still above threshold," + " but we are cooling down\n")); + } + } + return; } /* @@ -571,23 +591,21 @@ static int acpi_thermal_passive(struct acpi_thermal *tz) * and avoid thrashing around the passive trip point. Note that we * assume symmetry. */ - else if (tz->trips.passive.flags.enabled) { - for (i = 0; i < passive->devices.count; i++) - result = - acpi_processor_set_thermal_limit(passive->devices. - handles[i], - ACPI_PROCESSOR_LIMIT_DECREMENT); - if (result == 1) { - tz->trips.passive.flags.enabled = 0; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Disabling passive cooling (zone is cool)\n")); - } + if (!passive->flags.enabled) + return; + for (i = 0; i < passive->devices.count; i++) + if (!acpi_processor_set_thermal_limit + (passive->devices.handles[i], + ACPI_PROCESSOR_LIMIT_DECREMENT)) + result = 0; + if (result) { + passive->flags.enabled = 0; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Disabling passive cooling (zone is cool)\n")); } - - return_VALUE(0); } -static int acpi_thermal_active(struct acpi_thermal *tz) +static void acpi_thermal_active(struct acpi_thermal *tz) { int result = 0; struct acpi_thermal_active *active = NULL; @@ -598,74 +616,66 @@ static int acpi_thermal_active(struct acpi_thermal *tz) ACPI_FUNCTION_TRACE("acpi_thermal_active"); if (!tz) - return_VALUE(-EINVAL); + return; for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { - active = &(tz->trips.active[i]); if (!active || !active->flags.valid) break; - - /* - * Above Threshold? - * ---------------- - * If not already enabled, turn ON all cooling devices - * associated with this active threshold. - */ if (tz->temperature >= active->temperature) { + /* + * Above Threshold? + * ---------------- + * If not already enabled, turn ON all cooling devices + * associated with this active threshold. + */ if (active->temperature > maxtemp) - tz->state.active_index = i, maxtemp = - active->temperature; - if (!active->flags.enabled) { - for (j = 0; j < active->devices.count; j++) { - result = - acpi_bus_set_power(active->devices. - handles[j], - ACPI_STATE_D0); - if (result) { - ACPI_DEBUG_PRINT((ACPI_DB_WARN, - "Unable to turn cooling device [%p] 'on'\n", - active-> - devices. - handles[j])); - continue; - } - active->flags.enabled = 1; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Cooling device [%p] now 'on'\n", - active->devices. - handles[j])); - } - } - } - /* - * Below Threshold? - * ---------------- - * Turn OFF all cooling devices associated with this - * threshold. - */ - else if (active->flags.enabled) { + tz->state.active_index = i; + maxtemp = active->temperature; + if (active->flags.enabled) + continue; for (j = 0; j < active->devices.count; j++) { result = acpi_bus_set_power(active->devices. handles[j], - ACPI_STATE_D3); + ACPI_STATE_D0); if (result) { ACPI_DEBUG_PRINT((ACPI_DB_WARN, - "Unable to turn cooling device [%p] 'off'\n", + "Unable to turn cooling device [%p] 'on'\n", active->devices. handles[j])); continue; } - active->flags.enabled = 0; + active->flags.enabled = 1; ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Cooling device [%p] now 'off'\n", + "Cooling device [%p] now 'on'\n", active->devices.handles[j])); } + continue; + } + if (!active->flags.enabled) + continue; + /* + * Below Threshold? + * ---------------- + * Turn OFF all cooling devices associated with this + * threshold. + */ + for (j = 0; j < active->devices.count; j++) { + result = acpi_bus_set_power(active->devices.handles[j], + ACPI_STATE_D3); + if (result) { + ACPI_DEBUG_PRINT((ACPI_DB_WARN, + "Unable to turn cooling device [%p] 'off'\n", + active->devices.handles[j])); + continue; + } + active->flags.enabled = 0; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Cooling device [%p] now 'off'\n", + active->devices.handles[j])); } } - - return_VALUE(0); } static void acpi_thermal_check(void *context); @@ -744,15 +754,12 @@ static void acpi_thermal_check(void *data) * Again, separated from the above two to allow independent policy * decisions. */ - if (tz->trips.critical.flags.enabled) - tz->state.critical = 1; - if (tz->trips.hot.flags.enabled) - tz->state.hot = 1; - if (tz->trips.passive.flags.enabled) - tz->state.passive = 1; + tz->state.critical = tz->trips.critical.flags.enabled; + tz->state.hot = tz->trips.hot.flags.enabled; + tz->state.passive = tz->trips.passive.flags.enabled; + tz->state.active = 0; for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) - if (tz->trips.active[i].flags.enabled) - tz->state.active = 1; + tz->state.active |= tz->trips.active[i].flags.enabled; /* * Calculate Sleep Time -- 2.20.1