From 1acb30ef28c4cb08bc6f7bc7f68ee7eebd4b9c84 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Fri, 20 May 2011 20:48:33 +0900 Subject: [PATCH] USB: ehci-s5p: add PM support This patch adds power management support such as suspend and resume functions. Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-s5p.c | 95 +++++++++++++++++++++++++++++++++++++ 1 file changed, 95 insertions(+) diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index e3374c8f7b3f..b3958b3d3163 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -189,6 +189,100 @@ static void s5p_ehci_shutdown(struct platform_device *pdev) hcd->driver->shutdown(hcd); } +#ifdef CONFIG_PM +static int s5p_ehci_suspend(struct device *dev) +{ + struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); + struct usb_hcd *hcd = s5p_ehci->hcd; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct platform_device *pdev = to_platform_device(dev); + struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; + unsigned long flags; + int rc = 0; + + if (time_before(jiffies, ehci->next_statechange)) + msleep(20); + + /* + * Root hub was already suspended. Disable irq emission and + * mark HW unaccessible. The PM and USB cores make sure that + * the root hub is either suspended or stopped. + */ + ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); + spin_lock_irqsave(&ehci->lock, flags); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + (void)ehci_readl(ehci, &ehci->regs->intr_enable); + + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + spin_unlock_irqrestore(&ehci->lock, flags); + + if (pdata && pdata->phy_exit) + pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + + return rc; +} + +static int s5p_ehci_resume(struct device *dev) +{ + struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); + struct usb_hcd *hcd = s5p_ehci->hcd; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct platform_device *pdev = to_platform_device(dev); + struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; + + if (pdata && pdata->phy_init) + pdata->phy_init(pdev, S5P_USB_PHY_HOST); + + if (time_before(jiffies, ehci->next_statechange)) + msleep(100); + + /* Mark hardware accessible again as we are out of D3 state by now */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { + int mask = INTR_MASK; + + ehci_prepare_ports_for_controller_resume(ehci); + if (!hcd->self.root_hub->do_remote_wakeup) + mask &= ~STS_PCD; + ehci_writel(ehci, mask, &ehci->regs->intr_enable); + ehci_readl(ehci, &ehci->regs->intr_enable); + return 0; + } + + usb_root_hub_lost_power(hcd->self.root_hub); + + (void) ehci_halt(ehci); + (void) ehci_reset(ehci); + + /* emptying the schedule aborts any urbs */ + spin_lock_irq(&ehci->lock); + if (ehci->reclaim) + end_unlink_async(ehci); + ehci_work(ehci); + spin_unlock_irq(&ehci->lock); + + ehci_writel(ehci, ehci->command, &ehci->regs->command); + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ + + /* here we "know" root ports should always stay powered */ + ehci_port_power(ehci, 1); + + hcd->state = HC_STATE_SUSPENDED; + + return 0; +} +#else +#define s5p_ehci_suspend NULL +#define s5p_ehci_resume NULL +#endif + +static const struct dev_pm_ops s5p_ehci_pm_ops = { + .suspend = s5p_ehci_suspend, + .resume = s5p_ehci_resume, +}; + static struct platform_driver s5p_ehci_driver = { .probe = s5p_ehci_probe, .remove = __devexit_p(s5p_ehci_remove), @@ -196,6 +290,7 @@ static struct platform_driver s5p_ehci_driver = { .driver = { .name = "s5p-ehci", .owner = THIS_MODULE, + .pm = &s5p_ehci_pm_ops, } }; -- 2.20.1