From 1aa844cd56c7a2b94824f02495ff7ae5d52a7e91 Mon Sep 17 00:00:00 2001 From: Ben Zhang Date: Tue, 15 Dec 2015 13:51:25 -0800 Subject: [PATCH] ASoC: rt5677: Reconfigure PLL1 after resume Sometimes PLL1 stops working if the codec loses power during suspend (when pow-ldo2 or reset gpio is used). MX-7Bh(RT5677_PLL1_CTRL2) is cleared and won't be restored by regcache since it's volatile. MX-7Bh has one status bit and M code for PLL1. rt5677_set_dai_pll doesn't reconfigure PLL1 after resume because it thinks the PLL params are not changed. This patch clears the cached PLL params at resume so that rt5677_set_dai_pll can reconfigure the PLL after resume. Signed-off-by: Ben Zhang Signed-off-by: Mark Brown --- sound/soc/codecs/rt5677.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index f73fd125e49c..c404f515376e 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -4792,6 +4792,9 @@ static int rt5677_resume(struct snd_soc_codec *codec) struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); if (!rt5677->dsp_vad_en) { + rt5677->pll_src = 0; + rt5677->pll_in = 0; + rt5677->pll_out = 0; gpiod_set_value_cansleep(rt5677->pow_ldo2, 1); gpiod_set_value_cansleep(rt5677->reset_pin, 0); if (rt5677->pow_ldo2 || rt5677->reset_pin) -- 2.20.1