From 1a3adce1c2c83498f0f9285c504b380fb4182d0d Mon Sep 17 00:00:00 2001 From: Jonathan Tinkham Date: Tue, 2 Feb 2016 23:03:44 -0700 Subject: [PATCH] power: bq24735-charger: fix failed i2c with ac-detect When an ac-detect pin exists, but the charger is not plugged in, the chip will not respond to i2c messages, causing the module to fail when inserted. Signed-off-by: Jonathan Tinkham Signed-off-by: Sebastian Reichel --- drivers/power/bq24735-charger.c | 45 ++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 21 deletions(-) diff --git a/drivers/power/bq24735-charger.c b/drivers/power/bq24735-charger.c index 079d1c6c2a8f..022a09ceab73 100644 --- a/drivers/power/bq24735-charger.c +++ b/drivers/power/bq24735-charger.c @@ -381,27 +381,6 @@ static int bq24735_charger_probe(struct i2c_client *client, i2c_set_clientdata(client, charger); - ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID); - if (ret < 0) { - dev_err(&client->dev, "Failed to read manufacturer id : %d\n", - ret); - return ret; - } else if (ret != 0x0040) { - dev_err(&client->dev, - "manufacturer id mismatch. 0x0040 != 0x%04x\n", ret); - return -ENODEV; - } - - ret = bq24735_read_word(client, BQ24735_DEVICE_ID); - if (ret < 0) { - dev_err(&client->dev, "Failed to read device id : %d\n", ret); - return ret; - } else if (ret != 0x000B) { - dev_err(&client->dev, - "device id mismatch. 0x000b != 0x%04x\n", ret); - return -ENODEV; - } - if (gpio_is_valid(charger->pdata->status_gpio)) { ret = devm_gpio_request(&client->dev, charger->pdata->status_gpio, @@ -415,6 +394,30 @@ static int bq24735_charger_probe(struct i2c_client *client, charger->pdata->status_gpio_valid = !ret; } + if (!charger->pdata->status_gpio_valid + || bq24735_charger_is_present(charger)) { + ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID); + if (ret < 0) { + dev_err(&client->dev, "Failed to read manufacturer id : %d\n", + ret); + return ret; + } else if (ret != 0x0040) { + dev_err(&client->dev, + "manufacturer id mismatch. 0x0040 != 0x%04x\n", ret); + return -ENODEV; + } + + ret = bq24735_read_word(client, BQ24735_DEVICE_ID); + if (ret < 0) { + dev_err(&client->dev, "Failed to read device id : %d\n", ret); + return ret; + } else if (ret != 0x000B) { + dev_err(&client->dev, + "device id mismatch. 0x000b != 0x%04x\n", ret); + return -ENODEV; + } + } + ret = bq24735_config_charger(charger); if (ret < 0) { dev_err(&client->dev, "failed in configuring charger"); -- 2.20.1