From 194ec0c07895d8f8bf3ca8e50d5225f7968ad2d0 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:35 +0100 Subject: [PATCH] ide-floppy: remove struct idefloppy_capacity_descriptor Also, - remove the accompanying 4 byte idefloppy_capacity_header. - rename functions from idefloppy_... to ide_floppy_... after cleanup. - simplify loop in ide_floppy_get_capacity() by reversing if-test condition logically. - finally, fix white space and checkpatch.pl issues Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 176 +++++++++++++++++---------------------- 1 file changed, 76 insertions(+), 100 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 5d84fa5f3dc6..28a0bae94e82 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -119,29 +119,7 @@ typedef struct idefloppy_packet_command_s { #define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */ -/* - * Format capacity - */ -typedef struct { - u8 reserved[3]; - u8 length; /* Length of the following descriptors in bytes */ -} idefloppy_capacity_header_t; - -typedef struct { - u32 blocks; /* Number of blocks */ -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned dc :2; /* Descriptor Code */ - unsigned reserved :6; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved :6; - unsigned dc :2; /* Descriptor Code */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 length_msb; /* Block Length (MSB)*/ - u16 length; /* Block Length */ -} idefloppy_capacity_descriptor_t; - +/* format capacities descriptor codes */ #define CAPACITY_INVALID 0x00 #define CAPACITY_UNFORMATTED 0x01 #define CAPACITY_CURRENT 0x02 @@ -184,8 +162,8 @@ typedef struct ide_floppy_obj { */ /* Current format */ int blocks, block_size, bs_factor; - /* Last format capacity */ - idefloppy_capacity_descriptor_t capacity; + /* Last format capacity descriptor */ + u8 cap_desc[8]; /* Copy of the flexible disk page */ u8 flexible_disk_page[32]; /* Write protect */ @@ -1141,17 +1119,17 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive) } /* - * Determine if a media is present in the floppy drive, and if so, - * its LBA capacity. + * Determine if a media is present in the floppy drive, and if so, its LBA + * capacity. */ -static int idefloppy_get_capacity (ide_drive_t *drive) +static int ide_floppy_get_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t pc; - idefloppy_capacity_header_t *header; - idefloppy_capacity_descriptor_t *descriptor; - int i, descriptors, rc = 1, blocks, length; - + u8 *cap_desc; + u8 header_len, desc_cnt; + int i, rc = 1, blocks, length; + drive->bios_cyl = 0; drive->bios_head = drive->bios_sect = 0; floppy->blocks = 0; @@ -1163,17 +1141,26 @@ static int idefloppy_get_capacity (ide_drive_t *drive) printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); return 1; } - header = (idefloppy_capacity_header_t *) pc.buffer; - descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t); - descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); + header_len = pc.buffer[3]; + cap_desc = &pc.buffer[4]; + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ + + for (i = 0; i < desc_cnt; i++) { + unsigned int desc_start = 4 + i*8; + + blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]); + + debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", + i, blocks * length / 1024, blocks, length); - for (i = 0; i < descriptors; i++, descriptor++) { - blocks = descriptor->blocks = be32_to_cpu(descriptor->blocks); - length = descriptor->length = be16_to_cpu(descriptor->length); + if (i) + continue; + /* + * the code below is valid only for the 1st descriptor, ie i=0 + */ - if (!i) - { - switch (descriptor->dc) { + switch (pc.buffer[desc_start + 4] & 0x03) { /* Clik! drive returns this instead of CAPACITY_CURRENT */ case CAPACITY_UNFORMATTED: if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) @@ -1184,23 +1171,25 @@ static int idefloppy_get_capacity (ide_drive_t *drive) break; case CAPACITY_CURRENT: /* Normal Zip/LS-120 disks */ - if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t))) + if (memcmp(cap_desc, &floppy->cap_desc, 8)) printk(KERN_INFO "%s: %dkB, %d blocks, %d " "sector size\n", drive->name, blocks * length / 1024, blocks, length); - floppy->capacity = *descriptor; + memcpy(&floppy->cap_desc, cap_desc, 8); + if (!length || length % 512) { printk(KERN_NOTICE "%s: %d bytes block size " "not supported\n", drive->name, length); } else { - floppy->blocks = blocks; - floppy->block_size = length; - if ((floppy->bs_factor = length / 512) != 1) - printk(KERN_NOTICE "%s: warning: non " + floppy->blocks = blocks; + floppy->block_size = length; + floppy->bs_factor = length / 512; + if (floppy->bs_factor != 1) + printk(KERN_NOTICE "%s: warning: non " "512 bytes block size not " "fully supported\n", drive->name); - rc = 0; + rc = 0; } break; case CAPACITY_NO_CARTRIDGE: @@ -1215,52 +1204,42 @@ static int idefloppy_get_capacity (ide_drive_t *drive) "in drive\n", drive->name); break; } - } - if (!i) { - debug_log("Descriptor 0 Code: %d\n", descriptor->dc); - } - debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", - i, blocks * length / 1024, blocks, length); + debug_log("Descriptor 0 Code: %d\n", + pc.buffer[desc_start + 4] & 0x03); } /* Clik! disk does not support get_flexible_disk_page */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) (void) ide_floppy_get_flexible_disk_page(drive); - } set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor); return rc; } /* -** Obtain the list of formattable capacities. -** Very similar to idefloppy_get_capacity, except that we push the capacity -** descriptors to userland, instead of our own structures. -** -** Userland gives us the following structure: -** -** struct idefloppy_format_capacities { -** int nformats; -** struct { -** int nblocks; -** int blocksize; -** } formats[]; -** } ; -** -** userland initializes nformats to the number of allocated formats[] -** records. On exit we set nformats to the number of records we've -** actually initialized. -** -*/ + * Obtain the list of formattable capacities. + * Very similar to ide_floppy_get_capacity, except that we push the capacity + * descriptors to userland, instead of our own structures. + * + * Userland gives us the following structure: + * + * struct idefloppy_format_capacities { + * int nformats; + * struct { + * int nblocks; + * int blocksize; + * } formats[]; + * }; + * + * userland initializes nformats to the number of allocated formats[] records. + * On exit we set nformats to the number of records we've actually initialized. + */ -static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) +static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) { - idefloppy_pc_t pc; - idefloppy_capacity_header_t *header; - idefloppy_capacity_descriptor_t *descriptor; - int i, descriptors, blocks, length; - int u_array_size; - int u_index; + idefloppy_pc_t pc; + u8 header_len, desc_cnt; + int i, blocks, length, u_array_size, u_index; int __user *argp; if (get_user(u_array_size, arg)) @@ -1272,30 +1251,27 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) idefloppy_create_read_capacity_cmd(&pc); if (idefloppy_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); - return (-EIO); - } - header = (idefloppy_capacity_header_t *) pc.buffer; - descriptors = header->length / - sizeof(idefloppy_capacity_descriptor_t); - descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); + return (-EIO); + } + header_len = pc.buffer[3]; + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ u_index = 0; argp = arg + 1; /* - ** We always skip the first capacity descriptor. That's the - ** current capacity. We are interested in the remaining descriptors, - ** the formattable capacities. - */ + * We always skip the first capacity descriptor. That's the current + * capacity. We are interested in the remaining descriptors, the + * formattable capacities. + */ + for (i = 1; i < desc_cnt; i++) { + unsigned int desc_start = 4 + i*8; - for (i=0; i= u_array_size) break; /* User-supplied buffer too small */ - if (i == 0) - continue; /* Skip the first descriptor */ - blocks = be32_to_cpu(descriptor->blocks); - length = be16_to_cpu(descriptor->length); + blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]); if (put_user(blocks, argp)) return(-EFAULT); @@ -1535,7 +1511,7 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) } - (void) idefloppy_get_capacity(drive); + (void) ide_floppy_get_capacity(drive); idefloppy_add_settings(drive); } @@ -1630,7 +1606,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp) (void) idefloppy_queue_pc_tail(drive, &pc); } - if (idefloppy_get_capacity (drive) + if (ide_floppy_get_capacity(drive) && (filp->f_flags & O_NDELAY) == 0 /* ** Allow O_NDELAY to open a drive without a disk, or with @@ -1734,7 +1710,7 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file, case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED: return 0; case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY: - return idefloppy_get_format_capacities(drive, argp); + return ide_floppy_get_format_capacities(drive, argp); case IDEFLOPPY_IOCTL_FORMAT_START: if (!(file->f_mode & 2)) -- 2.20.1