From 17db9f386632c9c9182a3318b89b742be08c1c2a Mon Sep 17 00:00:00 2001 From: Hans Holmberg Date: Fri, 3 Feb 2017 15:29:12 +0100 Subject: [PATCH] regulator: gpio: correct default type The driver defaults to voltage, not current, type so correct this in the device tree binding documentation. Signed-off-by: Hans Holmberg Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/gpio-regulator.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index e5cac1e0ca8a..dd1ed789728e 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -13,7 +13,7 @@ Optional properties: - startup-delay-us : Startup time in microseconds. - enable-active-high : Polarity of GPIO is active high (default is low). - regulator-type : Specifies what is being regulated, must be either - "voltage" or "current", defaults to current. + "voltage" or "current", defaults to voltage. Any property defined as part of the core regulator binding defined in regulator.txt can also be used. -- 2.20.1