From 169a6303b89a99c807328f6f9772a81605b17116 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Tue, 29 Jul 2014 08:57:37 -0500 Subject: [PATCH] amd-xgbe-phy: Updates to rate change complete check Currently, the logic will loop endlessly waiting for a rate change to complete. Add a counter so that if the rate change signals never indicate complete the loop will eventually exit. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/phy/amd-xgbe-phy.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index b35293da9f87..a2d778aefadf 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -95,6 +95,8 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); #define XNP_MP_FORMATTED (1 << 13) #define XNP_NP_EXCHANGE (1 << 15) +#define XGBE_PHY_RATECHANGE_COUNT 100 + #ifndef MDIO_PMA_10GBR_PMD_CTRL #define MDIO_PMA_10GBR_PMD_CTRL 0x0096 #endif @@ -193,6 +195,16 @@ do { \ (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ } while (0) +#define XSIR_GET_BITS(_var, _prefix, _field) \ + GET_BITS((_var), \ + _prefix##_##_field##_INDEX, \ + _prefix##_##_field##_WIDTH) + +#define XSIR_SET_BITS(_var, _prefix, _field, _val) \ + SET_BITS((_var), \ + _prefix##_##_field##_INDEX, \ + _prefix##_##_field##_WIDTH, (_val)) + /* Macros for reading or writing SerDes integration registers * The ioread macros will get bit fields or full values using the * register definitions formed using the input names @@ -387,14 +399,25 @@ static void amd_xgbe_phy_serdes_start_ratechange(struct phy_device *phydev) static void amd_xgbe_phy_serdes_complete_ratechange(struct phy_device *phydev) { struct amd_xgbe_phy_priv *priv = phydev->priv; + unsigned int wait; + u16 status; /* Release Rx and Tx ratechange */ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 0); /* Wait for Rx and Tx ready */ - while (!XSIR0_IOREAD_BITS(priv, SIR0_STATUS, RX_READY) && - !XSIR0_IOREAD_BITS(priv, SIR0_STATUS, TX_READY)) + wait = XGBE_PHY_RATECHANGE_COUNT; + while (wait--) { usleep_range(10, 20); + + status = XSIR0_IOREAD(priv, SIR0_STATUS); + if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) && + XSIR_GET_BITS(status, SIR0_STATUS, TX_READY)) + return; + } + + netdev_err(phydev->attached_dev, "SerDes rx/tx not ready (%#hx)\n", + status); } static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev) -- 2.20.1