From 16975a79c8e6ee424331f52649f2351d33c7b972 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 8 Dec 2009 18:47:16 -0700 Subject: [PATCH] ARM: OMAP4: PM: Add support for OMAP4 dpll api's Most of the dpll api's from dpll.c are reused for OMAP4. This patch does extend a few api's for OMAP4 support. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley Cc: Benoit Cousson --- arch/arm/mach-omap2/Makefile | 5 +++-- arch/arm/mach-omap2/clock.c | 5 +++++ arch/arm/mach-omap2/clock.h | 6 ++++++ arch/arm/mach-omap2/clock44xx.c | 25 ------------------------- arch/arm/mach-omap2/dpll.c | 28 +++++++++++++++++----------- 5 files changed, 31 insertions(+), 38 deletions(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 551df7272247..10c0539c4b01 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -6,13 +6,14 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o omap-2-3-common = irq.o sdrc.o omap_hwmod.o +omap-3-4-common = dpll.o prcm-common = prcm.o powerdomain.o clock-common = clock.o clock_common_data.o clockdomain.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \ - dpll.o -obj-$(CONFIG_ARCH_OMAP4) += prcm.o clock.o + $(omap-3-4-common) +obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) prcm.o clock.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 5cb2dcb5b23e..61ee23596ea8 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -249,6 +249,11 @@ u32 omap2_get_dpll_rate(struct clk *clk) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return dd->clk_bypass->rate; + } else if (cpu_is_omap44xx()) { + if (v == OMAP4XXX_EN_DPLL_LPBYPASS || + v == OMAP4XXX_EN_DPLL_FRBYPASS || + v == OMAP4XXX_EN_DPLL_MNBYPASS) + return dd->clk_bypass->rate; } v = __raw_readl(dd->mult_div1_reg); diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 4df7aa43ef44..8418f3a22e60 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -36,6 +36,12 @@ #define OMAP3XXX_EN_DPLL_FRBYPASS 0x6 #define OMAP3XXX_EN_DPLL_LOCKED 0x7 +/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */ +#define OMAP4XXX_EN_DPLL_MNBYPASS 0x4 +#define OMAP4XXX_EN_DPLL_LPBYPASS 0x5 +#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 +#define OMAP4XXX_EN_DPLL_LOCKED 0x7 + /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ #define DPLL_LOW_POWER_STOP 0x1 #define DPLL_LOW_POWER_BYPASS 0x5 diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c index 5b25d38d542e..e370868a79a8 100644 --- a/arch/arm/mach-omap2/clock44xx.c +++ b/arch/arm/mach-omap2/clock44xx.c @@ -22,31 +22,6 @@ struct clk_functions omap2_clk_functions = { .clk_disable_unused = omap2_clk_disable_unused, }; -/* - * Dummy functions for DPLL control. Plan is to re-use - * existing OMAP3 dpll control functions. - */ - -unsigned long omap3_dpll_recalc(struct clk *clk) -{ - return 0; -} - -int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} - -int omap3_noncore_dpll_enable(struct clk *clk) -{ - return 0; -} - -void omap3_noncore_dpll_disable(struct clk *clk) -{ - return; -} - const struct clkops clkops_noncore_dpll_ops = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c index a39fe9d8c278..f6055b493294 100644 --- a/arch/arm/mach-omap2/dpll.c +++ b/arch/arm/mach-omap2/dpll.c @@ -26,9 +26,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include @@ -311,10 +311,12 @@ int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) _omap3_noncore_dpll_bypass(clk); /* Set jitter correction */ - v = __raw_readl(dd->control_reg); - v &= ~dd->freqsel_mask; - v |= freqsel << __ffs(dd->freqsel_mask); - __raw_writel(v, dd->control_reg); + if (!cpu_is_omap44xx()) { + v = __raw_readl(dd->control_reg); + v &= ~dd->freqsel_mask; + v |= freqsel << __ffs(dd->freqsel_mask); + __raw_writel(v, dd->control_reg); + } /* Set DPLL multiplier, divider */ v = __raw_readl(dd->mult_div1_reg); @@ -346,7 +348,7 @@ int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) { struct clk *new_parent = NULL; - u16 freqsel; + u16 freqsel = 0; struct dpll_data *dd; int ret; @@ -382,9 +384,13 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) if (dd->last_rounded_rate == 0) return -EINVAL; - freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); - if (!freqsel) - WARN_ON(1); + /* No freqsel on OMAP4 */ + if (!cpu_is_omap44xx()) { + freqsel = _omap3_dpll_compute_freqsel(clk, + dd->last_rounded_n); + if (!freqsel) + WARN_ON(1); + } pr_debug("clock: %s: set rate: locking rate to %lu.\n", clk->name, rate); -- 2.20.1