From 16779622be1c8959d6a665e2b6886bb33885fcb1 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 9 Aug 2017 08:51:27 +1200 Subject: [PATCH] spi: spi-ep93xx: add spi master prepare_transfer_hardware() This driver currently enables the hardware at the start of every message and disabled it when the message is complete. Make it a bit smarter by adding the prepare_transfer_hardware() and unprepare_transfer_hardware() callbacks so that the core can enable/disable the hardware based on spi message queue. Signed-off-by: H Hartley Sweeten [chris: use u32 instead of unsigned int] Signed-off-by: Chris Packham Reviewed-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-ep93xx.c | 72 ++++++++++++++++++---------------------- 1 file changed, 33 insertions(+), 39 deletions(-) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 0bd792020471..ce6ec164f2f2 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -111,33 +111,6 @@ struct ep93xx_spi { /* converts bits per word to CR0.DSS value */ #define bits_per_word_to_dss(bpw) ((bpw) - 1) -static int ep93xx_spi_enable(const struct ep93xx_spi *espi) -{ - u32 val; - int err; - - err = clk_enable(espi->clk); - if (err) - return err; - - val = readl(espi->mmio + SSPCR1); - val |= SSPCR1_SSE; - writel(val, espi->mmio + SSPCR1); - - return 0; -} - -static void ep93xx_spi_disable(const struct ep93xx_spi *espi) -{ - u32 val; - - val = readl(espi->mmio + SSPCR1); - val &= ~SSPCR1_SSE; - writel(val, espi->mmio + SSPCR1); - - clk_disable(espi->clk); -} - static void ep93xx_spi_enable_interrupts(const struct ep93xx_spi *espi) { u32 val; @@ -571,17 +544,6 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi, { unsigned long timeout; struct spi_transfer *t; - int err; - - /* - * Enable the SPI controller and its clock. - */ - err = ep93xx_spi_enable(espi); - if (err) { - dev_err(&espi->pdev->dev, "failed to enable SPI controller\n"); - msg->status = err; - return; - } /* * Just to be sure: flush any data from RX FIFO. @@ -619,7 +581,6 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi, * deselect the device and disable the SPI controller. */ ep93xx_spi_cs_control(msg->spi, false); - ep93xx_spi_disable(espi); } static int ep93xx_spi_transfer_one_message(struct spi_master *master, @@ -679,6 +640,37 @@ static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static int ep93xx_spi_prepare_hardware(struct spi_master *master) +{ + struct ep93xx_spi *espi = spi_master_get_devdata(master); + u32 val; + int ret; + + ret = clk_enable(espi->clk); + if (ret) + return ret; + + val = readl(espi->mmio + SSPCR1); + val |= SSPCR1_SSE; + writel(val, espi->mmio + SSPCR1); + + return 0; +} + +static int ep93xx_spi_unprepare_hardware(struct spi_master *master) +{ + struct ep93xx_spi *espi = spi_master_get_devdata(master); + u32 val; + + val = readl(espi->mmio + SSPCR1); + val &= ~SSPCR1_SSE; + writel(val, espi->mmio + SSPCR1); + + clk_disable(espi->clk); + + return 0; +} + static bool ep93xx_spi_dma_filter(struct dma_chan *chan, void *filter_param) { if (ep93xx_dma_chan_is_m2p(chan)) @@ -780,6 +772,8 @@ static int ep93xx_spi_probe(struct platform_device *pdev) if (!master) return -ENOMEM; + master->prepare_transfer_hardware = ep93xx_spi_prepare_hardware; + master->unprepare_transfer_hardware = ep93xx_spi_unprepare_hardware; master->transfer_one_message = ep93xx_spi_transfer_one_message; master->bus_num = pdev->id; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; -- 2.20.1