From 15bf176db1fb00333af7050c0c699fc7b4e4a960 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Fri, 23 Oct 2015 11:41:59 +0300 Subject: [PATCH] gianfar: Don't enable the Filer w/o the Parser Under one unusual circumstance it's possible to wrongly set FILREN without enabling PRSDEP as well in the RCTRL register, against the hardware specifications. With the default config this does not happen because the default Rx offloads (Rx csum and Rx VLAN) properly enable PRSDEP. But if anyone disables all these offloads (via ethtool), we get a wrong configuration were the Rx flow classification and hashing, and other Filer based features (e.g. wake-on-filer interrupt) won't work. This patch fixes the issue. Also, account for Rx FCB insertion which happens every time PRSDEP is set. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 710715fcb23d..939ed8fe6318 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -341,7 +341,7 @@ static void gfar_rx_offload_en(struct gfar_private *priv) if (priv->ndev->features & (NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX)) priv->uses_rxfcb = 1; - if (priv->hwts_rx_en) + if (priv->hwts_rx_en || priv->rx_filer_enable) priv->uses_rxfcb = 1; } @@ -351,7 +351,7 @@ static void gfar_mac_rx_config(struct gfar_private *priv) u32 rctrl = 0; if (priv->rx_filer_enable) { - rctrl |= RCTRL_FILREN; + rctrl |= RCTRL_FILREN | RCTRL_PRSDEP_INIT; /* Program the RIR0 reg with the required distribution */ if (priv->poll_mode == GFAR_SQ_POLLING) gfar_write(®s->rir0, DEFAULT_2RXQ_RIR0); -- 2.20.1