From 14f0413ce3c400a74213a861bc8f47dca5e4d231 Mon Sep 17 00:00:00 2001 From: Howard Mitchell Date: Mon, 23 Mar 2015 21:17:01 +0000 Subject: [PATCH] ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4 Currently GPIO4 is hardcoded to output the pll-lock signal. Unfortunately this is after the pll-out GPIO is configured which is selectable in the device tree. Therefore it is not possible to use GPIO4 for pll-out. Therefore this patch removes the configuration of GPIO4. Signed-off-by: Howard Mitchell Signed-off-by: Mark Brown --- sound/soc/codecs/pcm512x.c | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c index 9974f201a08f..474cae82a874 100644 --- a/sound/soc/codecs/pcm512x.c +++ b/sound/soc/codecs/pcm512x.c @@ -1156,25 +1156,6 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream, ret, pcm512x->pll_out); return ret; } - - gpio = PCM512x_G1OE << (4 - 1); - ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_EN, - gpio, gpio); - if (ret != 0) { - dev_err(codec->dev, "Failed to enable gpio %d: %d\n", - 4, ret); - return ret; - } - - gpio = PCM512x_GPIO_OUTPUT_1 + 4 - 1; - ret = regmap_update_bits(pcm512x->regmap, gpio, - PCM512x_GxSL, PCM512x_GxSL_PLLLK); - if (ret != 0) { - dev_err(codec->dev, - "Failed to output pll lock on %d: %d\n", - ret, 4); - return ret; - } } ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE, -- 2.20.1