From 14e8015f8569d9634479a4a461e7c138d60d99ca Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 30 Jun 2016 03:48:49 +0200 Subject: [PATCH] iio: pressure: bmp280: split driver in logical parts This splits the BMP280 driver in three logical parts: the core driver bmp280-core that only operated on a struct device * and a struct regmap *, the regmap driver bmp280-regmap that can be shared between I2C and other transports and the I2C module driver bmp280-i2c. Cleverly bake all functionality into a single object bmp280.o so that we still get the same module binary built for the device in the end, without any fuzz exporting symbols to the left and right. Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/Makefile | 1 + .../iio/pressure/{bmp280.c => bmp280-core.c} | 311 +++--------------- drivers/iio/pressure/bmp280-i2c.c | 89 +++++ drivers/iio/pressure/bmp280-regmap.c | 81 +++++ drivers/iio/pressure/bmp280.h | 108 ++++++ 5 files changed, 318 insertions(+), 272 deletions(-) rename drivers/iio/pressure/{bmp280.c => bmp280-core.c} (73%) create mode 100644 drivers/iio/pressure/bmp280-i2c.c create mode 100644 drivers/iio/pressure/bmp280-regmap.c create mode 100644 drivers/iio/pressure/bmp280.h diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 17d6e7afa1ff..2d98a7ff77a8 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -4,6 +4,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMP280) += bmp280.o +bmp280-objs := bmp280-core.o bmp280-regmap.o bmp280-i2c.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o obj-$(CONFIG_HP03) += hp03.o obj-$(CONFIG_MPL115) += mpl115.o diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280-core.c similarity index 73% rename from drivers/iio/pressure/bmp280.c rename to drivers/iio/pressure/bmp280-core.c index f5d0875d88e9..83b96fe71f3b 100644 --- a/drivers/iio/pressure/bmp280.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -15,10 +15,7 @@ #define pr_fmt(fmt) "bmp280: " fmt -#include -#include -#include -#include +#include #include #include #include @@ -26,102 +23,10 @@ #include #include -/* BMP280 specific registers */ -#define BMP280_REG_HUMIDITY_LSB 0xFE -#define BMP280_REG_HUMIDITY_MSB 0xFD -#define BMP280_REG_TEMP_XLSB 0xFC -#define BMP280_REG_TEMP_LSB 0xFB -#define BMP280_REG_TEMP_MSB 0xFA -#define BMP280_REG_PRESS_XLSB 0xF9 -#define BMP280_REG_PRESS_LSB 0xF8 -#define BMP280_REG_PRESS_MSB 0xF7 - -#define BMP280_REG_CONFIG 0xF5 -#define BMP280_REG_CTRL_MEAS 0xF4 -#define BMP280_REG_STATUS 0xF3 -#define BMP280_REG_CTRL_HUMIDITY 0xF2 - -/* Due to non linear mapping, and data sizes we can't do a bulk read */ -#define BMP280_REG_COMP_H1 0xA1 -#define BMP280_REG_COMP_H2 0xE1 -#define BMP280_REG_COMP_H3 0xE3 -#define BMP280_REG_COMP_H4 0xE4 -#define BMP280_REG_COMP_H5 0xE5 -#define BMP280_REG_COMP_H6 0xE7 - -#define BMP280_REG_COMP_TEMP_START 0x88 -#define BMP280_COMP_TEMP_REG_COUNT 6 - -#define BMP280_REG_COMP_PRESS_START 0x8E -#define BMP280_COMP_PRESS_REG_COUNT 18 - -#define BMP280_FILTER_MASK (BIT(4) | BIT(3) | BIT(2)) -#define BMP280_FILTER_OFF 0 -#define BMP280_FILTER_2X BIT(2) -#define BMP280_FILTER_4X BIT(3) -#define BMP280_FILTER_8X (BIT(3) | BIT(2)) -#define BMP280_FILTER_16X BIT(4) - -#define BMP280_OSRS_HUMIDITY_MASK (BIT(2) | BIT(1) | BIT(0)) -#define BMP280_OSRS_HUMIDITIY_X(osrs_h) ((osrs_h) << 0) -#define BMP280_OSRS_HUMIDITY_SKIP 0 -#define BMP280_OSRS_HUMIDITY_1X BMP280_OSRS_HUMIDITIY_X(1) -#define BMP280_OSRS_HUMIDITY_2X BMP280_OSRS_HUMIDITIY_X(2) -#define BMP280_OSRS_HUMIDITY_4X BMP280_OSRS_HUMIDITIY_X(3) -#define BMP280_OSRS_HUMIDITY_8X BMP280_OSRS_HUMIDITIY_X(4) -#define BMP280_OSRS_HUMIDITY_16X BMP280_OSRS_HUMIDITIY_X(5) - -#define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5)) -#define BMP280_OSRS_TEMP_SKIP 0 -#define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5) -#define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1) -#define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2) -#define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3) -#define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4) -#define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5) - -#define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2)) -#define BMP280_OSRS_PRESS_SKIP 0 -#define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2) -#define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1) -#define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2) -#define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3) -#define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4) -#define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5) - -#define BMP280_MODE_MASK (BIT(1) | BIT(0)) -#define BMP280_MODE_SLEEP 0 -#define BMP280_MODE_FORCED BIT(0) -#define BMP280_MODE_NORMAL (BIT(1) | BIT(0)) - -/* BMP180 specific registers */ -#define BMP180_REG_OUT_XLSB 0xF8 -#define BMP180_REG_OUT_LSB 0xF7 -#define BMP180_REG_OUT_MSB 0xF6 - -#define BMP180_REG_CALIB_START 0xAA -#define BMP180_REG_CALIB_COUNT 22 - -#define BMP180_MEAS_SCO BIT(5) -#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO) -#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO) -#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0) -#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1) -#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2) -#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3) - -/* BMP180 and BMP280 common registers */ -#define BMP280_REG_CTRL_MEAS 0xF4 -#define BMP280_REG_RESET 0xE0 -#define BMP280_REG_ID 0xD0 - -#define BMP180_CHIP_ID 0x55 -#define BMP280_CHIP_ID 0x58 -#define BME280_CHIP_ID 0x60 -#define BMP280_SOFT_RESET_VAL 0xB6 +#include "bmp280.h" struct bmp280_data { - struct i2c_client *client; + struct device *dev; struct mutex lock; struct regmap *regmap; const struct bmp280_chip_info *chip_info; @@ -142,8 +47,6 @@ struct bmp280_data { }; struct bmp280_chip_info { - const struct regmap_config *regmap_config; - const int *oversampling_temp_avail; int num_oversampling_temp_avail; @@ -184,48 +87,6 @@ static const struct iio_chan_spec bmp280_channels[] = { }, }; -static bool bmp280_is_writeable_reg(struct device *dev, unsigned int reg) -{ - switch (reg) { - case BMP280_REG_CONFIG: - case BMP280_REG_CTRL_HUMIDITY: - case BMP280_REG_CTRL_MEAS: - case BMP280_REG_RESET: - return true; - default: - return false; - }; -} - -static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg) -{ - switch (reg) { - case BMP280_REG_HUMIDITY_LSB: - case BMP280_REG_HUMIDITY_MSB: - case BMP280_REG_TEMP_XLSB: - case BMP280_REG_TEMP_LSB: - case BMP280_REG_TEMP_MSB: - case BMP280_REG_PRESS_XLSB: - case BMP280_REG_PRESS_LSB: - case BMP280_REG_PRESS_MSB: - case BMP280_REG_STATUS: - return true; - default: - return false; - } -} - -static const struct regmap_config bmp280_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - - .max_register = BMP280_REG_HUMIDITY_LSB, - .cache_type = REGCACHE_RBTREE, - - .writeable_reg = bmp280_is_writeable_reg, - .volatile_reg = bmp280_is_volatile_reg, -}; - /* * Returns humidity in percent, resolution is 0.01 percent. Output value of * "47445" represents 47445/1024 = 46.333 %RH. @@ -236,7 +97,7 @@ static const struct regmap_config bmp280_regmap_config = { static u32 bmp280_compensate_humidity(struct bmp280_data *data, s32 adc_humidity) { - struct device *dev = &data->client->dev; + struct device *dev = data->dev; unsigned int H1, H3, tmp; int H2, H4, H5, H6, ret, var; @@ -307,7 +168,7 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data, ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START, buf, BMP280_COMP_TEMP_REG_COUNT); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "failed to read temperature calibration parameters\n"); return ret; } @@ -347,7 +208,7 @@ static u32 bmp280_compensate_press(struct bmp280_data *data, ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START, buf, BMP280_COMP_PRESS_REG_COUNT); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "failed to read pressure calibration parameters\n"); return ret; } @@ -382,7 +243,7 @@ static int bmp280_read_temp(struct bmp280_data *data, ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, (u8 *) &tmp, 3); if (ret < 0) { - dev_err(&data->client->dev, "failed to read temperature\n"); + dev_err(data->dev, "failed to read temperature\n"); return ret; } @@ -417,7 +278,7 @@ static int bmp280_read_press(struct bmp280_data *data, ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, (u8 *) &tmp, 3); if (ret < 0) { - dev_err(&data->client->dev, "failed to read pressure\n"); + dev_err(data->dev, "failed to read pressure\n"); return ret; } @@ -445,7 +306,7 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, (u8 *) &tmp, 2); if (ret < 0) { - dev_err(&data->client->dev, "failed to read humidity\n"); + dev_err(data->dev, "failed to read humidity\n"); return ret; } @@ -663,7 +524,7 @@ static int bmp280_chip_config(struct bmp280_data *data) BMP280_MODE_MASK, osrs | BMP280_MODE_NORMAL); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "failed to write ctrl_meas register\n"); return ret; } @@ -672,7 +533,7 @@ static int bmp280_chip_config(struct bmp280_data *data) BMP280_FILTER_MASK, BMP280_FILTER_4X); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "failed to write config register\n"); return ret; } @@ -683,8 +544,6 @@ static int bmp280_chip_config(struct bmp280_data *data) static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; static const struct bmp280_chip_info bmp280_chip_info = { - .regmap_config = &bmp280_regmap_config, - .oversampling_temp_avail = bmp280_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), @@ -709,8 +568,6 @@ static int bme280_chip_config(struct bmp280_data *data) } static const struct bmp280_chip_info bme280_chip_info = { - .regmap_config = &bmp280_regmap_config, - .oversampling_temp_avail = bmp280_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), @@ -726,42 +583,6 @@ static const struct bmp280_chip_info bme280_chip_info = { .read_humid = bmp280_read_humid, }; - -static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg) -{ - switch (reg) { - case BMP280_REG_CTRL_MEAS: - case BMP280_REG_RESET: - return true; - default: - return false; - }; -} - -static bool bmp180_is_volatile_reg(struct device *dev, unsigned int reg) -{ - switch (reg) { - case BMP180_REG_OUT_XLSB: - case BMP180_REG_OUT_LSB: - case BMP180_REG_OUT_MSB: - case BMP280_REG_CTRL_MEAS: - return true; - default: - return false; - } -} - -static const struct regmap_config bmp180_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - - .max_register = BMP180_REG_OUT_XLSB, - .cache_type = REGCACHE_RBTREE, - - .writeable_reg = bmp180_is_writeable_reg, - .volatile_reg = bmp180_is_volatile_reg, -}; - static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) { int ret; @@ -877,7 +698,7 @@ static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp) ret = bmp180_read_calib(data, &calib); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "failed to read calibration coefficients\n"); return ret; } @@ -947,7 +768,7 @@ static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press) ret = bmp180_read_calib(data, &calib); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "failed to read calibration coefficients\n"); return ret; } @@ -1007,8 +828,6 @@ static const int bmp180_oversampling_temp_avail[] = { 1 }; static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; static const struct bmp280_chip_info bmp180_chip_info = { - .regmap_config = &bmp180_regmap_config, - .oversampling_temp_avail = bmp180_oversampling_temp_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp180_oversampling_temp_avail), @@ -1022,8 +841,10 @@ static const struct bmp280_chip_info bmp180_chip_info = { .read_press = bmp180_read_press, }; -static int bmp280_probe(struct i2c_client *client, - const struct i2c_device_id *id) +int bmp280_common_probe(struct device *dev, + struct regmap *regmap, + unsigned int chip, + const char *name) { int ret; struct iio_dev *indio_dev; @@ -1031,21 +852,21 @@ static int bmp280_probe(struct i2c_client *client, unsigned int chip_id; struct gpio_desc *gpiod; - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); mutex_init(&data->lock); - data->client = client; + data->dev = dev; - indio_dev->dev.parent = &client->dev; - indio_dev->name = id->name; + indio_dev->dev.parent = dev; + indio_dev->name = name; indio_dev->channels = bmp280_channels; indio_dev->info = &bmp280_info; indio_dev->modes = INDIO_DIRECT_MODE; - switch (id->driver_data) { + switch (chip) { case BMP180_CHIP_ID: indio_dev->num_channels = 2; data->chip_info = &bmp180_chip_info; @@ -1073,52 +894,45 @@ static int bmp280_probe(struct i2c_client *client, } /* Bring up regulators */ - data->vddd = devm_regulator_get(&client->dev, "vddd"); + data->vddd = devm_regulator_get(dev, "vddd"); if (IS_ERR(data->vddd)) { - dev_err(&client->dev, "failed to get VDDD regulator\n"); + dev_err(dev, "failed to get VDDD regulator\n"); return PTR_ERR(data->vddd); } ret = regulator_enable(data->vddd); if (ret) { - dev_err(&client->dev, "failed to enable VDDD regulator\n"); + dev_err(dev, "failed to enable VDDD regulator\n"); return ret; } - data->vdda = devm_regulator_get(&client->dev, "vdda"); + data->vdda = devm_regulator_get(dev, "vdda"); if (IS_ERR(data->vdda)) { - dev_err(&client->dev, "failed to get VDDA regulator\n"); + dev_err(dev, "failed to get VDDA regulator\n"); ret = PTR_ERR(data->vddd); goto out_disable_vddd; } ret = regulator_enable(data->vdda); if (ret) { - dev_err(&client->dev, "failed to enable VDDA regulator\n"); + dev_err(dev, "failed to enable VDDA regulator\n"); goto out_disable_vddd; } /* Wait to make sure we started up properly */ mdelay(data->start_up_time); /* Bring chip out of reset if there is an assigned GPIO line */ - gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH); + gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); /* Deassert the signal */ if (!IS_ERR(gpiod)) { - dev_info(&client->dev, "release reset\n"); + dev_info(dev, "release reset\n"); gpiod_set_value(gpiod, 0); } - data->regmap = devm_regmap_init_i2c(client, - data->chip_info->regmap_config); - if (IS_ERR(data->regmap)) { - dev_err(&client->dev, "failed to allocate register map\n"); - ret = PTR_ERR(data->regmap); - goto out_disable_vdda; - } - - ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id); + data->regmap = regmap; + ret = regmap_read(regmap, BMP280_REG_ID, &chip_id); if (ret < 0) - return ret; - if (chip_id != id->driver_data) { - dev_err(&client->dev, "bad chip id. expected %lx got %x\n", - id->driver_data, chip_id); + goto out_disable_vdda; + if (chip_id != chip) { + dev_err(dev, "bad chip id: expected %x got %x\n", + chip, chip_id); ret = -EINVAL; goto out_disable_vdda; } @@ -1127,7 +941,7 @@ static int bmp280_probe(struct i2c_client *client, if (ret < 0) goto out_disable_vdda; - i2c_set_clientdata(client, indio_dev); + dev_set_drvdata(dev, indio_dev); ret = iio_device_register(indio_dev); if (ret) @@ -1142,9 +956,9 @@ out_disable_vddd: return ret; } -static int bmp280_remove(struct i2c_client *client) +int bmp280_common_remove(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmp280_data *data = iio_priv(indio_dev); iio_device_unregister(indio_dev); @@ -1152,50 +966,3 @@ static int bmp280_remove(struct i2c_client *client) regulator_disable(data->vddd); return 0; } - -static const struct acpi_device_id bmp280_acpi_match[] = { - {"BMP0280", BMP280_CHIP_ID }, - {"BMP0180", BMP180_CHIP_ID }, - {"BMP0085", BMP180_CHIP_ID }, - {"BME0280", BME280_CHIP_ID }, - { }, -}; -MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match); - -#ifdef CONFIG_OF -static const struct of_device_id bmp280_of_match[] = { - { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID }, - { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID }, - { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID }, - { .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID }, - { }, -}; -MODULE_DEVICE_TABLE(of, bmp280_of_match); -#else -#define bmp280_of_match NULL -#endif - -static const struct i2c_device_id bmp280_id[] = { - {"bmp280", BMP280_CHIP_ID }, - {"bmp180", BMP180_CHIP_ID }, - {"bmp085", BMP180_CHIP_ID }, - {"bme280", BME280_CHIP_ID }, - { }, -}; -MODULE_DEVICE_TABLE(i2c, bmp280_id); - -static struct i2c_driver bmp280_driver = { - .driver = { - .name = "bmp280", - .acpi_match_table = ACPI_PTR(bmp280_acpi_match), - .of_match_table = of_match_ptr(bmp280_of_match), - }, - .probe = bmp280_probe, - .remove = bmp280_remove, - .id_table = bmp280_id, -}; -module_i2c_driver(bmp280_driver); - -MODULE_AUTHOR("Vlad Dogaru "); -MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c new file mode 100644 index 000000000000..7c70ee172bba --- /dev/null +++ b/drivers/iio/pressure/bmp280-i2c.c @@ -0,0 +1,89 @@ +#include +#include +#include +#include +#include + +#include "bmp280.h" + +static int bmp280_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const struct regmap_config *regmap_config; + + switch (id->driver_data) { + case BMP180_CHIP_ID: + regmap_config = &bmp180_regmap_config; + break; + case BMP280_CHIP_ID: + case BME280_CHIP_ID: + regmap_config = &bmp280_regmap_config; + break; + default: + return -EINVAL; + } + + regmap = devm_regmap_init_i2c(client, regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "failed to allocate register map\n"); + return PTR_ERR(regmap); + } + + return bmp280_common_probe(&client->dev, + regmap, + id->driver_data, + id->name); +} + +static int bmp280_i2c_remove(struct i2c_client *client) +{ + return bmp280_common_remove(&client->dev); +} + +static const struct acpi_device_id bmp280_acpi_i2c_match[] = { + {"BMP0280", BMP280_CHIP_ID }, + {"BMP0180", BMP180_CHIP_ID }, + {"BMP0085", BMP180_CHIP_ID }, + {"BME0280", BME280_CHIP_ID }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, bmp280_acpi_i2c_match); + +#ifdef CONFIG_OF +static const struct of_device_id bmp280_of_i2c_match[] = { + { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID }, + { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID }, + { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID }, + { .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID }, + { }, +}; +MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match); +#else +#define bmp280_of_i2c_match NULL +#endif + +static const struct i2c_device_id bmp280_i2c_id[] = { + {"bmp280", BMP280_CHIP_ID }, + {"bmp180", BMP180_CHIP_ID }, + {"bmp085", BMP180_CHIP_ID }, + {"bme280", BME280_CHIP_ID }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id); + +static struct i2c_driver bmp280_i2c_driver = { + .driver = { + .name = "bmp280", + .acpi_match_table = ACPI_PTR(bmp280_acpi_i2c_match), + .of_match_table = of_match_ptr(bmp280_of_i2c_match), + }, + .probe = bmp280_i2c_probe, + .remove = bmp280_i2c_remove, + .id_table = bmp280_i2c_id, +}; +module_i2c_driver(bmp280_i2c_driver); + +MODULE_AUTHOR("Vlad Dogaru "); +MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/bmp280-regmap.c b/drivers/iio/pressure/bmp280-regmap.c new file mode 100644 index 000000000000..3341189d0975 --- /dev/null +++ b/drivers/iio/pressure/bmp280-regmap.c @@ -0,0 +1,81 @@ +#include +#include + +#include "bmp280.h" + +static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP280_REG_CTRL_MEAS: + case BMP280_REG_RESET: + return true; + default: + return false; + }; +} + +static bool bmp180_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP180_REG_OUT_XLSB: + case BMP180_REG_OUT_LSB: + case BMP180_REG_OUT_MSB: + case BMP280_REG_CTRL_MEAS: + return true; + default: + return false; + } +} + +const struct regmap_config bmp180_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP180_REG_OUT_XLSB, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp180_is_writeable_reg, + .volatile_reg = bmp180_is_volatile_reg, +}; + +static bool bmp280_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP280_REG_CONFIG: + case BMP280_REG_CTRL_HUMIDITY: + case BMP280_REG_CTRL_MEAS: + case BMP280_REG_RESET: + return true; + default: + return false; + }; +} + +static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP280_REG_HUMIDITY_LSB: + case BMP280_REG_HUMIDITY_MSB: + case BMP280_REG_TEMP_XLSB: + case BMP280_REG_TEMP_LSB: + case BMP280_REG_TEMP_MSB: + case BMP280_REG_PRESS_XLSB: + case BMP280_REG_PRESS_LSB: + case BMP280_REG_PRESS_MSB: + case BMP280_REG_STATUS: + return true; + default: + return false; + } +} + +const struct regmap_config bmp280_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP280_REG_HUMIDITY_LSB, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp280_is_writeable_reg, + .volatile_reg = bmp280_is_volatile_reg, +}; diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h new file mode 100644 index 000000000000..b9fc28ce9428 --- /dev/null +++ b/drivers/iio/pressure/bmp280.h @@ -0,0 +1,108 @@ +#include +#include +#include + +/* BMP280 specific registers */ +#define BMP280_REG_HUMIDITY_LSB 0xFE +#define BMP280_REG_HUMIDITY_MSB 0xFD +#define BMP280_REG_TEMP_XLSB 0xFC +#define BMP280_REG_TEMP_LSB 0xFB +#define BMP280_REG_TEMP_MSB 0xFA +#define BMP280_REG_PRESS_XLSB 0xF9 +#define BMP280_REG_PRESS_LSB 0xF8 +#define BMP280_REG_PRESS_MSB 0xF7 + +#define BMP280_REG_CONFIG 0xF5 +#define BMP280_REG_CTRL_MEAS 0xF4 +#define BMP280_REG_STATUS 0xF3 +#define BMP280_REG_CTRL_HUMIDITY 0xF2 + +/* Due to non linear mapping, and data sizes we can't do a bulk read */ +#define BMP280_REG_COMP_H1 0xA1 +#define BMP280_REG_COMP_H2 0xE1 +#define BMP280_REG_COMP_H3 0xE3 +#define BMP280_REG_COMP_H4 0xE4 +#define BMP280_REG_COMP_H5 0xE5 +#define BMP280_REG_COMP_H6 0xE7 + +#define BMP280_REG_COMP_TEMP_START 0x88 +#define BMP280_COMP_TEMP_REG_COUNT 6 + +#define BMP280_REG_COMP_PRESS_START 0x8E +#define BMP280_COMP_PRESS_REG_COUNT 18 + +#define BMP280_FILTER_MASK (BIT(4) | BIT(3) | BIT(2)) +#define BMP280_FILTER_OFF 0 +#define BMP280_FILTER_2X BIT(2) +#define BMP280_FILTER_4X BIT(3) +#define BMP280_FILTER_8X (BIT(3) | BIT(2)) +#define BMP280_FILTER_16X BIT(4) + +#define BMP280_OSRS_HUMIDITY_MASK (BIT(2) | BIT(1) | BIT(0)) +#define BMP280_OSRS_HUMIDITIY_X(osrs_h) ((osrs_h) << 0) +#define BMP280_OSRS_HUMIDITY_SKIP 0 +#define BMP280_OSRS_HUMIDITY_1X BMP280_OSRS_HUMIDITIY_X(1) +#define BMP280_OSRS_HUMIDITY_2X BMP280_OSRS_HUMIDITIY_X(2) +#define BMP280_OSRS_HUMIDITY_4X BMP280_OSRS_HUMIDITIY_X(3) +#define BMP280_OSRS_HUMIDITY_8X BMP280_OSRS_HUMIDITIY_X(4) +#define BMP280_OSRS_HUMIDITY_16X BMP280_OSRS_HUMIDITIY_X(5) + +#define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5)) +#define BMP280_OSRS_TEMP_SKIP 0 +#define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5) +#define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1) +#define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2) +#define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3) +#define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4) +#define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5) + +#define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2)) +#define BMP280_OSRS_PRESS_SKIP 0 +#define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2) +#define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1) +#define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2) +#define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3) +#define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4) +#define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5) + +#define BMP280_MODE_MASK (BIT(1) | BIT(0)) +#define BMP280_MODE_SLEEP 0 +#define BMP280_MODE_FORCED BIT(0) +#define BMP280_MODE_NORMAL (BIT(1) | BIT(0)) + +/* BMP180 specific registers */ +#define BMP180_REG_OUT_XLSB 0xF8 +#define BMP180_REG_OUT_LSB 0xF7 +#define BMP180_REG_OUT_MSB 0xF6 + +#define BMP180_REG_CALIB_START 0xAA +#define BMP180_REG_CALIB_COUNT 22 + +#define BMP180_MEAS_SCO BIT(5) +#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO) +#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO) +#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0) +#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1) +#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2) +#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3) + +/* BMP180 and BMP280 common registers */ +#define BMP280_REG_CTRL_MEAS 0xF4 +#define BMP280_REG_RESET 0xE0 +#define BMP280_REG_ID 0xD0 + +#define BMP180_CHIP_ID 0x55 +#define BMP280_CHIP_ID 0x58 +#define BME280_CHIP_ID 0x60 +#define BMP280_SOFT_RESET_VAL 0xB6 + +/* Regmap configurations */ +extern const struct regmap_config bmp180_regmap_config; +extern const struct regmap_config bmp280_regmap_config; + +/* Probe called from different transports */ +int bmp280_common_probe(struct device *dev, + struct regmap *regmap, + unsigned int chip, + const char *name); +int bmp280_common_remove(struct device *dev); -- 2.20.1