From 14da699bc04212559d5dda19d3f07c807fb58dfd Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 6 Mar 2014 16:38:37 +0200 Subject: [PATCH] phy: rename struct omap_control_usb to struct omap_control_phy Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Acked-by: Felipe Balbi --- drivers/phy/Kconfig | 14 +- drivers/phy/Makefile | 1 + drivers/{usb => }/phy/phy-omap-control.c | 165 +++++++++--------- drivers/phy/phy-omap-usb2.c | 8 +- drivers/phy/phy-ti-pipe3.c | 8 +- drivers/usb/musb/omap2430.c | 2 +- drivers/usb/phy/Kconfig | 10 -- drivers/usb/phy/Makefile | 1 - .../omap_control_phy.h} | 36 ++-- 9 files changed, 123 insertions(+), 122 deletions(-) rename drivers/{usb => }/phy/phy-omap-control.c (55%) rename include/linux/{usb/omap_control_usb.h => phy/omap_control_phy.h} (68%) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 1b607d7cb03d..fe8c0096f9e4 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -31,12 +31,22 @@ config PHY_MVEBU_SATA depends on OF select GENERIC_PHY +config OMAP_CONTROL_PHY + tristate "OMAP CONTROL PHY Driver" + help + Enable this to add support for the PHY part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY/SATA PHY/PCIE PHY + (PIPE3 PHY). + config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS depends on USB_PHY select GENERIC_PHY - select OMAP_CONTROL_USB + select OMAP_CONTROL_PHY help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. @@ -47,7 +57,7 @@ config TI_PIPE3 tristate "TI PIPE3 PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST select GENERIC_PHY - select OMAP_CONTROL_USB + select OMAP_CONTROL_PHY help Enable this to support the PIPE3 PHY that is part of TI SOCs. This driver takes care of all the PHY functionality apart from comparator. diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index ecf0d3f5bf1d..8da05a841112 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c similarity index 55% rename from drivers/usb/phy/phy-omap-control.c rename to drivers/phy/phy-omap-control.c index e7253182e47d..17fc200210c8 100644 --- a/drivers/usb/phy/phy-omap-control.c +++ b/drivers/phy/phy-omap-control.c @@ -1,5 +1,5 @@ /* - * omap-control-usb.c - The USB part of control module. + * omap-control-phy.c - The PHY part of control module. * * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com * This program is free software; you can redistribute it and/or modify @@ -24,36 +24,36 @@ #include #include #include -#include +#include /** - * omap_control_usb_phy_power - power on/off the phy using control module reg + * omap_control_phy_power - power on/off the phy using control module reg * @dev: the control module device * @on: 0 or 1, based on powering on or off the PHY */ -void omap_control_usb_phy_power(struct device *dev, int on) +void omap_control_phy_power(struct device *dev, int on) { u32 val; unsigned long rate; - struct omap_control_usb *control_usb; + struct omap_control_phy *control_phy; if (IS_ERR(dev) || !dev) { pr_err("%s: invalid device\n", __func__); return; } - control_usb = dev_get_drvdata(dev); - if (!control_usb) { - dev_err(dev, "%s: invalid control usb device\n", __func__); + control_phy = dev_get_drvdata(dev); + if (!control_phy) { + dev_err(dev, "%s: invalid control phy device\n", __func__); return; } - if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) return; - val = readl(control_usb->power); + val = readl(control_phy->power); - switch (control_usb->type) { + switch (control_phy->type) { case OMAP_CTRL_TYPE_USB2: if (on) val &= ~OMAP_CTRL_DEV_PHY_PD; @@ -62,19 +62,20 @@ void omap_control_usb_phy_power(struct device *dev, int on) break; case OMAP_CTRL_TYPE_PIPE3: - rate = clk_get_rate(control_usb->sys_clk); + rate = clk_get_rate(control_phy->sys_clk); rate = rate/1000000; if (on) { - val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; + val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + val |= rate << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; } else { - val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; } break; @@ -100,66 +101,66 @@ void omap_control_usb_phy_power(struct device *dev, int on) break; default: dev_err(dev, "%s: type %d not recognized\n", - __func__, control_usb->type); + __func__, control_phy->type); break; } - writel(val, control_usb->power); + writel(val, control_phy->power); } -EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); +EXPORT_SYMBOL_GPL(omap_control_phy_power); /** * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded - * @ctrl_usb: struct omap_control_usb * + * @ctrl_phy: struct omap_control_phy * * * Writes to the mailbox register to notify the usb core that a usb * device has been connected. */ -static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb) +static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy) { u32 val; - val = readl(ctrl_usb->otghs_control); + val = readl(ctrl_phy->otghs_control); val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); + writel(val, ctrl_phy->otghs_control); } /** * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high * impedance - * @ctrl_usb: struct omap_control_usb * + * @ctrl_phy: struct omap_control_phy * * * Writes to the mailbox register to notify the usb core that it has been * connected to a usb host. */ -static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb) +static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy) { u32 val; - val = readl(ctrl_usb->otghs_control); + val = readl(ctrl_phy->otghs_control); val &= ~OMAP_CTRL_DEV_SESSEND; val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); + writel(val, ctrl_phy->otghs_control); } /** * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high * impedance - * @ctrl_usb: struct omap_control_usb * + * @ctrl_phy: struct omap_control_phy * * * Writes to the mailbox register to notify the usb core it's now in * disconnected state. */ -static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) +static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy) { u32 val; - val = readl(ctrl_usb->otghs_control); + val = readl(ctrl_phy->otghs_control); val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; - writel(val, ctrl_usb->otghs_control); + writel(val, ctrl_phy->otghs_control); } /** @@ -174,30 +175,30 @@ static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) void omap_control_usb_set_mode(struct device *dev, enum omap_control_usb_mode mode) { - struct omap_control_usb *ctrl_usb; + struct omap_control_phy *ctrl_phy; if (IS_ERR(dev) || !dev) return; - ctrl_usb = dev_get_drvdata(dev); + ctrl_phy = dev_get_drvdata(dev); - if (!ctrl_usb) { - dev_err(dev, "Invalid control usb device\n"); + if (!ctrl_phy) { + dev_err(dev, "Invalid control phy device\n"); return; } - if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS) + if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS) return; switch (mode) { case USB_MODE_HOST: - omap_control_usb_host_mode(ctrl_usb); + omap_control_usb_host_mode(ctrl_phy); break; case USB_MODE_DEVICE: - omap_control_usb_device_mode(ctrl_usb); + omap_control_usb_device_mode(ctrl_phy); break; case USB_MODE_DISCONNECT: - omap_control_usb_set_sessionend(ctrl_usb); + omap_control_usb_set_sessionend(ctrl_phy); break; default: dev_vdbg(dev, "invalid omap control usb mode\n"); @@ -207,13 +208,13 @@ EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); #ifdef CONFIG_OF -static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS; -static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2; -static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; -static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; -static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; +static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS; +static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2; +static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; +static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; +static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; -static const struct of_device_id omap_control_usb_id_table[] = { +static const struct of_device_id omap_control_phy_id_table[] = { { .compatible = "ti,control-phy-otghs", .data = &otghs_data, @@ -236,84 +237,84 @@ static const struct of_device_id omap_control_usb_id_table[] = { }, {}, }; -MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); +MODULE_DEVICE_TABLE(of, omap_control_phy_id_table); #endif -static int omap_control_usb_probe(struct platform_device *pdev) +static int omap_control_phy_probe(struct platform_device *pdev) { struct resource *res; const struct of_device_id *of_id; - struct omap_control_usb *control_usb; + struct omap_control_phy *control_phy; - of_id = of_match_device(of_match_ptr(omap_control_usb_id_table), - &pdev->dev); + of_id = of_match_device(of_match_ptr(omap_control_phy_id_table), + &pdev->dev); if (!of_id) return -EINVAL; - control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), + control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy), GFP_KERNEL); - if (!control_usb) { - dev_err(&pdev->dev, "unable to alloc memory for control usb\n"); + if (!control_phy) { + dev_err(&pdev->dev, "unable to alloc memory for control phy\n"); return -ENOMEM; } - control_usb->dev = &pdev->dev; - control_usb->type = *(enum omap_control_usb_type *)of_id->data; + control_phy->dev = &pdev->dev; + control_phy->type = *(enum omap_control_phy_type *)of_id->data; - if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) { + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otghs_control"); - control_usb->otghs_control = devm_ioremap_resource( + control_phy->otghs_control = devm_ioremap_resource( &pdev->dev, res); - if (IS_ERR(control_usb->otghs_control)) - return PTR_ERR(control_usb->otghs_control); + if (IS_ERR(control_phy->otghs_control)) + return PTR_ERR(control_phy->otghs_control); } else { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "power"); - control_usb->power = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(control_usb->power)) { + control_phy->power = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_phy->power)) { dev_err(&pdev->dev, "Couldn't get power register\n"); - return PTR_ERR(control_usb->power); + return PTR_ERR(control_phy->power); } } - if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) { - control_usb->sys_clk = devm_clk_get(control_usb->dev, + if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) { + control_phy->sys_clk = devm_clk_get(control_phy->dev, "sys_clkin"); - if (IS_ERR(control_usb->sys_clk)) { + if (IS_ERR(control_phy->sys_clk)) { pr_err("%s: unable to get sys_clkin\n", __func__); return -EINVAL; } } - dev_set_drvdata(control_usb->dev, control_usb); + dev_set_drvdata(control_phy->dev, control_phy); return 0; } -static struct platform_driver omap_control_usb_driver = { - .probe = omap_control_usb_probe, +static struct platform_driver omap_control_phy_driver = { + .probe = omap_control_phy_probe, .driver = { - .name = "omap-control-usb", + .name = "omap-control-phy", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(omap_control_usb_id_table), + .of_match_table = of_match_ptr(omap_control_phy_id_table), }, }; -static int __init omap_control_usb_init(void) +static int __init omap_control_phy_init(void) { - return platform_driver_register(&omap_control_usb_driver); + return platform_driver_register(&omap_control_phy_driver); } -subsys_initcall(omap_control_usb_init); +subsys_initcall(omap_control_phy_init); -static void __exit omap_control_usb_exit(void) +static void __exit omap_control_phy_exit(void) { - platform_driver_unregister(&omap_control_usb_driver); + platform_driver_unregister(&omap_control_phy_driver); } -module_exit(omap_control_usb_exit); +module_exit(omap_control_phy_exit); -MODULE_ALIAS("platform: omap_control_usb"); +MODULE_ALIAS("platform: omap_control_phy"); MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP Control Module USB Driver"); +MODULE_DESCRIPTION("OMAP Control Module PHY Driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 3cc4aba6e50e..a2205a841e5e 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include @@ -105,7 +105,7 @@ static int omap_usb_power_off(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 0); return 0; } @@ -114,7 +114,7 @@ static int omap_usb_power_on(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_usb_phy_power(phy->control_dev, 1); + omap_control_phy_power(phy->control_dev, 1); return 0; } @@ -251,7 +251,7 @@ static int omap_usb2_probe(struct platform_device *pdev) } phy->control_dev = &control_pdev->dev; - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 0); otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index c8d16746a5e2..fd029b14cb3e 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #define PLL_STATUS 0x00000004 @@ -134,7 +134,7 @@ static int ti_pipe3_power_off(struct phy *x) return -EBUSY; } - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 0); return 0; } @@ -232,7 +232,7 @@ static int ti_pipe3_init(struct phy *x) if (ret) return ret; - omap_control_usb_phy_power(phy->control_dev, 1); + omap_control_phy_power(phy->control_dev, 1); return 0; } @@ -304,7 +304,7 @@ static int ti_pipe3_probe(struct platform_device *pdev) phy->control_dev = &control_pdev->dev; - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 0); platform_set_drvdata(pdev, phy); pm_runtime_enable(phy->dev); diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 8aa59a2c5eb2..d341c149a2f9 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include #include #include "musb_core.h" diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index c337ba2d066b..416e0c8cf6ff 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -75,16 +75,6 @@ config NOP_USB_XCEIV built-in with usb ip or which are autonomous and doesn't require any phy programming such as ISP1x04 etc. -config OMAP_CONTROL_USB - tristate "OMAP CONTROL USB Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - help - Enable this to add support for the USB part present in the control - module. This driver has API to power on the USB2 PHY and to write to - the mailbox. The mailbox is present only in omap4 and the register to - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an - additional register to power on USB3 PHY. - config AM335X_CONTROL_USB tristate diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 15f1878388f4..f8fa719a31b9 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o -obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/phy/omap_control_phy.h similarity index 68% rename from include/linux/usb/omap_control_usb.h rename to include/linux/phy/omap_control_phy.h index 69ae383ee3cc..5450403c7546 100644 --- a/include/linux/usb/omap_control_usb.h +++ b/include/linux/phy/omap_control_phy.h @@ -1,5 +1,5 @@ /* - * omap_control_usb.h - Header file for the USB part of control module. + * omap_control_phy.h - Header file for the PHY part of control module. * * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com * This program is free software; you can redistribute it and/or modify @@ -16,10 +16,10 @@ * */ -#ifndef __OMAP_CONTROL_USB_H__ -#define __OMAP_CONTROL_USB_H__ +#ifndef __OMAP_CONTROL_PHY_H__ +#define __OMAP_CONTROL_PHY_H__ -enum omap_control_usb_type { +enum omap_control_phy_type { OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */ OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */ @@ -27,7 +27,7 @@ enum omap_control_usb_type { OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */ }; -struct omap_control_usb { +struct omap_control_phy { struct device *dev; u32 __iomem *otghs_control; @@ -36,7 +36,7 @@ struct omap_control_usb { struct clk *sys_clk; - enum omap_control_usb_type type; + enum omap_control_phy_type type; }; enum omap_control_usb_mode { @@ -54,14 +54,14 @@ enum omap_control_usb_mode { #define OMAP_CTRL_DEV_SESSEND BIT(3) #define OMAP_CTRL_DEV_IDDIG BIT(4) -#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK 0x003FC000 -#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT 0xE +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE -#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK 0xFFC00000 -#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT 0x16 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16 -#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3 -#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0 +#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3 +#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0 #define OMAP_CTRL_USB2_PHY_PD BIT(28) @@ -70,13 +70,13 @@ enum omap_control_usb_mode { #define AM437X_CTRL_USB2_OTGVDET_EN BIT(19) #define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20) -#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB) -extern void omap_control_usb_phy_power(struct device *dev, int on); -extern void omap_control_usb_set_mode(struct device *dev, - enum omap_control_usb_mode mode); +#if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY) +void omap_control_phy_power(struct device *dev, int on); +void omap_control_usb_set_mode(struct device *dev, + enum omap_control_usb_mode mode); #else -static inline void omap_control_usb_phy_power(struct device *dev, int on) +static inline void omap_control_phy_power(struct device *dev, int on) { } @@ -86,4 +86,4 @@ static inline void omap_control_usb_set_mode(struct device *dev, } #endif -#endif /* __OMAP_CONTROL_USB_H__ */ +#endif /* __OMAP_CONTROL_PHY_H__ */ -- 2.20.1