From 14aaa9f0a318bd04cbb9d822524b817e95d8b343 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Thu, 8 Mar 2012 22:41:54 -0800 Subject: [PATCH] isci: Redesign device suspension, abort, cleanup. This commit changes the means by which outstanding I/Os are handled for cleanup. The likelihood is that this commit will be broken into smaller pieces, however that will be a later revision. Among the changes: - All completion structures have been removed from the tmf and abort paths. - Now using one completed I/O list, with the I/O completed in host bit being used to select error or normal callback paths. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams --- drivers/scsi/isci/host.c | 86 +-- drivers/scsi/isci/host.h | 1 - drivers/scsi/isci/init.c | 1 - drivers/scsi/isci/remote_device.c | 255 ++++---- drivers/scsi/isci/remote_device.h | 15 +- drivers/scsi/isci/remote_node_context.c | 23 +- drivers/scsi/isci/remote_node_context.h | 4 +- drivers/scsi/isci/request.c | 509 +++++----------- drivers/scsi/isci/request.h | 108 +--- drivers/scsi/isci/task.c | 758 ++++-------------------- drivers/scsi/isci/task.h | 132 +---- 11 files changed, 418 insertions(+), 1474 deletions(-) diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index d241b5722eb3..25d537e2f5c4 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1089,33 +1089,25 @@ void isci_host_completion_routine(unsigned long data) { struct isci_host *ihost = (struct isci_host *)data; struct list_head completed_request_list; - struct list_head errored_request_list; struct list_head *current_position; struct list_head *next_position; struct isci_request *request; - struct isci_request *next_request; struct sas_task *task; u16 active; INIT_LIST_HEAD(&completed_request_list); - INIT_LIST_HEAD(&errored_request_list); spin_lock_irq(&ihost->scic_lock); sci_controller_completion_handler(ihost); /* Take the lists of completed I/Os from the host. */ - list_splice_init(&ihost->requests_to_complete, &completed_request_list); - /* Take the list of errored I/Os from the host. */ - list_splice_init(&ihost->requests_to_errorback, - &errored_request_list); - spin_unlock_irq(&ihost->scic_lock); - /* Process any completions in the lists. */ + /* Process any completions in the list. */ list_for_each_safe(current_position, next_position, &completed_request_list) { @@ -1123,23 +1115,30 @@ void isci_host_completion_routine(unsigned long data) completed_node); task = isci_request_access_task(request); - /* Normal notification (task_done) */ - dev_dbg(&ihost->pdev->dev, - "%s: Normal - request/task = %p/%p\n", - __func__, - request, - task); /* Return the task to libsas */ if (task != NULL) { task->lldd_task = NULL; - if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - - /* If the task is already in the abort path, - * the task_done callback cannot be called. - */ - task->task_done(task); + if (!test_bit(IREQ_ABORT_PATH_ACTIVE, &request->flags) && + !(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + if (test_bit(IREQ_COMPLETE_IN_TARGET, + &request->flags)) { + + /* Normal notification (task_done) */ + dev_dbg(&ihost->pdev->dev, "%s: Normal" + " - request/task = %p/%p\n", + __func__, request, task); + + task->task_done(task); + } else { + dev_warn(&ihost->pdev->dev, + "%s: Error - request/task" + " = %p/%p\n", + __func__, request, task); + + sas_task_abort(task); + } } } @@ -1147,44 +1146,6 @@ void isci_host_completion_routine(unsigned long data) isci_free_tag(ihost, request->io_tag); spin_unlock_irq(&ihost->scic_lock); } - list_for_each_entry_safe(request, next_request, &errored_request_list, - completed_node) { - - task = isci_request_access_task(request); - - /* Use sas_task_abort */ - dev_warn(&ihost->pdev->dev, - "%s: Error - request/task = %p/%p\n", - __func__, - request, - task); - - if (task != NULL) { - - /* Put the task into the abort path if it's not there - * already. - */ - if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) - sas_task_abort(task); - - } else { - /* This is a case where the request has completed with a - * status such that it needed further target servicing, - * but the sas_task reference has already been removed - * from the request. Since it was errored, it was not - * being aborted, so there is nothing to do except free - * it. - */ - - spin_lock_irq(&ihost->scic_lock); - /* Remove the request from the remote device's list - * of pending requests. - */ - list_del_init(&request->dev_node); - isci_free_tag(ihost, request->io_tag); - spin_unlock_irq(&ihost->scic_lock); - } - } /* the coalesence timeout doubles at each encoding step, so * update it based on the ilog2 value of the outstanding requests @@ -2345,7 +2306,6 @@ static int sci_controller_dma_alloc(struct isci_host *ihost) ireq->tc = &ihost->task_context_table[i]; ireq->owning_controller = ihost; - spin_lock_init(&ireq->state_lock); ireq->request_daddr = dma; ireq->isci_host = ihost; ihost->reqs[i] = ireq; @@ -2697,6 +2657,10 @@ enum sci_status sci_controller_terminate_request(struct isci_host *ihost, return SCI_FAILURE_INVALID_STATE; } status = sci_io_request_terminate(ireq); + + dev_dbg(&ihost->pdev->dev, "%s: status=%d; ireq=%p; flags=%lx\n", + __func__, status, ireq, ireq->flags); + if ((status == SCI_SUCCESS) && !test_bit(IREQ_PENDING_ABORT, &ireq->flags) && !test_and_set_bit(IREQ_TC_ABORT_POSTED, &ireq->flags)) { @@ -2739,6 +2703,8 @@ enum sci_status sci_controller_complete_io(struct isci_host *ihost, index = ISCI_TAG_TCI(ireq->io_tag); clear_bit(IREQ_ACTIVE, &ireq->flags); + if (test_bit(IREQ_ABORT_PATH_ACTIVE, &ireq->flags)) + wake_up_all(&ihost->eventq); return SCI_SUCCESS; default: dev_warn(&ihost->pdev->dev, "%s invalid state: %d\n", diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 7272a0a375f2..eaa13c0be09a 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -205,7 +205,6 @@ struct isci_host { wait_queue_head_t eventq; struct tasklet_struct completion_tasklet; struct list_head requests_to_complete; - struct list_head requests_to_errorback; spinlock_t scic_lock; struct isci_request *reqs[SCI_MAX_IO_REQUESTS]; struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES]; diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 9e1c83e425ed..39f12703b893 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -556,7 +556,6 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) } INIT_LIST_HEAD(&ihost->requests_to_complete); - INIT_LIST_HEAD(&ihost->requests_to_errorback); for (i = 0; i < SCI_MAX_PORTS; i++) { struct isci_port *iport = &ihost->ports[i]; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 3048e02aeb7b..c47304cea45d 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -80,49 +80,6 @@ static enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev NULL, NULL); } -/** - * isci_remote_device_not_ready() - This function is called by the ihost when - * the remote device is not ready. We mark the isci device as ready (not - * "ready_for_io") and signal the waiting proccess. - * @isci_host: This parameter specifies the isci host object. - * @isci_device: This parameter specifies the remote device - * - * sci_lock is held on entrance to this function. - */ -static void isci_remote_device_not_ready(struct isci_host *ihost, - struct isci_remote_device *idev, u32 reason) -{ - struct isci_request *ireq; - - dev_dbg(&ihost->pdev->dev, - "%s: isci_device = %p\n", __func__, idev); - - switch (reason) { - case SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED: - set_bit(IDEV_GONE, &idev->flags); - break; - case SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED: - set_bit(IDEV_IO_NCQERROR, &idev->flags); - - /* Suspend the remote device so the I/O can be terminated. */ - sci_remote_device_suspend(idev); - - /* Kill all outstanding requests for the device. */ - list_for_each_entry(ireq, &idev->reqs_in_process, dev_node) { - - dev_dbg(&ihost->pdev->dev, - "%s: isci_device = %p request = %p\n", - __func__, idev, ireq); - - sci_controller_terminate_request(ihost, idev, ireq); - } - /* Fall through into the default case... */ - default: - clear_bit(IDEV_IO_READY, &idev->flags); - break; - } -} - /** * isci_remote_device_ready() - This function is called by the ihost when the * remote device is ready. We mark the isci device as ready and signal the @@ -142,49 +99,121 @@ static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote wake_up(&ihost->eventq); } -static int isci_remote_device_suspendcheck(struct isci_remote_device *idev) +static enum sci_status sci_remote_device_terminate_req( + struct isci_host *ihost, + struct isci_remote_device *idev, + int check_abort, + struct isci_request *ireq) +{ + dev_dbg(&ihost->pdev->dev, + "%s: idev=%p; flags=%lx; req=%p; req target=%p\n", + __func__, idev, idev->flags, ireq, ireq->target_device); + + if (!test_bit(IREQ_ACTIVE, &ireq->flags) || + (ireq->target_device != idev) || + (check_abort && !test_bit(IREQ_PENDING_ABORT, &ireq->flags))) + return SCI_SUCCESS; + + set_bit(IREQ_ABORT_PATH_ACTIVE, &ireq->flags); + + return sci_controller_terminate_request(ihost, idev, ireq); +} + +static enum sci_status sci_remote_device_terminate_reqs_checkabort( + struct isci_remote_device *idev, + int chk) { - return test_bit(IDEV_TXRX_SUSPENDED, &idev->flags) - || !test_bit(IDEV_ALLOCATED, &idev->flags); + struct isci_host *ihost = idev->owning_port->owning_controller; + enum sci_status status = SCI_SUCCESS; + u32 i; + + for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) { + struct isci_request *ireq = ihost->reqs[i]; + enum sci_status s; + + s = sci_remote_device_terminate_req(ihost, idev, chk, ireq); + if (s != SCI_SUCCESS) + status = s; + } + return status; } -enum sci_status isci_remote_device_suspend( +enum sci_status isci_remote_device_terminate_requests( struct isci_host *ihost, - struct isci_remote_device *idev) + struct isci_remote_device *idev, + struct isci_request *ireq) { - enum sci_status status; + enum sci_status status = SCI_SUCCESS; unsigned long flags; spin_lock_irqsave(&ihost->scic_lock, flags); - if (isci_get_device(idev->domain_dev) == NULL) { + if (isci_get_device(idev) == NULL) { + dev_dbg(&ihost->pdev->dev, "%s: failed isci_get_device(idev=%p)\n", + __func__, idev); spin_unlock_irqrestore(&ihost->scic_lock, flags); status = SCI_FAILURE; } else { - status = sci_remote_device_suspend(idev); - spin_unlock_irqrestore(&ihost->scic_lock, flags); - if (status == SCI_SUCCESS) { - dev_dbg(&ihost->pdev->dev, - "%s: idev=%p, about to wait\n", - __func__, idev); - wait_event(ihost->eventq, - isci_remote_device_suspendcheck(idev)); - status = test_bit(IDEV_TXRX_SUSPENDED, &idev->flags) - ? SCI_SUCCESS : SCI_FAILURE; - dev_dbg(&ihost->pdev->dev, - "%s: idev=%p, wait done, device is %s\n", - __func__, idev, - test_bit(IDEV_TXRX_SUSPENDED, &idev->flags) - ? "" : ""); + dev_dbg(&ihost->pdev->dev, + "%s: idev=%p, ireq=%p; started_request_count=%d, " + "about to wait\n", + __func__, idev, ireq, idev->started_request_count); + if (ireq) { + /* Terminate a specific TC. */ + sci_remote_device_terminate_req(ihost, idev, 0, ireq); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + wait_event(ihost->eventq, !test_bit(IREQ_ACTIVE, + &ireq->flags)); - } else - dev_dbg(scirdev_to_dev(idev), - "%s: sci_remote_device_suspend failed, " - "status = %d\n", __func__, status); + } else { + /* Terminate all TCs. */ + sci_remote_device_terminate_requests(idev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + wait_event(ihost->eventq, + idev->started_request_count == 0); + } + dev_dbg(&ihost->pdev->dev, "%s: idev=%p, wait done\n", + __func__, idev); isci_put_device(idev); } return status; } +/** +* isci_remote_device_not_ready() - This function is called by the ihost when +* the remote device is not ready. We mark the isci device as ready (not +* "ready_for_io") and signal the waiting proccess. +* @isci_host: This parameter specifies the isci host object. +* @isci_device: This parameter specifies the remote device +* +* sci_lock is held on entrance to this function. +*/ +static void isci_remote_device_not_ready(struct isci_host *ihost, + struct isci_remote_device *idev, + u32 reason) +{ + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); + + switch (reason) { + case SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED: + set_bit(IDEV_GONE, &idev->flags); + break; + case SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED: + set_bit(IDEV_IO_NCQERROR, &idev->flags); + + /* Suspend the remote device so the I/O can be terminated. */ + sci_remote_device_suspend(idev); + + /* Kill all outstanding requests for the device. */ + sci_remote_device_terminate_requests(idev); + + /* Fall through into the default case... */ + default: + clear_bit(IDEV_IO_READY, &idev->flags); + break; + } +} + /* called once the remote node context is ready to be freed. * The remote device can now report that its stop operation is complete. none */ @@ -196,36 +225,10 @@ static void rnc_destruct_done(void *_dev) sci_change_state(&idev->sm, SCI_DEV_STOPPED); } -static enum sci_status sci_remote_device_terminate_requests_checkabort( - struct isci_remote_device *idev, - int check_abort_pending) -{ - struct isci_host *ihost = idev->owning_port->owning_controller; - enum sci_status status = SCI_SUCCESS; - u32 i; - - for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) { - struct isci_request *ireq = ihost->reqs[i]; - enum sci_status s; - - if (!test_bit(IREQ_ACTIVE, &ireq->flags) || - (ireq->target_device != idev) || - (check_abort_pending && !test_bit(IREQ_PENDING_ABORT, - &ireq->flags))) - continue; - - s = sci_controller_terminate_request(ihost, idev, ireq); - if (s != SCI_SUCCESS) - status = s; - } - - return status; -} - enum sci_status sci_remote_device_terminate_requests( struct isci_remote_device *idev) { - return sci_remote_device_terminate_requests_checkabort(idev, 0); + return sci_remote_device_terminate_reqs_checkabort(idev, 0); } enum sci_status sci_remote_device_stop(struct isci_remote_device *idev, @@ -771,10 +774,6 @@ enum sci_status sci_remote_device_start_task(struct isci_host *ihost, if (status != SCI_SUCCESS) return status; - status = sci_remote_node_context_start_task(&idev->rnc, ireq); - if (status != SCI_SUCCESS) - goto out; - status = sci_request_start(ireq); if (status != SCI_SUCCESS) goto out; @@ -796,8 +795,9 @@ enum sci_status sci_remote_device_start_task(struct isci_host *ihost, sci_remote_node_context_suspend( &idev->rnc, SCI_SOFTWARE_SUSPENSION, SCI_SOFTWARE_SUSPEND_EXPECTED_EVENT, NULL, NULL); - sci_remote_node_context_resume( - &idev->rnc, sci_remote_device_continue_request, idev); + + status = sci_remote_node_context_start_task(&idev->rnc, ireq, + sci_remote_device_continue_request, idev); out: sci_remote_device_start_request(idev, ireq, status); @@ -811,7 +811,9 @@ enum sci_status sci_remote_device_start_task(struct isci_host *ihost, if (status != SCI_SUCCESS) return status; - status = sci_remote_node_context_start_task(&idev->rnc, ireq); + /* Resume the RNC as needed: */ + status = sci_remote_node_context_start_task(&idev->rnc, ireq, + NULL, NULL); if (status != SCI_SUCCESS) break; @@ -1322,20 +1324,6 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport, return status; } -void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev) -{ - DECLARE_COMPLETION_ONSTACK(aborted_task_completion); - - dev_dbg(&ihost->pdev->dev, - "%s: idev = %p\n", __func__, idev); - - /* Cleanup all requests pending for this device. */ - isci_terminate_pending_requests(ihost, idev); - - dev_dbg(&ihost->pdev->dev, - "%s: idev = %p, done\n", __func__, idev); -} - /** * This function builds the isci_remote_device when a libsas dev_found message * is received. @@ -1495,32 +1483,28 @@ int isci_remote_device_found(struct domain_device *dev) return status == SCI_SUCCESS ? 0 : -ENODEV; } -enum sci_status isci_remote_device_reset( +enum sci_status isci_remote_device_suspend_terminate( struct isci_host *ihost, - struct isci_remote_device *idev) + struct isci_remote_device *idev, + struct isci_request *ireq) { unsigned long flags; enum sci_status status; - /* Put the device into a reset state so the suspension will not - * automatically resume. - */ + /* Put the device into suspension. */ spin_lock_irqsave(&ihost->scic_lock, flags); - status = sci_remote_device_reset(idev); + sci_remote_device_suspend(idev); spin_unlock_irqrestore(&ihost->scic_lock, flags); - if (status != SCI_SUCCESS) { - dev_dbg(&ihost->pdev->dev, - "%s: sci_remote_device_reset(%p) returned %d!\n", - __func__, idev, status); - return status; - } - /* Wait for the device suspend. */ - status = isci_remote_device_suspend(ihost, idev); - if (status != SCI_SUCCESS) { + + /* Terminate and wait for the completions. */ + status = isci_remote_device_terminate_requests(ihost, idev, ireq); + if (status != SCI_SUCCESS) dev_dbg(&ihost->pdev->dev, - "%s: isci_remote_device_suspend(%p) returned %d!\n", + "%s: isci_remote_device_terminate_requests(%p) " + "returned %d!\n", __func__, idev, status); - } + + /* NOTE: RNC resumption is left to the caller! */ return status; } @@ -1533,7 +1517,7 @@ int isci_remote_device_is_safe_to_abort( enum sci_status sci_remote_device_abort_requests_pending_abort( struct isci_remote_device *idev) { - return sci_remote_device_terminate_requests_checkabort(idev, 1); + return sci_remote_device_terminate_reqs_checkabort(idev, 1); } enum sci_status isci_remote_device_reset_complete( @@ -1545,7 +1529,6 @@ enum sci_status isci_remote_device_reset_complete( spin_lock_irqsave(&ihost->scic_lock, flags); status = sci_remote_device_reset_complete(idev); - sci_remote_device_resume(idev, NULL, NULL); spin_unlock_irqrestore(&ihost->scic_lock, flags); return status; diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index a6a376e200ef..da43698e9eba 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -85,7 +85,6 @@ struct isci_remote_device { #define IDEV_GONE 3 #define IDEV_IO_READY 4 #define IDEV_IO_NCQERROR 5 - #define IDEV_TXRX_SUSPENDED 6 unsigned long flags; struct kref kref; struct isci_port *isci_port; @@ -107,10 +106,8 @@ struct isci_remote_device { /* device reference routines must be called under sci_lock */ static inline struct isci_remote_device *isci_get_device( - struct domain_device *dev) + struct isci_remote_device *idev) { - struct isci_remote_device *idev = dev->lldd_dev; - if (idev) kref_get(&idev->kref); return idev; @@ -378,4 +375,14 @@ enum sci_status isci_remote_device_reset( enum sci_status isci_remote_device_reset_complete( struct isci_host *ihost, struct isci_remote_device *idev); + +enum sci_status isci_remote_device_suspend_terminate( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status isci_remote_device_terminate_requests( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 7a8347e51767..feeca17f0f13 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -317,8 +317,6 @@ static void sci_remote_node_context_tx_rx_suspended_state_enter(struct sci_base_ struct isci_remote_device *idev = rnc_to_dev(rnc); struct isci_host *ihost = idev->owning_port->owning_controller; - set_bit(IDEV_TXRX_SUSPENDED, &idev->flags); - /* Terminate outstanding requests pending abort. */ sci_remote_device_abort_requests_pending_abort(idev); @@ -326,16 +324,6 @@ static void sci_remote_node_context_tx_rx_suspended_state_enter(struct sci_base_ sci_remote_node_context_continue_state_transitions(rnc); } -static void sci_remote_node_context_tx_rx_suspended_state_exit( - struct sci_base_state_machine *sm) -{ - struct sci_remote_node_context *rnc - = container_of(sm, typeof(*rnc), sm); - struct isci_remote_device *idev = rnc_to_dev(rnc); - - clear_bit(IDEV_TXRX_SUSPENDED, &idev->flags); -} - static void sci_remote_node_context_await_suspend_state_exit( struct sci_base_state_machine *sm) { @@ -366,8 +354,6 @@ static const struct sci_base_state sci_remote_node_context_state_table[] = { }, [SCI_RNC_TX_RX_SUSPENDED] = { .enter_state = sci_remote_node_context_tx_rx_suspended_state_enter, - .exit_state - = sci_remote_node_context_tx_rx_suspended_state_exit, }, [SCI_RNC_AWAIT_SUSPENSION] = { .exit_state = sci_remote_node_context_await_suspend_state_exit, @@ -671,8 +657,11 @@ enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context } } -enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc, - struct isci_request *ireq) +enum sci_status sci_remote_node_context_start_task( + struct sci_remote_node_context *sci_rnc, + struct isci_request *ireq, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) { enum scis_sds_remote_node_context_states state; @@ -684,7 +673,7 @@ enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_contex return SCI_SUCCESS; case SCI_RNC_TX_SUSPENDED: case SCI_RNC_TX_RX_SUSPENDED: - sci_remote_node_context_resume(sci_rnc, NULL, NULL); + sci_remote_node_context_resume(sci_rnc, cb_fn, cb_p); return SCI_SUCCESS; default: dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index 5ddf88b53133..2870af14edab 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -211,7 +211,9 @@ enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *s scics_sds_remote_node_context_callback cb_fn, void *cb_p); enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc, - struct isci_request *ireq); + struct isci_request *ireq, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p); enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context *sci_rnc, struct isci_request *ireq); int sci_remote_node_context_is_safe_to_abort( diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 1f314d0d71d5..f4e80f31423c 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2491,9 +2491,6 @@ static void isci_request_process_response_iu( * @request: This parameter is the completed isci_request object. * @response_ptr: This parameter specifies the service response for the I/O. * @status_ptr: This parameter specifies the exec status for the I/O. - * @complete_to_host_ptr: This parameter specifies the action to be taken by - * the LLDD with respect to completing this request or forcing an abort - * condition on the I/O. * @open_rej_reason: This parameter specifies the encoded reason for the * abandon-class reject. * @@ -2504,14 +2501,12 @@ static void isci_request_set_open_reject_status( struct sas_task *task, enum service_response *response_ptr, enum exec_status *status_ptr, - enum isci_completion_selection *complete_to_host_ptr, enum sas_open_rej_reason open_rej_reason) { /* Task in the target is done. */ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); *response_ptr = SAS_TASK_UNDELIVERED; *status_ptr = SAS_OPEN_REJECT; - *complete_to_host_ptr = isci_perform_normal_io_completion; task->task_status.open_rej_reason = open_rej_reason; } @@ -2521,9 +2516,6 @@ static void isci_request_set_open_reject_status( * @request: This parameter is the completed isci_request object. * @response_ptr: This parameter specifies the service response for the I/O. * @status_ptr: This parameter specifies the exec status for the I/O. - * @complete_to_host_ptr: This parameter specifies the action to be taken by - * the LLDD with respect to completing this request or forcing an abort - * condition on the I/O. * * none. */ @@ -2532,8 +2524,7 @@ static void isci_request_handle_controller_specific_errors( struct isci_request *request, struct sas_task *task, enum service_response *response_ptr, - enum exec_status *status_ptr, - enum isci_completion_selection *complete_to_host_ptr) + enum exec_status *status_ptr) { unsigned int cstatus; @@ -2574,9 +2565,6 @@ static void isci_request_handle_controller_specific_errors( *status_ptr = SAS_ABORTED_TASK; set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - - *complete_to_host_ptr = - isci_perform_normal_io_completion; } else { /* Task in the target is not done. */ *response_ptr = SAS_TASK_UNDELIVERED; @@ -2587,9 +2575,6 @@ static void isci_request_handle_controller_specific_errors( *status_ptr = SAM_STAT_TASK_ABORTED; clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - - *complete_to_host_ptr = - isci_perform_error_io_completion; } break; @@ -2618,8 +2603,6 @@ static void isci_request_handle_controller_specific_errors( *status_ptr = SAS_ABORTED_TASK; set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - - *complete_to_host_ptr = isci_perform_normal_io_completion; break; @@ -2630,7 +2613,7 @@ static void isci_request_handle_controller_specific_errors( isci_request_set_open_reject_status( request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_WRONG_DEST); + SAS_OREJ_WRONG_DEST); break; case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: @@ -2640,56 +2623,56 @@ static void isci_request_handle_controller_specific_errors( */ isci_request_set_open_reject_status( request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_RESV_AB0); + SAS_OREJ_RESV_AB0); break; case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: isci_request_set_open_reject_status( request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_RESV_AB1); + SAS_OREJ_RESV_AB1); break; case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: isci_request_set_open_reject_status( request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_RESV_AB2); + SAS_OREJ_RESV_AB2); break; case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: isci_request_set_open_reject_status( request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_RESV_AB3); + SAS_OREJ_RESV_AB3); break; case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: isci_request_set_open_reject_status( request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_BAD_DEST); + SAS_OREJ_BAD_DEST); break; case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY: isci_request_set_open_reject_status( request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_STP_NORES); + SAS_OREJ_STP_NORES); break; case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED: isci_request_set_open_reject_status( request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_EPROTO); + SAS_OREJ_EPROTO); break; case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED: isci_request_set_open_reject_status( request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_CONN_RATE); + SAS_OREJ_CONN_RATE); break; case SCU_TASK_DONE_LL_R_ERR: @@ -2721,95 +2704,12 @@ static void isci_request_handle_controller_specific_errors( *response_ptr = SAS_TASK_UNDELIVERED; *status_ptr = SAM_STAT_TASK_ABORTED; - if (task->task_proto == SAS_PROTOCOL_SMP) { + if (task->task_proto == SAS_PROTOCOL_SMP) set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - - *complete_to_host_ptr = isci_perform_normal_io_completion; - } else { + else clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - - *complete_to_host_ptr = isci_perform_error_io_completion; - } - break; - } -} - -/** - * isci_task_save_for_upper_layer_completion() - This function saves the - * request for later completion to the upper layer driver. - * @host: This parameter is a pointer to the host on which the the request - * should be queued (either as an error or success). - * @request: This parameter is the completed request. - * @response: This parameter is the response code for the completed task. - * @status: This parameter is the status code for the completed task. - * - * none. - */ -static void isci_task_save_for_upper_layer_completion( - struct isci_host *host, - struct isci_request *request, - enum service_response response, - enum exec_status status, - enum isci_completion_selection task_notification_selection) -{ - struct sas_task *task = isci_request_access_task(request); - - task_notification_selection - = isci_task_set_completion_status(task, response, status, - task_notification_selection); - - /* Tasks aborted specifically by a call to the lldd_abort_task - * function should not be completed to the host in the regular path. - */ - switch (task_notification_selection) { - - case isci_perform_normal_io_completion: - /* Normal notification (task_done) */ - - /* Add to the completed list. */ - list_add(&request->completed_node, - &host->requests_to_complete); - - /* Take the request off the device's pending request list. */ - list_del_init(&request->dev_node); - break; - - case isci_perform_aborted_io_completion: - /* No notification to libsas because this request is - * already in the abort path. - */ - /* Wake up whatever process was waiting for this - * request to complete. - */ - WARN_ON(request->io_request_completion == NULL); - - if (request->io_request_completion != NULL) { - - /* Signal whoever is waiting that this - * request is complete. - */ - complete(request->io_request_completion); - } - break; - - case isci_perform_error_io_completion: - /* Use sas_task_abort */ - /* Add to the aborted list. */ - list_add(&request->completed_node, - &host->requests_to_errorback); - break; - - default: - /* Add to the error to libsas list. */ - list_add(&request->completed_node, - &host->requests_to_errorback); break; } - dev_dbg(&host->pdev->dev, - "%s: %d - task = %p, response=%d (%d), status=%d (%d)\n", - __func__, task_notification_selection, task, - (task) ? task->task_status.resp : 0, response, - (task) ? task->task_status.stat : 0, status); } static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis) @@ -2844,9 +2744,6 @@ static void isci_request_io_request_complete(struct isci_host *ihost, struct isci_remote_device *idev = request->target_device; enum service_response response = SAS_TASK_UNDELIVERED; enum exec_status status = SAS_ABORTED_TASK; - enum isci_request_status request_status; - enum isci_completion_selection complete_to_host - = isci_perform_normal_io_completion; dev_dbg(&ihost->pdev->dev, "%s: request = %p, task = %p,\n" @@ -2857,282 +2754,158 @@ static void isci_request_io_request_complete(struct isci_host *ihost, task->data_dir, completion_status); - spin_lock(&request->state_lock); - request_status = request->status; - - /* Decode the request status. Note that if the request has been - * aborted by a task management function, we don't care - * what the status is. - */ - switch (request_status) { - - case aborted: - /* "aborted" indicates that the request was aborted by a task - * management function, since once a task management request is - * perfomed by the device, the request only completes because - * of the subsequent driver terminate. - * - * Aborted also means an external thread is explicitly managing - * this request, so that we do not complete it up the stack. - * - * The target is still there (since the TMF was successful). - */ - set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - response = SAS_TASK_COMPLETE; + /* The request is done from an SCU HW perspective. */ - /* See if the device has been/is being stopped. Note - * that we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - if (!idev) - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_ABORTED_TASK; + /* This is an active request being completed from the core. */ + switch (completion_status) { - complete_to_host = isci_perform_aborted_io_completion; - /* This was an aborted request. */ + case SCI_IO_FAILURE_RESPONSE_VALID: + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n", + __func__, request, task); - spin_unlock(&request->state_lock); - break; + if (sas_protocol_ata(task->task_proto)) { + isci_process_stp_response(task, &request->stp.rsp); + } else if (SAS_PROTOCOL_SSP == task->task_proto) { - case aborting: - /* aborting means that the task management function tried and - * failed to abort the request. We need to note the request - * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the - * target as down. - * - * Aborting also means an external thread is explicitly managing - * this request, so that we do not complete it up the stack. - */ - set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - response = SAS_TASK_UNDELIVERED; + /* crack the iu response buffer. */ + resp_iu = &request->ssp.rsp; + isci_request_process_response_iu(task, resp_iu, + &ihost->pdev->dev); - if (!idev) - /* The device has been /is being stopped. Note that - * we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_PHY_DOWN; + } else if (SAS_PROTOCOL_SMP == task->task_proto) { - complete_to_host = isci_perform_aborted_io_completion; + dev_err(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID: " + "SAS_PROTOCOL_SMP protocol\n", + __func__); - /* This was an aborted request. */ + } else + dev_err(&ihost->pdev->dev, + "%s: unknown protocol\n", __func__); - spin_unlock(&request->state_lock); + /* use the task status set in the task struct by the + * isci_request_process_response_iu call. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = task->task_status.resp; + status = task->task_status.stat; break; - case terminating: + case SCI_IO_SUCCESS: + case SCI_IO_SUCCESS_IO_DONE_EARLY: - /* This was an terminated request. This happens when - * the I/O is being terminated because of an action on - * the device (reset, tear down, etc.), and the I/O needs - * to be completed up the stack. - */ + response = SAS_TASK_COMPLETE; + status = SAM_STAT_GOOD; set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - response = SAS_TASK_UNDELIVERED; - /* See if the device has been/is being stopped. Note - * that we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - if (!idev) - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_ABORTED_TASK; - - complete_to_host = isci_perform_aborted_io_completion; - - /* This was a terminated request. */ - - spin_unlock(&request->state_lock); - break; + if (completion_status == SCI_IO_SUCCESS_IO_DONE_EARLY) { - case dead: - /* This was a terminated request that timed-out during the - * termination process. There is no task to complete to - * libsas. - */ - complete_to_host = isci_perform_normal_io_completion; - spin_unlock(&request->state_lock); - break; - - default: - - /* The request is done from an SCU HW perspective. */ - request->status = completed; + /* This was an SSP / STP / SATA transfer. + * There is a possibility that less data than + * the maximum was transferred. + */ + u32 transferred_length = sci_req_tx_bytes(request); - spin_unlock(&request->state_lock); + task->task_status.residual + = task->total_xfer_len - transferred_length; - /* This is an active request being completed from the core. */ - switch (completion_status) { + /* If there were residual bytes, call this an + * underrun. + */ + if (task->task_status.residual != 0) + status = SAS_DATA_UNDERRUN; - case SCI_IO_FAILURE_RESPONSE_VALID: dev_dbg(&ihost->pdev->dev, - "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n", - __func__, - request, - task); - - if (sas_protocol_ata(task->task_proto)) { - isci_process_stp_response(task, &request->stp.rsp); - } else if (SAS_PROTOCOL_SSP == task->task_proto) { - - /* crack the iu response buffer. */ - resp_iu = &request->ssp.rsp; - isci_request_process_response_iu(task, resp_iu, - &ihost->pdev->dev); - - } else if (SAS_PROTOCOL_SMP == task->task_proto) { + "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n", + __func__, status); - dev_err(&ihost->pdev->dev, - "%s: SCI_IO_FAILURE_RESPONSE_VALID: " - "SAS_PROTOCOL_SMP protocol\n", - __func__); - - } else - dev_err(&ihost->pdev->dev, - "%s: unknown protocol\n", __func__); - - /* use the task status set in the task struct by the - * isci_request_process_response_iu call. - */ - set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - response = task->task_status.resp; - status = task->task_status.stat; - break; - - case SCI_IO_SUCCESS: - case SCI_IO_SUCCESS_IO_DONE_EARLY: - - response = SAS_TASK_COMPLETE; - status = SAM_STAT_GOOD; - set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - - if (completion_status == SCI_IO_SUCCESS_IO_DONE_EARLY) { - - /* This was an SSP / STP / SATA transfer. - * There is a possibility that less data than - * the maximum was transferred. - */ - u32 transferred_length = sci_req_tx_bytes(request); - - task->task_status.residual - = task->total_xfer_len - transferred_length; + } else + dev_dbg(&ihost->pdev->dev, "%s: SCI_IO_SUCCESS\n", + __func__); + break; - /* If there were residual bytes, call this an - * underrun. - */ - if (task->task_status.residual != 0) - status = SAS_DATA_UNDERRUN; + case SCI_IO_FAILURE_TERMINATED: - dev_dbg(&ihost->pdev->dev, - "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n", - __func__, - status); + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n", + __func__, request, task); - } else - dev_dbg(&ihost->pdev->dev, - "%s: SCI_IO_SUCCESS\n", - __func__); + /* The request was terminated explicitly. */ + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_UNDELIVERED; - break; + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + break; - case SCI_IO_FAILURE_TERMINATED: - dev_dbg(&ihost->pdev->dev, - "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n", - __func__, - request, - task); + case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR: - /* The request was terminated explicitly. No handling - * is needed in the SCSI error handler path. - */ - set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - response = SAS_TASK_UNDELIVERED; + isci_request_handle_controller_specific_errors(idev, request, + task, &response, + &status); + break; - /* See if the device has been/is being stopped. Note - * that we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - if (!idev) - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_ABORTED_TASK; + case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED: + /* This is a special case, in that the I/O completion + * is telling us that the device needs a reset. + * In order for the device reset condition to be + * noticed, the I/O has to be handled in the error + * handler. Set the reset flag and cause the + * SCSI error thread to be scheduled. + */ + spin_lock_irqsave(&task->task_state_lock, task_flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, task_flags); - complete_to_host = isci_perform_normal_io_completion; - break; + /* Fail the I/O. */ + response = SAS_TASK_UNDELIVERED; + status = SAM_STAT_TASK_ABORTED; - case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR: + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; - isci_request_handle_controller_specific_errors( - idev, request, task, &response, &status, - &complete_to_host); + case SCI_FAILURE_RETRY_REQUIRED: - break; + /* Fail the I/O so it can be retried. */ + response = SAS_TASK_UNDELIVERED; + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; - case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED: - /* This is a special case, in that the I/O completion - * is telling us that the device needs a reset. - * In order for the device reset condition to be - * noticed, the I/O has to be handled in the error - * handler. Set the reset flag and cause the - * SCSI error thread to be scheduled. - */ - spin_lock_irqsave(&task->task_state_lock, task_flags); - task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; - spin_unlock_irqrestore(&task->task_state_lock, task_flags); + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; - /* Fail the I/O. */ - response = SAS_TASK_UNDELIVERED; - status = SAM_STAT_TASK_ABORTED; - complete_to_host = isci_perform_error_io_completion; - clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - break; + default: + /* Catch any otherwise unhandled error codes here. */ + dev_dbg(&ihost->pdev->dev, + "%s: invalid completion code: 0x%x - " + "isci_request = %p\n", + __func__, completion_status, request); - case SCI_FAILURE_RETRY_REQUIRED: + response = SAS_TASK_UNDELIVERED; - /* Fail the I/O so it can be retried. */ - response = SAS_TASK_UNDELIVERED; - if (!idev) - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_ABORTED_TASK; + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; - complete_to_host = isci_perform_normal_io_completion; + if (SAS_PROTOCOL_SMP == task->task_proto) set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - break; - - - default: - /* Catch any otherwise unhandled error codes here. */ - dev_dbg(&ihost->pdev->dev, - "%s: invalid completion code: 0x%x - " - "isci_request = %p\n", - __func__, completion_status, request); - - response = SAS_TASK_UNDELIVERED; - - /* See if the device has been/is being stopped. Note - * that we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - if (!idev) - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_ABORTED_TASK; - - if (SAS_PROTOCOL_SMP == task->task_proto) { - set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - complete_to_host = isci_perform_normal_io_completion; - } else { - clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); - complete_to_host = isci_perform_error_io_completion; - } - break; - } + else + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); break; } @@ -3167,10 +2940,24 @@ static void isci_request_io_request_complete(struct isci_host *ihost, break; } - /* Put the completed request on the correct list */ - isci_task_save_for_upper_layer_completion(ihost, request, response, - status, complete_to_host - ); + spin_lock_irqsave(&task->task_state_lock, task_flags); + + task->task_status.resp = response; + task->task_status.stat = status; + + if (test_bit(IREQ_COMPLETE_IN_TARGET, &request->flags)) { + /* Normal notification (task_done) */ + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + } + spin_unlock_irqrestore(&task->task_state_lock, task_flags); + + /* Add to the completed list. */ + list_add(&request->completed_node, &ihost->requests_to_complete); + + /* Take the request off the device's pending request list. */ + list_del_init(&request->dev_node); /* complete the io request to the core. */ sci_controller_complete_io(ihost, request->target_device, request); @@ -3626,7 +3413,6 @@ static struct isci_request *isci_request_from_tag(struct isci_host *ihost, u16 t ireq->num_sg_entries = 0; INIT_LIST_HEAD(&ireq->completed_node); INIT_LIST_HEAD(&ireq->dev_node); - isci_request_change_state(ireq, allocated); return ireq; } @@ -3721,15 +3507,12 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide */ list_add(&ireq->dev_node, &idev->reqs_in_process); - if (status == SCI_SUCCESS) { - isci_request_change_state(ireq, started); - } else { + if (status != SCI_SUCCESS) { /* The request did not really start in the * hardware, so clear the request handle * here so no terminations will be done. */ set_bit(IREQ_TERMINATED, &ireq->flags); - isci_request_change_state(ireq, completed); } spin_unlock_irqrestore(&ihost->scic_lock, flags); diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 8d55f78010aa..f3116a51235f 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -60,23 +60,6 @@ #include "host.h" #include "scu_task_context.h" -/** - * struct isci_request_status - This enum defines the possible states of an I/O - * request. - * - * - */ -enum isci_request_status { - unallocated = 0x00, - allocated = 0x01, - started = 0x02, - completed = 0x03, - aborting = 0x04, - aborted = 0x05, - terminating = 0x06, - dead = 0x07 -}; - /** * isci_stp_request - extra request infrastructure to handle pio/atapi protocol * @pio_len - number of bytes requested at PIO setup @@ -97,13 +80,13 @@ struct isci_stp_request { }; struct isci_request { - enum isci_request_status status; #define IREQ_COMPLETE_IN_TARGET 0 #define IREQ_TERMINATED 1 #define IREQ_TMF 2 #define IREQ_ACTIVE 3 #define IREQ_PENDING_ABORT 4 /* Set == device was not suspended yet */ #define IREQ_TC_ABORT_POSTED 5 + #define IREQ_ABORT_PATH_ACTIVE 6 unsigned long flags; /* XXX kill ttype and ttype_ptr, allocate full sas_task */ union ttype_ptr_union { @@ -115,7 +98,6 @@ struct isci_request { struct list_head completed_node; /* For use in the reqs_in_process list: */ struct list_head dev_node; - spinlock_t state_lock; dma_addr_t request_daddr; dma_addr_t zero_scatter_daddr; unsigned int num_sg_entries; @@ -304,92 +286,6 @@ sci_io_request_get_dma_addr(struct isci_request *ireq, void *virt_addr) return ireq->request_daddr + (requested_addr - base_addr); } -/** - * isci_request_change_state() - This function sets the status of the request - * object. - * @request: This parameter points to the isci_request object - * @status: This Parameter is the new status of the object - * - */ -static inline enum isci_request_status -isci_request_change_state(struct isci_request *isci_request, - enum isci_request_status status) -{ - enum isci_request_status old_state; - unsigned long flags; - - dev_dbg(&isci_request->isci_host->pdev->dev, - "%s: isci_request = %p, state = 0x%x\n", - __func__, - isci_request, - status); - - BUG_ON(isci_request == NULL); - - spin_lock_irqsave(&isci_request->state_lock, flags); - old_state = isci_request->status; - isci_request->status = status; - spin_unlock_irqrestore(&isci_request->state_lock, flags); - - return old_state; -} - -/** - * isci_request_change_started_to_newstate() - This function sets the status of - * the request object. - * @request: This parameter points to the isci_request object - * @status: This Parameter is the new status of the object - * - * state previous to any change. - */ -static inline enum isci_request_status -isci_request_change_started_to_newstate(struct isci_request *isci_request, - struct completion *completion_ptr, - enum isci_request_status newstate) -{ - enum isci_request_status old_state; - unsigned long flags; - - spin_lock_irqsave(&isci_request->state_lock, flags); - - old_state = isci_request->status; - - if (old_state == started || old_state == aborting) { - BUG_ON(isci_request->io_request_completion != NULL); - - isci_request->io_request_completion = completion_ptr; - isci_request->status = newstate; - } - - spin_unlock_irqrestore(&isci_request->state_lock, flags); - - dev_dbg(&isci_request->isci_host->pdev->dev, - "%s: isci_request = %p, old_state = 0x%x\n", - __func__, - isci_request, - old_state); - - return old_state; -} - -/** - * isci_request_change_started_to_aborted() - This function sets the status of - * the request object. - * @request: This parameter points to the isci_request object - * @completion_ptr: This parameter is saved as the kernel completion structure - * signalled when the old request completes. - * - * state previous to any change. - */ -static inline enum isci_request_status -isci_request_change_started_to_aborted(struct isci_request *isci_request, - struct completion *completion_ptr) -{ - return isci_request_change_started_to_newstate(isci_request, - completion_ptr, - aborted); -} - #define isci_request_access_task(req) ((req)->ttype_ptr.io_task_ptr) #define isci_request_access_tmf(req) ((req)->ttype_ptr.tmf_task_ptr) @@ -399,8 +295,6 @@ struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost, u16 tag); int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, struct sas_task *task, u16 tag); -void isci_terminate_pending_requests(struct isci_host *ihost, - struct isci_remote_device *idev); enum sci_status sci_task_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 26de06ef688e..29ce8815e799 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -78,54 +78,25 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, enum exec_status status) { - enum isci_completion_selection disposition; + unsigned long flags; - disposition = isci_perform_normal_io_completion; - disposition = isci_task_set_completion_status(task, response, status, - disposition); + /* Normal notification (task_done) */ + dev_dbg(&ihost->pdev->dev, "%s: task = %p, response=%d, status=%d\n", + __func__, task, response, status); - /* Tasks aborted specifically by a call to the lldd_abort_task - * function should not be completed to the host in the regular path. - */ - switch (disposition) { - case isci_perform_normal_io_completion: - /* Normal notification (task_done) */ - dev_dbg(&ihost->pdev->dev, - "%s: Normal - task = %p, response=%d, " - "status=%d\n", - __func__, task, response, status); - - task->lldd_task = NULL; - task->task_done(task); - break; - - case isci_perform_aborted_io_completion: - /* - * No notification because this request is already in the - * abort path. - */ - dev_dbg(&ihost->pdev->dev, - "%s: Aborted - task = %p, response=%d, " - "status=%d\n", - __func__, task, response, status); - break; + spin_lock_irqsave(&task->task_state_lock, flags); - case isci_perform_error_io_completion: - /* Use sas_task_abort */ - dev_dbg(&ihost->pdev->dev, - "%s: Error - task = %p, response=%d, " - "status=%d\n", - __func__, task, response, status); - sas_task_abort(task); - break; + task->task_status.resp = response; + task->task_status.stat = status; - default: - dev_dbg(&ihost->pdev->dev, - "%s: isci task notification default case!", - __func__); - sas_task_abort(task); - break; - } + /* Normal notification (task_done) */ + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + task->lldd_task = NULL; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + task->task_done(task); } #define for_each_sas_task(num, task) \ @@ -289,60 +260,6 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return ireq; } -/** -* isci_request_mark_zombie() - This function must be called with scic_lock held. -*/ -static void isci_request_mark_zombie(struct isci_host *ihost, struct isci_request *ireq) -{ - struct completion *tmf_completion = NULL; - struct completion *req_completion; - - /* Set the request state to "dead". */ - ireq->status = dead; - - req_completion = ireq->io_request_completion; - ireq->io_request_completion = NULL; - - if (test_bit(IREQ_TMF, &ireq->flags)) { - /* Break links with the TMF request. */ - struct isci_tmf *tmf = isci_request_access_tmf(ireq); - - /* In the case where a task request is dying, - * the thread waiting on the complete will sit and - * timeout unless we wake it now. Since the TMF - * has a default error status, complete it here - * to wake the waiting thread. - */ - if (tmf) { - tmf_completion = tmf->complete; - tmf->complete = NULL; - } - ireq->ttype_ptr.tmf_task_ptr = NULL; - dev_dbg(&ihost->pdev->dev, "%s: tmf_code %d, managed tag %#x\n", - __func__, tmf->tmf_code, tmf->io_tag); - } else { - /* Break links with the sas_task - the callback is done - * elsewhere. - */ - struct sas_task *task = isci_request_access_task(ireq); - - if (task) - task->lldd_task = NULL; - - ireq->ttype_ptr.io_task_ptr = NULL; - } - - dev_warn(&ihost->pdev->dev, "task context unrecoverable (tag: %#x)\n", - ireq->io_tag); - - /* Don't force waiting threads to timeout. */ - if (req_completion) - complete(req_completion); - - if (tmf_completion != NULL) - complete(tmf_completion); -} - static int isci_task_execute_tmf(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_tmf *tmf, unsigned long timeout_ms) @@ -400,15 +317,12 @@ static int isci_task_execute_tmf(struct isci_host *ihost, spin_unlock_irqrestore(&ihost->scic_lock, flags); goto err_tci; } - - if (tmf->cb_state_func != NULL) - tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data); - - isci_request_change_state(ireq, started); - /* add the request to the remote device request list. */ list_add(&ireq->dev_node, &idev->reqs_in_process); + /* The RNC must be unsuspended before the TMF can get a response. */ + sci_remote_device_resume(idev, NULL, NULL); + spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Wait for the TMF to complete, or a timeout. */ @@ -419,32 +333,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost, /* The TMF did not complete - this could be because * of an unplug. Terminate the TMF request now. */ - spin_lock_irqsave(&ihost->scic_lock, flags); - - if (tmf->cb_state_func != NULL) - tmf->cb_state_func(isci_tmf_timed_out, tmf, - tmf->cb_data); - - sci_controller_terminate_request(ihost, idev, ireq); - - spin_unlock_irqrestore(&ihost->scic_lock, flags); - - timeleft = wait_for_completion_timeout( - &completion, - msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC)); - - if (!timeleft) { - /* Strange condition - the termination of the TMF - * request timed-out. - */ - spin_lock_irqsave(&ihost->scic_lock, flags); - - /* If the TMF status has not changed, kill it. */ - if (tmf->status == SCI_FAILURE_TIMEOUT) - isci_request_mark_zombie(ihost, ireq); - - spin_unlock_irqrestore(&ihost->scic_lock, flags); - } + isci_remote_device_suspend_terminate(ihost, idev, ireq); } isci_print_tmf(ihost, tmf); @@ -476,316 +365,20 @@ static int isci_task_execute_tmf(struct isci_host *ihost, } static void isci_task_build_tmf(struct isci_tmf *tmf, - enum isci_tmf_function_codes code, - void (*tmf_sent_cb)(enum isci_tmf_cb_state, - struct isci_tmf *, - void *), - void *cb_data) + enum isci_tmf_function_codes code) { memset(tmf, 0, sizeof(*tmf)); - - tmf->tmf_code = code; - tmf->cb_state_func = tmf_sent_cb; - tmf->cb_data = cb_data; + tmf->tmf_code = code; } static void isci_task_build_abort_task_tmf(struct isci_tmf *tmf, enum isci_tmf_function_codes code, - void (*tmf_sent_cb)(enum isci_tmf_cb_state, - struct isci_tmf *, - void *), struct isci_request *old_request) { - isci_task_build_tmf(tmf, code, tmf_sent_cb, old_request); + isci_task_build_tmf(tmf, code); tmf->io_tag = old_request->io_tag; } -/** - * isci_task_validate_request_to_abort() - This function checks the given I/O - * against the "started" state. If the request is still "started", it's - * state is changed to aborted. NOTE: isci_host->scic_lock MUST BE HELD - * BEFORE CALLING THIS FUNCTION. - * @isci_request: This parameter specifies the request object to control. - * @isci_host: This parameter specifies the ISCI host object - * @isci_device: This is the device to which the request is pending. - * @aborted_io_completion: This is a completion structure that will be added to - * the request in case it is changed to aborting; this completion is - * triggered when the request is fully completed. - * - * Either "started" on successful change of the task status to "aborted", or - * "unallocated" if the task cannot be controlled. - */ -static enum isci_request_status isci_task_validate_request_to_abort( - struct isci_request *isci_request, - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - struct completion *aborted_io_completion) -{ - enum isci_request_status old_state = unallocated; - - /* Only abort the task if it's in the - * device's request_in_process list - */ - if (isci_request && !list_empty(&isci_request->dev_node)) { - old_state = isci_request_change_started_to_aborted( - isci_request, aborted_io_completion); - - } - - return old_state; -} - -static int isci_request_is_dealloc_managed(enum isci_request_status stat) -{ - switch (stat) { - case aborted: - case aborting: - case terminating: - case completed: - case dead: - return true; - default: - return false; - } -} - -/** - * isci_terminate_request_core() - This function will terminate the given - * request, and wait for it to complete. This function must only be called - * from a thread that can wait. Note that the request is terminated and - * completed (back to the host, if started there). - * @ihost: This SCU. - * @idev: The target. - * @isci_request: The I/O request to be terminated. - * - */ -static void isci_terminate_request_core(struct isci_host *ihost, - struct isci_remote_device *idev, - struct isci_request *isci_request) -{ - enum sci_status status = SCI_SUCCESS; - bool was_terminated = false; - bool needs_cleanup_handling = false; - unsigned long flags; - unsigned long termination_completed = 1; - struct completion *io_request_completion; - - dev_dbg(&ihost->pdev->dev, - "%s: device = %p; request = %p\n", - __func__, idev, isci_request); - - spin_lock_irqsave(&ihost->scic_lock, flags); - - io_request_completion = isci_request->io_request_completion; - - /* Note that we are not going to control - * the target to abort the request. - */ - set_bit(IREQ_COMPLETE_IN_TARGET, &isci_request->flags); - - /* Make sure the request wasn't just sitting around signalling - * device condition (if the request handle is NULL, then the - * request completed but needed additional handling here). - */ - if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { - was_terminated = true; - needs_cleanup_handling = true; - status = sci_controller_terminate_request(ihost, - idev, - isci_request); - } - spin_unlock_irqrestore(&ihost->scic_lock, flags); - - /* - * The only time the request to terminate will - * fail is when the io request is completed and - * being aborted. - */ - if (status != SCI_SUCCESS) { - dev_dbg(&ihost->pdev->dev, - "%s: sci_controller_terminate_request" - " returned = 0x%x\n", - __func__, status); - - isci_request->io_request_completion = NULL; - - } else { - if (was_terminated) { - dev_dbg(&ihost->pdev->dev, - "%s: before completion wait (%p/%p)\n", - __func__, isci_request, io_request_completion); - - /* Wait here for the request to complete. */ - termination_completed - = wait_for_completion_timeout( - io_request_completion, - msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC)); - - if (!termination_completed) { - - /* The request to terminate has timed out. */ - spin_lock_irqsave(&ihost->scic_lock, flags); - - /* Check for state changes. */ - if (!test_bit(IREQ_TERMINATED, - &isci_request->flags)) { - - /* The best we can do is to have the - * request die a silent death if it - * ever really completes. - */ - isci_request_mark_zombie(ihost, - isci_request); - needs_cleanup_handling = true; - } else - termination_completed = 1; - - spin_unlock_irqrestore(&ihost->scic_lock, - flags); - - if (!termination_completed) { - - dev_dbg(&ihost->pdev->dev, - "%s: *** Timeout waiting for " - "termination(%p/%p)\n", - __func__, io_request_completion, - isci_request); - - /* The request can no longer be referenced - * safely since it may go away if the - * termination every really does complete. - */ - isci_request = NULL; - } - } - if (termination_completed) - dev_dbg(&ihost->pdev->dev, - "%s: after completion wait (%p/%p)\n", - __func__, isci_request, io_request_completion); - } - - if (termination_completed) { - - isci_request->io_request_completion = NULL; - - /* Peek at the status of the request. This will tell - * us if there was special handling on the request such that it - * needs to be detached and freed here. - */ - spin_lock_irqsave(&isci_request->state_lock, flags); - - needs_cleanup_handling - = isci_request_is_dealloc_managed( - isci_request->status); - - spin_unlock_irqrestore(&isci_request->state_lock, flags); - - } - if (needs_cleanup_handling) { - - dev_dbg(&ihost->pdev->dev, - "%s: cleanup isci_device=%p, request=%p\n", - __func__, idev, isci_request); - - if (isci_request != NULL) { - spin_lock_irqsave(&ihost->scic_lock, flags); - isci_free_tag(ihost, isci_request->io_tag); - isci_request_change_state(isci_request, unallocated); - list_del_init(&isci_request->dev_node); - spin_unlock_irqrestore(&ihost->scic_lock, flags); - } - } - } -} - -/** - * isci_terminate_pending_requests() - This function will change the all of the - * requests on the given device's state to "aborting", will terminate the - * requests, and wait for them to complete. This function must only be - * called from a thread that can wait. Note that the requests are all - * terminated and completed (back to the host, if started there). - * @isci_host: This parameter specifies SCU. - * @idev: This parameter specifies the target. - * - */ -void isci_terminate_pending_requests(struct isci_host *ihost, - struct isci_remote_device *idev) -{ - struct completion request_completion; - enum isci_request_status old_state; - unsigned long flags; - LIST_HEAD(list); - - isci_remote_device_suspend(ihost, idev); - - spin_lock_irqsave(&ihost->scic_lock, flags); - list_splice_init(&idev->reqs_in_process, &list); - - /* assumes that isci_terminate_request_core deletes from the list */ - while (!list_empty(&list)) { - struct isci_request *ireq = list_entry(list.next, typeof(*ireq), dev_node); - - /* Change state to "terminating" if it is currently - * "started". - */ - old_state = isci_request_change_started_to_newstate(ireq, - &request_completion, - terminating); - switch (old_state) { - case started: - case completed: - case aborting: - break; - default: - /* termination in progress, or otherwise dispositioned. - * We know the request was on 'list' so should be safe - * to move it back to reqs_in_process - */ - list_move(&ireq->dev_node, &idev->reqs_in_process); - ireq = NULL; - break; - } - - if (!ireq) - continue; - spin_unlock_irqrestore(&ihost->scic_lock, flags); - - init_completion(&request_completion); - - dev_dbg(&ihost->pdev->dev, - "%s: idev=%p request=%p; task=%p old_state=%d\n", - __func__, idev, ireq, - (!test_bit(IREQ_TMF, &ireq->flags) - ? isci_request_access_task(ireq) - : NULL), - old_state); - - /* If the old_state is started: - * This request was not already being aborted. If it had been, - * then the aborting I/O (ie. the TMF request) would not be in - * the aborting state, and thus would be terminated here. Note - * that since the TMF completion's call to the kernel function - * "complete()" does not happen until the pending I/O request - * terminate fully completes, we do not have to implement a - * special wait here for already aborting requests - the - * termination of the TMF request will force the request - * to finish it's already started terminate. - * - * If old_state == completed: - * This request completed from the SCU hardware perspective - * and now just needs cleaning up in terms of freeing the - * request and potentially calling up to libsas. - * - * If old_state == aborting: - * This request has already gone through a TMF timeout, but may - * not have been terminated; needs cleaning up at least. - */ - isci_terminate_request_core(ihost, idev, ireq); - spin_lock_irqsave(&ihost->scic_lock, flags); - } - spin_unlock_irqrestore(&ihost->scic_lock, flags); -} - /** * isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain * Template functions. @@ -809,7 +402,7 @@ static int isci_task_send_lu_reset_sas( * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED"). */ - isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset, NULL, NULL); + isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset); #define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */ ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_LU_RESET_TIMEOUT_MS); @@ -829,48 +422,41 @@ static int isci_task_send_lu_reset_sas( int isci_task_lu_reset(struct domain_device *dev, u8 *lun) { struct isci_host *ihost = dev_to_ihost(dev); - struct isci_remote_device *isci_device; + struct isci_remote_device *idev; unsigned long flags; int ret; spin_lock_irqsave(&ihost->scic_lock, flags); - isci_device = isci_lookup_device(dev); + idev = isci_lookup_device(dev); spin_unlock_irqrestore(&ihost->scic_lock, flags); dev_dbg(&ihost->pdev->dev, "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", - __func__, dev, ihost, isci_device); + __func__, dev, ihost, idev); - if (!isci_device) { + if (!idev) { /* If the device is gone, escalate to I_T_Nexus_Reset. */ dev_dbg(&ihost->pdev->dev, "%s: No dev\n", __func__); ret = TMF_RESP_FUNC_FAILED; goto out; } - if (isci_remote_device_suspend(ihost, isci_device) != SCI_SUCCESS) { - dev_dbg(&ihost->pdev->dev, - "%s: device = %p; failed to suspend\n", - __func__, isci_device); - ret = TMF_RESP_FUNC_FAILED; - goto out; - } - /* Send the task management part of the reset. */ if (dev_is_sata(dev)) { sas_ata_schedule_reset(dev); ret = TMF_RESP_FUNC_COMPLETE; - } else - ret = isci_task_send_lu_reset_sas(ihost, isci_device, lun); - - /* If the LUN reset worked, all the I/O can now be terminated. */ - if (ret == TMF_RESP_FUNC_COMPLETE) { - /* Terminate all I/O now. */ - isci_terminate_pending_requests(ihost, isci_device); - isci_remote_device_resume(ihost, isci_device, NULL, NULL); + } else { + /* Suspend the RNC, kill all TCs */ + if (isci_remote_device_suspend_terminate(ihost, idev, NULL) + != SCI_SUCCESS) { + ret = TMF_RESP_FUNC_FAILED; + goto out; + } + /* Send the task management part of the reset. */ + ret = isci_task_send_lu_reset_sas(ihost, idev, lun); } out: - isci_put_device(isci_device); + isci_put_device(idev); return ret; } @@ -890,63 +476,6 @@ int isci_task_clear_nexus_ha(struct sas_ha_struct *ha) /* Task Management Functions. Must be called from process context. */ -/** - * isci_abort_task_process_cb() - This is a helper function for the abort task - * TMF command. It manages the request state with respect to the successful - * transmission / completion of the abort task request. - * @cb_state: This parameter specifies when this function was called - after - * the TMF request has been started and after it has timed-out. - * @tmf: This parameter specifies the TMF in progress. - * - * - */ -static void isci_abort_task_process_cb( - enum isci_tmf_cb_state cb_state, - struct isci_tmf *tmf, - void *cb_data) -{ - struct isci_request *old_request; - - old_request = (struct isci_request *)cb_data; - - dev_dbg(&old_request->isci_host->pdev->dev, - "%s: tmf=%p, old_request=%p\n", - __func__, tmf, old_request); - - switch (cb_state) { - - case isci_tmf_started: - /* The TMF has been started. Nothing to do here, since the - * request state was already set to "aborted" by the abort - * task function. - */ - if ((old_request->status != aborted) - && (old_request->status != completed)) - dev_dbg(&old_request->isci_host->pdev->dev, - "%s: Bad request status (%d): tmf=%p, old_request=%p\n", - __func__, old_request->status, tmf, old_request); - break; - - case isci_tmf_timed_out: - - /* Set the task's state to "aborting", since the abort task - * function thread set it to "aborted" (above) in anticipation - * of the task management request working correctly. Since the - * timeout has now fired, the TMF request failed. We set the - * state such that the request completion will indicate the - * device is no longer present. - */ - isci_request_change_state(old_request, aborting); - break; - - default: - dev_dbg(&old_request->isci_host->pdev->dev, - "%s: Bad cb_state (%d): tmf=%p, old_request=%p\n", - __func__, cb_state, tmf, old_request); - break; - } -} - /** * isci_task_abort_task() - This function is one of the SAS Domain Template * functions. This function is called by libsas to abort a specified task. @@ -956,22 +485,20 @@ static void isci_abort_task_process_cb( */ int isci_task_abort_task(struct sas_task *task) { - struct isci_host *isci_host = dev_to_ihost(task->dev); + struct isci_host *ihost = dev_to_ihost(task->dev); DECLARE_COMPLETION_ONSTACK(aborted_io_completion); struct isci_request *old_request = NULL; - enum isci_request_status old_state; - struct isci_remote_device *isci_device = NULL; + struct isci_remote_device *idev = NULL; struct isci_tmf tmf; int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; - int perform_termination = 0; /* Get the isci_request reference from the task. Note that * this check does not depend on the pending request list * in the device, because tasks driving resets may land here * after completion in the core. */ - spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock_irqsave(&ihost->scic_lock, flags); spin_lock(&task->task_state_lock); old_request = task->lldd_task; @@ -980,20 +507,20 @@ int isci_task_abort_task(struct sas_task *task) if (!(task->task_state_flags & SAS_TASK_STATE_DONE) && (task->task_state_flags & SAS_TASK_AT_INITIATOR) && old_request) - isci_device = isci_lookup_device(task->dev); + idev = isci_lookup_device(task->dev); spin_unlock(&task->task_state_lock); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); - dev_warn(&isci_host->pdev->dev, - "%s: dev = %p, task = %p, old_request == %p\n", - __func__, isci_device, task, old_request); + dev_warn(&ihost->pdev->dev, + "%s: dev = %p, task = %p, old_request == %p\n", + __func__, idev, task, old_request); /* Device reset conditions signalled in task_state_flags are the * responsbility of libsas to observe at the start of the error * handler thread. */ - if (!isci_device || !old_request) { + if (!idev || !old_request) { /* The request has already completed and there * is nothing to do here other than to set the task * done bit, and indicate that the task abort function @@ -1007,126 +534,66 @@ int isci_task_abort_task(struct sas_task *task) ret = TMF_RESP_FUNC_COMPLETE; - dev_warn(&isci_host->pdev->dev, - "%s: abort task not needed for %p\n", - __func__, task); + dev_warn(&ihost->pdev->dev, + "%s: abort task not needed for %p\n", + __func__, task); goto out; } - - spin_lock_irqsave(&isci_host->scic_lock, flags); - - /* Check the request status and change to "aborted" if currently - * "starting"; if true then set the I/O kernel completion - * struct that will be triggered when the request completes. - */ - old_state = isci_task_validate_request_to_abort( - old_request, isci_host, isci_device, - &aborted_io_completion); - if ((old_state != started) && - (old_state != completed) && - (old_state != aborting)) { - - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - - /* The request was already being handled by someone else (because - * they got to set the state away from started). - */ - dev_warn(&isci_host->pdev->dev, - "%s: device = %p; old_request %p already being aborted\n", - __func__, - isci_device, old_request); - ret = TMF_RESP_FUNC_COMPLETE; + /* Suspend the RNC, kill the TC */ + if (isci_remote_device_suspend_terminate(ihost, idev, old_request) + != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: isci_remote_device_reset_terminate(dev=%p, " + "req=%p, task=%p) failed\n", + __func__, idev, old_request, task); + ret = TMF_RESP_FUNC_FAILED; goto out; } + spin_lock_irqsave(&ihost->scic_lock, flags); + if (task->task_proto == SAS_PROTOCOL_SMP || sas_protocol_ata(task->task_proto) || test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + /* No task to send, so explicitly resume the device here */ + sci_remote_device_resume(idev, NULL, NULL); - dev_warn(&isci_host->pdev->dev, - "%s: %s request" - " or complete_in_target (%d), thus no TMF\n", - __func__, - ((task->task_proto == SAS_PROTOCOL_SMP) - ? "SMP" - : (sas_protocol_ata(task->task_proto) - ? "SATA/STP" - : "") - ), - test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)); - - if (test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { - spin_lock_irqsave(&task->task_state_lock, flags); - task->task_state_flags |= SAS_TASK_STATE_DONE; - task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | - SAS_TASK_STATE_PENDING); - spin_unlock_irqrestore(&task->task_state_lock, flags); - ret = TMF_RESP_FUNC_COMPLETE; - } else { - spin_lock_irqsave(&task->task_state_lock, flags); - task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | - SAS_TASK_STATE_PENDING); - spin_unlock_irqrestore(&task->task_state_lock, flags); - } + spin_unlock_irqrestore(&ihost->scic_lock, flags); - /* STP and SMP devices are not sent a TMF, but the - * outstanding I/O request is terminated below. This is - * because SATA/STP and SMP discovery path timeouts directly - * call the abort task interface for cleanup. - */ - perform_termination = 1; - - if (isci_device && !test_bit(IDEV_GONE, &isci_device->flags) && - (isci_remote_device_suspend(isci_host, isci_device) - != SCI_SUCCESS)) { - dev_warn(&isci_host->pdev->dev, - "%s: device = %p; failed to suspend\n", - __func__, isci_device); - goto out; - } + dev_warn(&ihost->pdev->dev, + "%s: %s request" + " or complete_in_target (%d), thus no TMF\n", + __func__, + ((task->task_proto == SAS_PROTOCOL_SMP) + ? "SMP" + : (sas_protocol_ata(task->task_proto) + ? "SATA/STP" + : "") + ), + test_bit(IREQ_COMPLETE_IN_TARGET, + &old_request->flags)); + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + task->task_state_flags |= SAS_TASK_STATE_DONE; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + ret = TMF_RESP_FUNC_COMPLETE; } else { /* Fill in the tmf stucture */ isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort, - isci_abort_task_process_cb, old_request); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - - if (isci_remote_device_suspend(isci_host, isci_device) - != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, - "%s: device = %p; failed to suspend\n", - __func__, isci_device); - goto out; - } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + /* Send the task management request. */ #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */ - ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, + ret = isci_task_execute_tmf(ihost, idev, &tmf, ISCI_ABORT_TASK_TIMEOUT_MS); - - if (ret == TMF_RESP_FUNC_COMPLETE) - perform_termination = 1; - else - dev_warn(&isci_host->pdev->dev, - "%s: isci_task_send_tmf failed\n", __func__); - } - if (perform_termination) { - set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags); - - /* Clean up the request on our side, and wait for the aborted - * I/O to complete. - */ - isci_terminate_request_core(isci_host, isci_device, - old_request); - isci_remote_device_resume(isci_host, isci_device, NULL, NULL); } - - /* Make sure we do not leave a reference to aborted_io_completion */ - old_request->io_request_completion = NULL; - out: - isci_put_device(isci_device); +out: + isci_put_device(idev); return ret; } @@ -1222,14 +689,11 @@ isci_task_request_complete(struct isci_host *ihost, { struct isci_tmf *tmf = isci_request_access_tmf(ireq); struct completion *tmf_complete = NULL; - struct completion *request_complete = ireq->io_request_completion; dev_dbg(&ihost->pdev->dev, "%s: request = %p, status=%d\n", __func__, ireq, completion_status); - isci_request_change_state(ireq, completed); - set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags); if (tmf) { @@ -1253,20 +717,8 @@ isci_task_request_complete(struct isci_host *ihost, */ set_bit(IREQ_TERMINATED, &ireq->flags); - /* As soon as something is in the terminate path, deallocation is - * managed there. Note that the final non-managed state of a task - * request is "completed". - */ - if ((ireq->status == completed) || - !isci_request_is_dealloc_managed(ireq->status)) { - isci_request_change_state(ireq, unallocated); - isci_free_tag(ihost, ireq->io_tag); - list_del_init(&ireq->dev_node); - } - - /* "request_complete" is set if the task was being terminated. */ - if (request_complete) - complete(request_complete); + isci_free_tag(ihost, ireq->io_tag); + list_del_init(&ireq->dev_node); /* The task management part completes last. */ if (tmf_complete) @@ -1277,37 +729,37 @@ static int isci_reset_device(struct isci_host *ihost, struct domain_device *dev, struct isci_remote_device *idev) { - int rc; - enum sci_status status; + int rc = TMF_RESP_FUNC_COMPLETE, reset_stat; struct sas_phy *phy = sas_get_local_phy(dev); struct isci_port *iport = dev->port->lldd_port; dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev); - if (isci_remote_device_reset(ihost, idev) != SCI_SUCCESS) { + /* Suspend the RNC, terminate all outstanding TCs. */ + if (isci_remote_device_suspend_terminate(ihost, idev, NULL) + != SCI_SUCCESS) { rc = TMF_RESP_FUNC_FAILED; goto out; } + /* Note that since the termination for outstanding requests succeeded, + * this function will return success. This is because the resets will + * only fail if the device has been removed (ie. hotplug), and the + * primary duty of this function is to cleanup tasks, so that is the + * relevant status. + */ if (scsi_is_sas_phy_local(phy)) { struct isci_phy *iphy = &ihost->phys[phy->number]; - rc = isci_port_perform_hard_reset(ihost, iport, iphy); + reset_stat = isci_port_perform_hard_reset(ihost, iport, iphy); } else - rc = sas_phy_reset(phy, !dev_is_sata(dev)); + reset_stat = sas_phy_reset(phy, !dev_is_sata(dev)); - /* Terminate in-progress I/O now. */ - isci_remote_device_nuke_requests(ihost, idev); - - /* Since all pending TCs have been cleaned, resume the RNC. */ - status = isci_remote_device_reset_complete(ihost, idev); - - if (status != SCI_SUCCESS) - dev_dbg(&ihost->pdev->dev, - "%s: isci_remote_device_reset_complete(%p) " - "returned %d!\n", __func__, idev, status); + /* Explicitly resume the RNC here, since there was no task sent. */ + isci_remote_device_resume(ihost, idev, NULL, NULL); - dev_dbg(&ihost->pdev->dev, "%s: idev %p complete.\n", __func__, idev); + dev_dbg(&ihost->pdev->dev, "%s: idev %p complete, reset_stat=%d.\n", + __func__, idev, reset_stat); out: sas_put_local_phy(phy); return rc; @@ -1321,7 +773,7 @@ int isci_task_I_T_nexus_reset(struct domain_device *dev) int ret; spin_lock_irqsave(&ihost->scic_lock, flags); - idev = isci_get_device(dev); + idev = isci_get_device(dev->lldd_dev); spin_unlock_irqrestore(&ihost->scic_lock, flags); if (!idev) { diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 7b6d0e32fd9b..9c06cbad1d26 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -62,19 +62,6 @@ struct isci_request; -/** - * enum isci_tmf_cb_state - This enum defines the possible states in which the - * TMF callback function is invoked during the TMF execution process. - * - * - */ -enum isci_tmf_cb_state { - - isci_tmf_init_state = 0, - isci_tmf_started, - isci_tmf_timed_out -}; - /** * enum isci_tmf_function_codes - This enum defines the possible preparations * of task management requests. @@ -87,6 +74,7 @@ enum isci_tmf_function_codes { isci_tmf_ssp_task_abort = TMF_ABORT_TASK, isci_tmf_ssp_lun_reset = TMF_LU_RESET, }; + /** * struct isci_tmf - This class represents the task management object which * acts as an interface to libsas for processing task management requests @@ -106,15 +94,6 @@ struct isci_tmf { u16 io_tag; enum isci_tmf_function_codes tmf_code; int status; - - /* The optional callback function allows the user process to - * track the TMF transmit / timeout conditions. - */ - void (*cb_state_func)( - enum isci_tmf_cb_state, - struct isci_tmf *, void *); - void *cb_data; - }; static inline void isci_print_tmf(struct isci_host *ihost, struct isci_tmf *tmf) @@ -208,113 +187,4 @@ int isci_queuecommand( struct scsi_cmnd *scsi_cmd, void (*donefunc)(struct scsi_cmnd *)); -/** - * enum isci_completion_selection - This enum defines the possible actions to - * take with respect to a given request's notification back to libsas. - * - * - */ -enum isci_completion_selection { - - isci_perform_normal_io_completion, /* Normal notify (task_done) */ - isci_perform_aborted_io_completion, /* No notification. */ - isci_perform_error_io_completion /* Use sas_task_abort */ -}; - -/** - * isci_task_set_completion_status() - This function sets the completion status - * for the request. - * @task: This parameter is the completed request. - * @response: This parameter is the response code for the completed task. - * @status: This parameter is the status code for the completed task. - * -* @return The new notification mode for the request. -*/ -static inline enum isci_completion_selection -isci_task_set_completion_status( - struct sas_task *task, - enum service_response response, - enum exec_status status, - enum isci_completion_selection task_notification_selection) -{ - unsigned long flags; - - spin_lock_irqsave(&task->task_state_lock, flags); - - /* If a device reset is being indicated, make sure the I/O - * is in the error path. - */ - if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) { - /* Fail the I/O to make sure it goes into the error path. */ - response = SAS_TASK_UNDELIVERED; - status = SAM_STAT_TASK_ABORTED; - - task_notification_selection = isci_perform_error_io_completion; - } - task->task_status.resp = response; - task->task_status.stat = status; - - switch (task->task_proto) { - - case SAS_PROTOCOL_SATA: - case SAS_PROTOCOL_STP: - case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: - - if (task_notification_selection - == isci_perform_error_io_completion) { - /* SATA/STP I/O has it's own means of scheduling device - * error handling on the normal path. - */ - task_notification_selection - = isci_perform_normal_io_completion; - } - break; - default: - break; - } - - switch (task_notification_selection) { - - case isci_perform_error_io_completion: - - if (task->task_proto == SAS_PROTOCOL_SMP) { - /* There is no error escalation in the SMP case. - * Convert to a normal completion to avoid the - * timeout in the discovery path and to let the - * next action take place quickly. - */ - task_notification_selection - = isci_perform_normal_io_completion; - - /* Fall through to the normal case... */ - } else { - /* Use sas_task_abort */ - /* Leave SAS_TASK_STATE_DONE clear - * Leave SAS_TASK_AT_INITIATOR set. - */ - break; - } - - case isci_perform_aborted_io_completion: - /* This path can occur with task-managed requests as well as - * requests terminated because of LUN or device resets. - */ - /* Fall through to the normal case... */ - case isci_perform_normal_io_completion: - /* Normal notification (task_done) */ - task->task_state_flags |= SAS_TASK_STATE_DONE; - task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | - SAS_TASK_STATE_PENDING); - break; - default: - WARN_ONCE(1, "unknown task_notification_selection: %d\n", - task_notification_selection); - break; - } - - spin_unlock_irqrestore(&task->task_state_lock, flags); - - return task_notification_selection; - -} #endif /* !defined(_SCI_TASK_H_) */ -- 2.20.1