From 1479e8411831c2112fa83b44664075e3ceea2533 Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Wed, 9 Oct 2013 08:41:57 +0200 Subject: [PATCH] usb: gadget: s3c-hsotg: add isochronous transfers support This patch adds isochronous transfer support. It adds few modifications: - Modify s3c_hsotg_epint() function. Some interrupts are ignored for isochronous endpoints, (e.g. INTknTXFEmpMsk) becouse isochronous request is always transfered in single transaction, which ends with XferCompl interrupt. - Add Odd/Even microframe toggle to allow data transfering in each microframe in s3c_hsotg_epint() function. - Fix s3c_hsotg_ep_enable() function by supporting isochronous endpoint type. Signed-off-by: Robert Baldyga Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 424b2ad00ec7..961abcd71314 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -83,9 +83,11 @@ struct s3c_hsotg_req; * @dir_in: Set to true if this endpoint is of the IN direction, which * means that it is sending data to the Host. * @index: The index for the endpoint registers. + * @interval - Interval for periodic endpoints * @name: The name array passed to the USB core. * @halted: Set if the endpoint has been halted. * @periodic: Set if this is a periodic ep, such as Interrupt + * @isochronous: Set if this is a isochronous ep * @sent_zlp: Set if we've sent a zero-length packet. * @total_data: The total number of data bytes done. * @fifo_size: The size of the FIFO (for periodic IN endpoints) @@ -121,9 +123,11 @@ struct s3c_hsotg_ep { unsigned char dir_in; unsigned char index; + unsigned char interval; unsigned int halted:1; unsigned int periodic:1; + unsigned int isochronous:1; unsigned int sent_zlp:1; char name[10]; @@ -1886,8 +1890,10 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx); u32 ints; + u32 ctrl; ints = readl(hsotg->regs + epint_reg); + ctrl = readl(hsotg->regs + epctl_reg); /* Clear endpoint interrupts */ writel(ints, hsotg->regs + epint_reg); @@ -1896,6 +1902,14 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, __func__, idx, dir_in ? "in" : "out", ints); if (ints & DxEPINT_XferCompl) { + if (hs_ep->isochronous && hs_ep->interval == 1) { + if (ctrl & DxEPCTL_EOFrNum) + ctrl |= DxEPCTL_SetEvenFr; + else + ctrl |= DxEPCTL_SetOddFr; + writel(ctrl, hsotg->regs + epctl_reg); + } + dev_dbg(hsotg->dev, "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n", __func__, readl(hsotg->regs + epctl_reg), @@ -1962,7 +1976,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, if (ints & DxEPINT_Back2BackSetup) dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); - if (dir_in) { + if (dir_in && !hs_ep->isochronous) { /* not sure if this is important, but we'll clear it anyway */ if (ints & DIEPMSK_INTknTXFEmpMsk) { dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", @@ -2581,13 +2595,18 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps); /* default, set to non-periodic */ + hs_ep->isochronous = 0; hs_ep->periodic = 0; + hs_ep->interval = desc->bInterval; switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_ISOC: - dev_err(hsotg->dev, "no current ISOC support\n"); - ret = -EINVAL; - goto out; + epctrl |= DxEPCTL_EPType_Iso; + epctrl |= DxEPCTL_SetEvenFr; + hs_ep->isochronous = 1; + if (dir_in) + hs_ep->periodic = 1; + break; case USB_ENDPOINT_XFER_BULK: epctrl |= DxEPCTL_EPType_Bulk; -- 2.20.1