From 1384a147b11d7377df4009bbefc8706471a12784 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 6 Jul 2016 17:10:48 +0800 Subject: [PATCH] ARM: dts: sun7i: bananapi-m1-plus: red LED is power LED The red led on the Bananapi M1+ is wired to light up as soon as the board is powered, and continues to be lit while the GPIO is floating. Rename the LED to "pwr", remove the default trigger, and mark it as default on. Also fix the pinmux node that was specifying a different pin for this LED. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 14fb463758e4..ba5bca0fe997 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -70,12 +70,11 @@ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; - red { - label = "bananapi-m1-plus:red:usr"; + pwr { + label = "bananapi-m1-plus:pwr:usr"; gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; + default-state = "on"; }; - }; mmc3_pwrseq: mmc3_pwrseq { @@ -202,7 +201,7 @@ }; led_pins_bpi_m1p: led_pins@0 { - allwinner,pins = "PH24", "PG2"; + allwinner,pins = "PH24", "PH25"; allwinner,function = "gpio_out"; allwinner,drive = ; allwinner,pull = ; -- 2.20.1