From 13225977f5429fc5a8c0c1933e3283ab4c7042d8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 5 Sep 2011 07:43:49 +0000 Subject: [PATCH] sfc: Use correct fields of struct ethtool_coalesce An earlier developer misunderstood the meaning of the 'irq' fields and the driver did not support the standard fields. To avoid invalidating existing user documentation, we report and accept changes through either the standard or 'irq' fields. If both are changed at the same time, we prefer the standard field. Also explain why we don't currently use the 'max_frames' fields. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ethtool.c | 36 ++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c index 98b363bb4a75..93f1fb99432d 100644 --- a/drivers/net/ethernet/sfc/ethtool.c +++ b/drivers/net/ethernet/sfc/ethtool.c @@ -595,6 +595,20 @@ static int efx_ethtool_nway_reset(struct net_device *net_dev) * automatically changed too, but otherwise we fail if the two values * are requested to be different. * + * The hardware does not support a limit on the number of completions + * before an IRQ, so we do not use the max_frames fields. We should + * report and require that max_frames == (usecs != 0), but this would + * invalidate existing user documentation. + * + * The hardware does not have distinct settings for interrupt + * moderation while the previous IRQ is being handled, so we should + * not use the 'irq' fields. However, an earlier developer + * misunderstood the meaning of the 'irq' fields and the driver did + * not support the standard fields. To avoid invalidating existing + * user documentation, we report and accept changes through either the + * standard or 'irq' fields. If both are changed at the same time, we + * prefer the standard field. + * * We implement adaptive IRQ moderation, but use a different algorithm * from that assumed in the definition of struct ethtool_coalesce. * Therefore we do not use any of the adaptive moderation parameters @@ -610,7 +624,9 @@ static int efx_ethtool_get_coalesce(struct net_device *net_dev, efx_get_irq_moderation(efx, &tx_usecs, &rx_usecs, &rx_adaptive); + coalesce->tx_coalesce_usecs = tx_usecs; coalesce->tx_coalesce_usecs_irq = tx_usecs; + coalesce->rx_coalesce_usecs = rx_usecs; coalesce->rx_coalesce_usecs_irq = rx_usecs; coalesce->use_adaptive_rx_coalesce = rx_adaptive; @@ -629,22 +645,24 @@ static int efx_ethtool_set_coalesce(struct net_device *net_dev, if (coalesce->use_adaptive_tx_coalesce) return -EINVAL; - if (coalesce->rx_coalesce_usecs || coalesce->tx_coalesce_usecs) { - netif_err(efx, drv, efx->net_dev, "invalid coalescing setting. " - "Only rx/tx_coalesce_usecs_irq are supported\n"); - return -EINVAL; - } - efx_get_irq_moderation(efx, &tx_usecs, &rx_usecs, &adaptive); - rx_usecs = coalesce->rx_coalesce_usecs_irq; + if (coalesce->rx_coalesce_usecs != rx_usecs) + rx_usecs = coalesce->rx_coalesce_usecs; + else + rx_usecs = coalesce->rx_coalesce_usecs_irq; + adaptive = coalesce->use_adaptive_rx_coalesce; /* If channels are shared, TX IRQ moderation can be quietly * overridden unless it is changed from its old value. */ - rx_may_override_tx = coalesce->tx_coalesce_usecs_irq == tx_usecs; - tx_usecs = coalesce->tx_coalesce_usecs_irq; + rx_may_override_tx = (coalesce->tx_coalesce_usecs == tx_usecs && + coalesce->tx_coalesce_usecs_irq == tx_usecs); + if (coalesce->tx_coalesce_usecs != tx_usecs) + tx_usecs = coalesce->tx_coalesce_usecs; + else + tx_usecs = coalesce->tx_coalesce_usecs_irq; rc = efx_init_irq_moderation(efx, tx_usecs, rx_usecs, adaptive, rx_may_override_tx); -- 2.20.1