From 12c0b20fa4afb5c8a377d6987fb2dcf353e1dce1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 23 Jul 2008 17:00:13 -0600 Subject: [PATCH] x86/PCI: use dev_printk when possible Convert printks to use dev_printk(). I converted DBG() to dev_dbg(). This DBG() is from arch/x86/pci/pci.h and requires source-code modification to enable, so dev_dbg() seems roughly equivalent. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- arch/x86/pci/fixup.c | 3 +- arch/x86/pci/i386.c | 26 +++++----- arch/x86/pci/irq.c | 106 ++++++++++++++++++---------------------- arch/x86/pci/numaq_32.c | 5 +- 4 files changed, 64 insertions(+), 76 deletions(-) diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index ff3a6a336342..4bdaa590375d 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -23,7 +23,8 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d) pci_read_config_byte(d, reg++, &busno); pci_read_config_byte(d, reg++, &suba); pci_read_config_byte(d, reg++, &subb); - DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb); + dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, + suba, subb); if (busno) pci_scan_bus_with_sysdata(busno); /* Bus A */ if (suba < subb) diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index a09505806b82..5807d1bc73f7 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -128,10 +128,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) pr = pci_find_parent_resource(dev, r); if (!r->start || !pr || request_resource(pr, r) < 0) { - printk(KERN_ERR "PCI: Cannot allocate " - "resource region %d " - "of bridge %s\n", - idx, pci_name(dev)); + dev_err(&dev->dev, "BAR %d: can't " + "allocate resource\n", idx); /* * Something is wrong with the region. * Invalidate the resource to prevent @@ -166,15 +164,15 @@ static void __init pcibios_allocate_resources(int pass) else disabled = !(command & PCI_COMMAND_MEMORY); if (pass == disabled) { - DBG("PCI: Resource %08lx-%08lx " - "(f=%lx, d=%d, p=%d)\n", - r->start, r->end, r->flags, disabled, pass); + dev_dbg(&dev->dev, "resource %#08llx-%#08llx " + "(f=%lx, d=%d, p=%d)\n", + (unsigned long long) r->start, + (unsigned long long) r->end, + r->flags, disabled, pass); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { - printk(KERN_ERR "PCI: Cannot allocate " - "resource region %d " - "of device %s\n", - idx, pci_name(dev)); + dev_err(&dev->dev, "BAR %d: can't " + "allocate resource\n", idx); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; @@ -187,8 +185,7 @@ static void __init pcibios_allocate_resources(int pass) /* Turn the ROM off, leave the resource region, * but keep it unregistered. */ u32 reg; - DBG("PCI: Switching off ROM of %s\n", - pci_name(dev)); + dev_dbg(&dev->dev, "disabling ROM\n"); r->flags &= ~IORESOURCE_ROM_ENABLE; pci_read_config_dword(dev, dev->rom_base_reg, ®); @@ -257,8 +254,7 @@ void pcibios_set_master(struct pci_dev *dev) lat = pcibios_max_latency; else return; - printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); + dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat); pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); } diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 6a06a2eb0597..fec0123b33a9 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -436,7 +436,7 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { WARN_ON_ONCE(pirq >= 9); if (pirq > 8) { - printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq); + dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); return 0; } return read_config_nybble(router, 0x74, pirq-1); @@ -446,7 +446,7 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, { WARN_ON_ONCE(pirq >= 9); if (pirq > 8) { - printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq); + dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); return 0; } write_config_nybble(router, 0x74, pirq-1, irq); @@ -492,15 +492,17 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq irq = 0; if (pirq <= 4) irq = read_config_nybble(router, 0x56, pirq - 1); - printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n", - dev->vendor, dev->device, pirq, irq); + dev_info(&dev->dev, + "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n", + dev->vendor, dev->device, pirq, irq); return irq; } static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { - printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", - dev->vendor, dev->device, pirq, irq); + dev_info(&dev->dev, + "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n", + dev->vendor, dev->device, pirq, irq); if (pirq <= 4) write_config_nybble(router, 0x56, pirq - 1, irq); return 1; @@ -730,7 +732,6 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, switch (device) { case PCI_DEVICE_ID_AL_M1533: case PCI_DEVICE_ID_AL_M1563: - printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n"); r->name = "ALI"; r->get = pirq_ali_get; r->set = pirq_ali_set; @@ -840,11 +841,9 @@ static void __init pirq_find_router(struct irq_router *r) h->probe(r, pirq_router_dev, pirq_router_dev->device)) break; } - printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n", - pirq_router.name, - pirq_router_dev->vendor, - pirq_router_dev->device, - pci_name(pirq_router_dev)); + dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n", + pirq_router.name, + pirq_router_dev->vendor, pirq_router_dev->device); /* The device remains referenced for the kernel lifetime */ } @@ -877,7 +876,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) /* Find IRQ pin */ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (!pin) { - DBG(KERN_DEBUG " -> no interrupt pin\n"); + dev_dbg(&dev->dev, "no interrupt pin\n"); return 0; } pin = pin - 1; @@ -887,20 +886,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) if (!pirq_table) return 0; - DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin); info = pirq_get_info(dev); if (!info) { - DBG(" -> not found in routing table\n" KERN_DEBUG); + dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n", + 'A' + pin); return 0; } pirq = info->irq[pin].link; mask = info->irq[pin].bitmap; if (!pirq) { - DBG(" -> not routed\n" KERN_DEBUG); + dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin); return 0; } - DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, - pirq_table->exclusive_irqs); + dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x", + 'A' + pin, pirq, mask, pirq_table->exclusive_irqs); mask &= pcibios_irq_mask; /* Work around broken HP Pavilion Notebooks which assign USB to @@ -930,10 +929,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) if (pci_probe & PCI_USE_PIRQ_MASK) newirq = 0; else - printk("\n" KERN_WARNING - "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n" - KERN_DEBUG, newirq, - pci_name(dev)); + dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask " + "%#x; try pci=usepirqmask\n", newirq, mask); } if (!newirq && assign) { for (i = 0; i < 16; i++) { @@ -944,39 +941,35 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) newirq = i; } } - DBG(" -> newirq=%d", newirq); + dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq); /* Check if it is hardcoded */ if ((pirq & 0xf0) == 0xf0) { irq = pirq & 0xf; - DBG(" -> hardcoded IRQ %d\n", irq); - msg = "Hardcoded"; + msg = "hardcoded"; } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) { - DBG(" -> got IRQ %d\n", irq); - msg = "Found"; + msg = "found"; eisa_set_level_irq(irq); } else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { - DBG(" -> assigning IRQ %d", newirq); if (r->set(pirq_router_dev, dev, pirq, newirq)) { eisa_set_level_irq(newirq); - DBG(" ... OK\n"); - msg = "Assigned"; + msg = "assigned"; irq = newirq; } } if (!irq) { - DBG(" ... failed\n"); if (newirq && mask == (1 << newirq)) { - msg = "Guessed"; + msg = "guessed"; irq = newirq; - } else + } else { + dev_dbg(&dev->dev, "can't route interrupt\n"); return 0; + } } - printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, - pci_name(dev)); + dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq); /* Update IRQ for all devices with the same pirq value */ while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) { @@ -996,17 +989,17 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) (!(pci_probe & PCI_USE_PIRQ_MASK) || \ ((1 << dev2->irq) & mask))) { #ifndef CONFIG_PCI_MSI - printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n", - pci_name(dev2), dev2->irq, irq); + dev_info(&dev2->dev, "IRQ routing conflict: " + "have IRQ %d, want IRQ %d\n", + dev2->irq, irq); #endif continue; } dev2->irq = irq; pirq_penalty[irq]++; if (dev != dev2) - printk(KERN_INFO - "PCI: Sharing IRQ %d with %s\n", - irq, pci_name(dev2)); + dev_info(&dev->dev, "sharing IRQ %d with %s\n", + irq, pci_name(dev2)); } } return 1; @@ -1025,8 +1018,7 @@ static void __init pcibios_fixup_irqs(void) * already in use. */ if (dev->irq >= 16) { - DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", - pci_name(dev), dev->irq); + dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq); dev->irq = 0; } /* @@ -1070,12 +1062,12 @@ static void __init pcibios_fixup_irqs(void) irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), pin); if (irq >= 0) - printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", - pci_name(bridge), 'A' + pin, irq); + dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n", + pci_name(bridge), + 'A' + pin, irq); } if (irq >= 0) { - printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", - pci_name(dev), 'A' + pin, irq); + dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq); dev->irq = irq; } } @@ -1231,25 +1223,24 @@ static int pirq_enable_irq(struct pci_dev *dev) irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), pin); if (irq >= 0) - printk(KERN_WARNING - "PCI: using PPB %s[%c] to get irq %d\n", - pci_name(bridge), - 'A' + pin, irq); + dev_warn(&dev->dev, "using bridge %s " + "INT %c to get IRQ %d\n", + pci_name(bridge), 'A' + pin, + irq); dev = bridge; } dev = temp_dev; if (irq >= 0) { - printk(KERN_INFO - "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", - pci_name(dev), 'A' + pin, irq); + dev_info(&dev->dev, "PCI->APIC IRQ transform: " + "INT %c -> IRQ %d\n", 'A' + pin, irq); dev->irq = irq; return 0; } else - msg = " Probably buggy MP table."; + msg = "; probably buggy MP table"; } else if (pci_probe & PCI_BIOS_IRQ_SCAN) msg = ""; else - msg = " Please try using pci=biosirq."; + msg = "; please try using pci=biosirq"; /* * With IDE legacy devices the IRQ lookup failure is not @@ -1259,9 +1250,8 @@ static int pirq_enable_irq(struct pci_dev *dev) !(dev->class & 0x5)) return 0; - printk(KERN_WARNING - "PCI: No IRQ known for interrupt pin %c of device %s.%s\n", - 'A' + pin, pci_name(dev), msg); + dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n", + 'A' + pin, msg); } return 0; } diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c index f4b16dc11dad..1177845d3186 100644 --- a/arch/x86/pci/numaq_32.c +++ b/arch/x86/pci/numaq_32.c @@ -131,13 +131,14 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d) u8 busno, suba, subb; int quad = BUS2QUAD(d->bus->number); - printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d)); + dev_info(&d->dev, "searching for i450NX host bridges\n"); reg = 0xd0; for(pxb=0; pxb<2; pxb++) { pci_read_config_byte(d, reg++, &busno); pci_read_config_byte(d, reg++, &suba); pci_read_config_byte(d, reg++, &subb); - DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb); + dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", + pxb, busno, suba, subb); if (busno) { /* Bus A */ pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno)); -- 2.20.1