From 11aad99af6ef629ff3b05d1c9f0936589b204316 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 15 Feb 2012 20:43:11 +0000 Subject: [PATCH] atl1c: dont use highprio tx queue This driver attempts to use two TX rings but lacks proper support : 1) IRQ handler only takes care of TX completion on first TX ring 2) the stop/start logic uses the legacy functions (for non multiqueue drivers) This means all packets witk skb mark set to 1 are sent through high queue but are never cleaned and queue eventualy fills and block the device, triggering the infamous "NETDEV WATCHDOG" message. Lets use a single TX ring to fix the problem, this driver is not a real multiqueue one yet. Minimal fix for stable kernels. Reported-by: Thomas Meyer Tested-by: Thomas Meyer Signed-off-by: Eric Dumazet Cc: Jay Cliburn Cc: Chris Snook Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index b8591246eb4c..1ff3c6df35a2 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -2244,10 +2244,6 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb, dev_info(&adapter->pdev->dev, "tx locked\n"); return NETDEV_TX_LOCKED; } - if (skb->mark == 0x01) - type = atl1c_trans_high; - else - type = atl1c_trans_normal; if (atl1c_tpd_avail(adapter, type) < tpd_req) { /* no enough descriptor, just stop queue */ -- 2.20.1