From 11826e5dc7b7297164dd9dd6d735c6ff6acb4b86 Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 8 Apr 2016 17:23:13 +0800 Subject: [PATCH] hisi_sas: add v2 hw support for >4 SATA phys This patch adds support for directly attaching SATA disks to phy 4-8. The problem was that only registers concerned with phy 0-3 were being considered in sata_int_v2_hw(). The issue was not detected previously as the development board only exposed phy 0-3; the new board provides access to 8 phys. Signed-off-by: John Garry Reviewed-by: Zhangfei Gao Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 5a7f7092018a..cc083b9b1041 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -1993,17 +1993,20 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p) u32 ent_tmp, ent_msk, ent_int, port_id, link_rate, hard_phy_linkrate; irqreturn_t res = IRQ_HANDLED; u8 attached_sas_addr[SAS_ADDR_SIZE] = {0}; - int phy_no; + int phy_no, offset; phy_no = sas_phy->id; initial_fis = &hisi_hba->initial_fis[phy_no]; fis = &initial_fis->fis; - ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK1); - hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk | 1 << phy_no); + offset = 4 * (phy_no / 4); + ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK1 + offset); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset, + ent_msk | 1 << ((phy_no % 4) * 8)); - ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1); - ent_tmp = ent_int & (1 << (ENT_INT_SRC1_D2H_FIS_CH1_OFF * phy_no)); + ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1 + offset); + ent_tmp = ent_int & (1 << (ENT_INT_SRC1_D2H_FIS_CH1_OFF * + (phy_no % 4))); ent_int >>= ENT_INT_SRC1_D2H_FIS_CH1_OFF * (phy_no % 4); if ((ent_int & ENT_INT_SRC1_D2H_FIS_CH0_MSK) == 0) { dev_warn(dev, "sata int: phy%d did not receive FIS\n", phy_no); @@ -2054,8 +2057,8 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p) queue_work(hisi_hba->wq, &phy->phyup_ws); end: - hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp); - hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk); + hisi_sas_write32(hisi_hba, ENT_INT_SRC1 + offset, ent_tmp); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset, ent_msk); return res; } -- 2.20.1