From 113c74d83eef870e43a0d9279044e9d5435f0d07 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 14 Jan 2016 21:57:18 +0100 Subject: [PATCH] net: phy: turn carrier off on phy attach The operstate of a networking device initially IF_OPER_UNKNOWN aka "unknown", updated on carrier state changes (with carrier state being on by default). This means it will stay unknown unless the carrier state goes to off at some point, which is not the case if the phy is already up/connected at startup. Explicitly turn off the carrier on phy attach, leaving the phy state machine to turn the carrier on when it has done the initial negotiation. Signed-off-by: Sjoerd Simons Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 903737adfc01..bad3f005faee 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -901,6 +901,11 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, phydev->state = PHY_READY; + /* Initial carrier state is off as the phy is about to be + * (re)initialized. + */ + netif_carrier_off(phydev->attached_dev); + /* Do initial configuration here, now that * we have certain key parameters * (dev_flags and interface) -- 2.20.1