From 10fe5888a40e6afbf1f3166c212c685624cae26b Mon Sep 17 00:00:00 2001 From: "subhashj@codeaurora.org" Date: Wed, 23 Nov 2016 16:31:52 -0800 Subject: [PATCH] scsi: ufs: increase the scsi query response timeout It is found thats UFS device may take longer than 30ms to respond to query requests and in this case we might run into following scenario: 1. UFS host SW sends a query request to UFS device to read an attribute value. SW uses tag #31 for this purpose. 2. UFS host SW waits for 30ms to get the query response (and doorbell to be cleared by UFS host HW). 3. UFS device doesn't respond back within 30ms hence UFS host SW times out waiting for the query response. 4. UFS host SW clears the tag#31 from UTRLCLR register. 5. UFS host SW waits until UFS host HW to clear tag#31 from the doorbell register. 6. UFS host SW retries the same query request on same tag#31 (sends a query request to device to read an attribute value). 7. UFS host HW gets the query response from the device but this was intended as a query response for the 1st query request sent (step-1). 8. Now UFS device sends another query response to host (for query request sent @step-6). Now there are 2 issues that could happen with above scenario: 1. UFS device should have actually responded back with only one query response but it is found that device may respond back with 2 query responses. 2. If UFS device responds back with 2 resposes on same tag, host HW/SW behaviour isn't predictable. To avoid running into above scenario, we would basically allow device to take longer (upto 1.5 seconds) for query response. Reviewed-by: Gilad Broner Signed-off-by: Subhash Jadavani Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index d6e87dc472c4..393f6d55df5a 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -59,15 +59,9 @@ #define NOP_OUT_TIMEOUT 30 /* msecs */ /* Query request retries */ -#define QUERY_REQ_RETRIES 10 +#define QUERY_REQ_RETRIES 3 /* Query request timeout */ -#define QUERY_REQ_TIMEOUT 30 /* msec */ -/* - * Query request timeout for fDeviceInit flag - * fDeviceInit query response time for some devices is too large that default - * QUERY_REQ_TIMEOUT may not be enough for such devices. - */ -#define QUERY_FDEVICEINIT_REQ_TIMEOUT 600 /* msec */ +#define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */ /* Task management command timeout */ #define TM_CMD_TIMEOUT 100 /* msecs */ @@ -1842,9 +1836,6 @@ int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode, goto out_unlock; } - if (idn == QUERY_FLAG_IDN_FDEVICEINIT) - timeout = QUERY_FDEVICEINIT_REQ_TIMEOUT; - err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, timeout); if (err) { -- 2.20.1