From 10f27014f42f0a4cb32bf45f214fa7ad7c261b1e Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 21 Sep 2009 15:29:59 -0400 Subject: [PATCH] Staging: comedi: s526: Fix number of channels on DIO subdevice Correct operation of INSN_CONFIG_DIO_INPUT and INSN_CONFIG_DIO_OUTPUT and support INSN_CONFIG_DIO_QUERY. Thanks to Alessio Margan for some testing. Signed-off-by: Frank Mori Hess Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/s526.c | 35 +++++++++++++++------------ 1 file changed, 20 insertions(+), 15 deletions(-) diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c index b89e1ec267c5..736441f3c815 100644 --- a/drivers/staging/comedi/drivers/s526.c +++ b/drivers/staging/comedi/drivers/s526.c @@ -375,7 +375,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (thisboard->have_dio) { s->type = COMEDI_SUBD_DIO; s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 2; + s->n_chan = 8; s->maxdata = 1; s->range_table = &range_digital; s->insn_bits = s526_dio_insn_bits; @@ -949,7 +949,7 @@ static int s526_dio_insn_bits(struct comedi_device *dev, data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; /* low 8 bits are the data */ /* or we could just return the software copy of the output values if * it was a purely digital output subdevice */ - /* data[1]=s->state; */ + /* data[1]=s->state & 0xFF; */ return 2; } @@ -959,28 +959,33 @@ static int s526_dio_insn_config(struct comedi_device *dev, struct comedi_insn *insn, unsigned int *data) { int chan = CR_CHAN(insn->chanspec); - short value; + int group, mask; printk("S526 DIO insn_config\n"); - if (insn->n != 1) - return -EINVAL; - - value = inw(ADDR_REG(REG_DIO)); - /* The input or output configuration of each digital line is * configured by a special insn_config instruction. chanspec * contains the channel to be changed, and data[0] contains the * value COMEDI_INPUT or COMEDI_OUTPUT. */ - if (data[0] == COMEDI_OUTPUT) { - value |= 1 << (chan + 10); /* bit 10/11 set the group 1/2's mode */ - s->io_bits |= (0xF << chan); - } else { - value &= ~(1 << (chan + 10)); /* 1 is output, 0 is input. */ - s->io_bits &= ~(0xF << chan); + group = chan >> 2; + mask = 0xF << (group << 2); + switch (data[0]) { + case INSN_CONFIG_DIO_OUTPUT: + s->state |= 1 << (group + 10); // bit 10/11 set the group 1/2's mode + s->io_bits |= mask; + break; + case INSN_CONFIG_DIO_INPUT: + s->state &= ~(1 << (group + 10));// 1 is output, 0 is input. + s->io_bits &= ~mask; + break; + case INSN_CONFIG_DIO_QUERY: + data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT; + return insn->n; + default: + return -EINVAL; } - outw(value, ADDR_REG(REG_DIO)); + outw(s->state, ADDR_REG(REG_DIO)); return 1; } -- 2.20.1