From 10f00a49b048abf759b789a84c4c3431360aa38f Mon Sep 17 00:00:00 2001 From: Mark Einon Date: Tue, 23 Aug 2011 23:40:37 +0100 Subject: [PATCH] staging: et131x: Rename var name 'etdev' to 'adapter' throughout module Used regex (from vim) :%s/\/adapter/g Changed because: * 'etdev' is easily confused as a misspelling of 'netdev' * 'adapter' is more widely used for this struct type in net drivers. This change made comparing code with other drivers much easier. Signed-off-by: Mark Einon Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/et1310_eeprom.c | 32 +- drivers/staging/et131x/et1310_mac.c | 206 ++++++------- drivers/staging/et131x/et1310_phy.c | 390 ++++++++++++------------ drivers/staging/et131x/et1310_pm.c | 44 +-- drivers/staging/et131x/et1310_rx.c | 174 +++++------ drivers/staging/et131x/et1310_tx.c | 254 +++++++-------- drivers/staging/et131x/et131x_initpci.c | 136 ++++----- drivers/staging/et131x/et131x_isr.c | 46 +-- drivers/staging/et131x/et131x_netdev.c | 26 +- 9 files changed, 654 insertions(+), 654 deletions(-) diff --git a/drivers/staging/et131x/et1310_eeprom.c b/drivers/staging/et131x/et1310_eeprom.c index 237584001a8f..e8102547e133 100644 --- a/drivers/staging/et131x/et1310_eeprom.c +++ b/drivers/staging/et131x/et1310_eeprom.c @@ -150,15 +150,15 @@ static int eeprom_wait_ready(struct pci_dev *pdev, u32 *status) /** * eeprom_write - Write a byte to the ET1310's EEPROM - * @etdev: pointer to our private adapter structure + * @adapter: pointer to our private adapter structure * @addr: the address to write * @data: the value to write * * Returns 1 for a successful write. */ -static int eeprom_write(struct et131x_adapter *etdev, u32 addr, u8 data) +static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) { - struct pci_dev *pdev = etdev->pdev; + struct pci_dev *pdev = adapter->pdev; int index = 0; int retries; int err = 0; @@ -222,7 +222,7 @@ static int eeprom_write(struct et131x_adapter *etdev, u32 addr, u8 data) * 1, this is so we do a blind write for load bug. */ if ((status & LBCIF_STATUS_GENERAL_ERROR) - && etdev->pdev->revision == 0) + && adapter->pdev->revision == 0) break; /* @@ -280,7 +280,7 @@ static int eeprom_write(struct et131x_adapter *etdev, u32 addr, u8 data) /** * eeprom_read - Read a byte from the ET1310's EEPROM - * @etdev: pointer to our private adapter structure + * @adapter: pointer to our private adapter structure * @addr: the address from which to read * @pdata: a pointer to a byte in which to store the value of the read * @eeprom_id: the ID of the EEPROM @@ -288,9 +288,9 @@ static int eeprom_write(struct et131x_adapter *etdev, u32 addr, u8 data) * * Returns 1 for a successful read */ -static int eeprom_read(struct et131x_adapter *etdev, u32 addr, u8 *pdata) +static int eeprom_read(struct et131x_adapter *adapter, u32 addr, u8 *pdata) { - struct pci_dev *pdev = etdev->pdev; + struct pci_dev *pdev = adapter->pdev; int err; u32 status; @@ -337,9 +337,9 @@ static int eeprom_read(struct et131x_adapter *etdev, u32 addr, u8 *pdata) return (status & LBCIF_STATUS_ACK_ERROR) ? -EIO : 0; } -int et131x_init_eeprom(struct et131x_adapter *etdev) +int et131x_init_eeprom(struct et131x_adapter *adapter) { - struct pci_dev *pdev = etdev->pdev; + struct pci_dev *pdev = adapter->pdev; u8 eestatus; /* We first need to check the EEPROM Status code located at offset @@ -374,7 +374,7 @@ int et131x_init_eeprom(struct et131x_adapter *etdev) * corruption seen with 1310 B Silicon */ for (i = 0; i < 3; i++) - if (eeprom_write(etdev, i, eedata[i]) < 0) + if (eeprom_write(adapter, i, eedata[i]) < 0) write_failed = 1; } if (pdev->revision != 0x01 || write_failed) { @@ -387,21 +387,21 @@ int et131x_init_eeprom(struct et131x_adapter *etdev) * gather additional information that normally would * come from the eeprom, like MAC Address */ - etdev->has_eeprom = 0; + adapter->has_eeprom = 0; return -EIO; } } - etdev->has_eeprom = 1; + adapter->has_eeprom = 1; /* Read the EEPROM for information regarding LED behavior. Refer to * ET1310_phy.c, et131x_xcvr_init(), for its use. */ - eeprom_read(etdev, 0x70, &etdev->eeprom_data[0]); - eeprom_read(etdev, 0x71, &etdev->eeprom_data[1]); + eeprom_read(adapter, 0x70, &adapter->eeprom_data[0]); + eeprom_read(adapter, 0x71, &adapter->eeprom_data[1]); - if (etdev->eeprom_data[0] != 0xcd) + if (adapter->eeprom_data[0] != 0xcd) /* Disable all optional features */ - etdev->eeprom_data[1] = 0x00; + adapter->eeprom_data[1] = 0x00; return 0; } diff --git a/drivers/staging/et131x/et1310_mac.c b/drivers/staging/et131x/et1310_mac.c index 8e124fe5b9d1..ab85cb3babdc 100644 --- a/drivers/staging/et131x/et1310_mac.c +++ b/drivers/staging/et131x/et1310_mac.c @@ -100,11 +100,11 @@ /** * et1310_config_mac_regs1 - Initialize the first part of MAC regs - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure */ -void et1310_config_mac_regs1(struct et131x_adapter *etdev) +void et1310_config_mac_regs1(struct et131x_adapter *adapter) { - struct mac_regs __iomem *macregs = &etdev->regs->mac; + struct mac_regs __iomem *macregs = &adapter->regs->mac; u32 station1; u32 station2; u32 ipg; @@ -136,12 +136,12 @@ void et1310_config_mac_regs1(struct et131x_adapter *etdev) * station address is used for generating and checking pause control * packets. */ - station2 = (etdev->addr[1] << ET_MAC_STATION_ADDR2_OC2_SHIFT) | - (etdev->addr[0] << ET_MAC_STATION_ADDR2_OC1_SHIFT); - station1 = (etdev->addr[5] << ET_MAC_STATION_ADDR1_OC6_SHIFT) | - (etdev->addr[4] << ET_MAC_STATION_ADDR1_OC5_SHIFT) | - (etdev->addr[3] << ET_MAC_STATION_ADDR1_OC4_SHIFT) | - etdev->addr[2]; + station2 = (adapter->addr[1] << ET_MAC_STATION_ADDR2_OC2_SHIFT) | + (adapter->addr[0] << ET_MAC_STATION_ADDR2_OC1_SHIFT); + station1 = (adapter->addr[5] << ET_MAC_STATION_ADDR1_OC6_SHIFT) | + (adapter->addr[4] << ET_MAC_STATION_ADDR1_OC5_SHIFT) | + (adapter->addr[3] << ET_MAC_STATION_ADDR1_OC4_SHIFT) | + adapter->addr[2]; writel(station1, ¯egs->station_addr_1); writel(station2, ¯egs->station_addr_2); @@ -152,7 +152,7 @@ void et1310_config_mac_regs1(struct et131x_adapter *etdev) * Packets larger than (registry_jumbo_packet) that do not contain a * VLAN ID will be dropped by the Rx function. */ - writel(etdev->registry_jumbo_packet + 4, ¯egs->max_fm_len); + writel(adapter->registry_jumbo_packet + 4, ¯egs->max_fm_len); /* clear out MAC config reset */ writel(0, ¯egs->cfg1); @@ -160,25 +160,25 @@ void et1310_config_mac_regs1(struct et131x_adapter *etdev) /** * et1310_config_mac_regs2 - Initialize the second part of MAC regs - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure */ -void et1310_config_mac_regs2(struct et131x_adapter *etdev) +void et1310_config_mac_regs2(struct et131x_adapter *adapter) { int32_t delay = 0; - struct mac_regs __iomem *mac = &etdev->regs->mac; + struct mac_regs __iomem *mac = &adapter->regs->mac; u32 cfg1; u32 cfg2; u32 ifctrl; u32 ctl; - ctl = readl(&etdev->regs->txmac.ctl); + ctl = readl(&adapter->regs->txmac.ctl); cfg1 = readl(&mac->cfg1); cfg2 = readl(&mac->cfg2); ifctrl = readl(&mac->if_ctrl); /* Set up the if mode bits */ cfg2 &= ~0x300; - if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS) { + if (adapter->linkspeed == TRUEPHY_SPEED_1000MBPS) { cfg2 |= 0x200; /* Phy mode bit */ ifctrl &= ~(1 << 24); @@ -191,7 +191,7 @@ void et1310_config_mac_regs2(struct et131x_adapter *etdev) cfg1 |= CFG1_RX_ENABLE | CFG1_TX_ENABLE | CFG1_TX_FLOW; /* Initialize loop back to off */ cfg1 &= ~(CFG1_LOOPBACK | CFG1_RX_FLOW); - if (etdev->flowcontrol == FLOW_RXONLY || etdev->flowcontrol == FLOW_BOTH) + if (adapter->flowcontrol == FLOW_RXONLY || adapter->flowcontrol == FLOW_BOTH) cfg1 |= CFG1_RX_FLOW; writel(cfg1, &mac->cfg1); @@ -202,11 +202,11 @@ void et1310_config_mac_regs2(struct et131x_adapter *etdev) cfg2 &= ~0x0021; /* Turn on duplex if needed */ - if (etdev->duplex_mode) + if (adapter->duplex_mode) cfg2 |= 0x01; ifctrl &= ~(1 << 26); - if (!etdev->duplex_mode) + if (!adapter->duplex_mode) ifctrl |= (1<<26); /* Enable ghd */ writel(ifctrl, &mac->if_ctrl); @@ -219,25 +219,25 @@ void et1310_config_mac_regs2(struct et131x_adapter *etdev) } while ((cfg1 & CFG1_WAIT) != CFG1_WAIT && delay < 100); if (delay == 100) { - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "Syncd bits did not respond correctly cfg1 word 0x%08x\n", cfg1); } /* Enable txmac */ ctl |= 0x09; /* TX mac enable, FC disable */ - writel(ctl, &etdev->regs->txmac.ctl); + writel(ctl, &adapter->regs->txmac.ctl); /* Ready to start the RXDMA/TXDMA engine */ - if (etdev->flags & fMP_ADAPTER_LOWER_POWER) { - et131x_rx_dma_enable(etdev); - et131x_tx_dma_enable(etdev); + if (adapter->flags & fMP_ADAPTER_LOWER_POWER) { + et131x_rx_dma_enable(adapter); + et131x_tx_dma_enable(adapter); } } -void et1310_config_rxmac_regs(struct et131x_adapter *etdev) +void et1310_config_rxmac_regs(struct et131x_adapter *adapter) { - struct rxmac_regs __iomem *rxmac = &etdev->regs->rxmac; + struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; u32 sa_lo; u32 sa_hi = 0; u32 pf_ctrl = 0; @@ -280,22 +280,22 @@ void et1310_config_rxmac_regs(struct et131x_adapter *etdev) writel(0, &rxmac->mask4_word3); /* Lets setup the WOL Source Address */ - sa_lo = (etdev->addr[2] << ET_WOL_LO_SA3_SHIFT) | - (etdev->addr[3] << ET_WOL_LO_SA4_SHIFT) | - (etdev->addr[4] << ET_WOL_LO_SA5_SHIFT) | - etdev->addr[5]; + sa_lo = (adapter->addr[2] << ET_WOL_LO_SA3_SHIFT) | + (adapter->addr[3] << ET_WOL_LO_SA4_SHIFT) | + (adapter->addr[4] << ET_WOL_LO_SA5_SHIFT) | + adapter->addr[5]; writel(sa_lo, &rxmac->sa_lo); - sa_hi = (u32) (etdev->addr[0] << ET_WOL_HI_SA1_SHIFT) | - etdev->addr[1]; + sa_hi = (u32) (adapter->addr[0] << ET_WOL_HI_SA1_SHIFT) | + adapter->addr[1]; writel(sa_hi, &rxmac->sa_hi); /* Disable all Packet Filtering */ writel(0, &rxmac->pf_ctrl); /* Let's initialize the Unicast Packet filtering address */ - if (etdev->packet_filter & ET131X_PACKET_TYPE_DIRECTED) { - et1310_setup_device_for_unicast(etdev); + if (adapter->packet_filter & ET131X_PACKET_TYPE_DIRECTED) { + et1310_setup_device_for_unicast(adapter); pf_ctrl |= 4; /* Unicast filter */ } else { writel(0, &rxmac->uni_pf_addr1); @@ -304,16 +304,16 @@ void et1310_config_rxmac_regs(struct et131x_adapter *etdev) } /* Let's initialize the Multicast hash */ - if (!(etdev->packet_filter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { + if (!(adapter->packet_filter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { pf_ctrl |= 2; /* Multicast filter */ - et1310_setup_device_for_multicast(etdev); + et1310_setup_device_for_multicast(adapter); } /* Runt packet filtering. Didn't work in version A silicon. */ pf_ctrl |= (NIC_MIN_PACKET_SIZE + 4) << 16; pf_ctrl |= 8; /* Fragment filter */ - if (etdev->registry_jumbo_packet > 8192) + if (adapter->registry_jumbo_packet > 8192) /* In order to transmit jumbo packets greater than 8k, the * FIFO between RxMAC and RxDMA needs to be reduced in size * to (16k - Jumbo packet size). In order to implement this, @@ -350,7 +350,7 @@ void et1310_config_rxmac_regs(struct et131x_adapter *etdev) * bit 16: Receive frame truncated. * bit 17: Drop packet enable */ - if (etdev->linkspeed == TRUEPHY_SPEED_100MBPS) + if (adapter->linkspeed == TRUEPHY_SPEED_100MBPS) writel(0x30038, &rxmac->mif_ctrl); else writel(0x30030, &rxmac->mif_ctrl); @@ -365,24 +365,24 @@ void et1310_config_rxmac_regs(struct et131x_adapter *etdev) writel(0x9, &rxmac->ctrl); } -void et1310_config_txmac_regs(struct et131x_adapter *etdev) +void et1310_config_txmac_regs(struct et131x_adapter *adapter) { - struct txmac_regs *txmac = &etdev->regs->txmac; + struct txmac_regs *txmac = &adapter->regs->txmac; /* We need to update the Control Frame Parameters * cfpt - control frame pause timer set to 64 (0x40) * cfep - control frame extended pause timer set to 0x0 */ - if (etdev->flowcontrol == FLOW_NONE) + if (adapter->flowcontrol == FLOW_NONE) writel(0, &txmac->cf_param); else writel(0x40, &txmac->cf_param); } -void et1310_config_macstat_regs(struct et131x_adapter *etdev) +void et1310_config_macstat_regs(struct et131x_adapter *adapter) { struct macstat_regs __iomem *macstat = - &etdev->regs->macstat; + &adapter->regs->macstat; /* Next we need to initialize all the macstat registers to zero on * the device. @@ -444,50 +444,50 @@ void et1310_config_macstat_regs(struct et131x_adapter *etdev) writel(0xFFFE7E8B, &macstat->carry_reg2_mask); } -void et1310_config_flow_control(struct et131x_adapter *etdev) +void et1310_config_flow_control(struct et131x_adapter *adapter) { - if (etdev->duplex_mode == 0) { - etdev->flowcontrol = FLOW_NONE; + if (adapter->duplex_mode == 0) { + adapter->flowcontrol = FLOW_NONE; } else { char remote_pause, remote_async_pause; - et1310_phy_access_mii_bit(etdev, + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_READ, 5, 10, &remote_pause); - et1310_phy_access_mii_bit(etdev, + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_READ, 5, 11, &remote_async_pause); if ((remote_pause == TRUEPHY_BIT_SET) && (remote_async_pause == TRUEPHY_BIT_SET)) { - etdev->flowcontrol = etdev->wanted_flow; + adapter->flowcontrol = adapter->wanted_flow; } else if ((remote_pause == TRUEPHY_BIT_SET) && (remote_async_pause == TRUEPHY_BIT_CLEAR)) { - if (etdev->wanted_flow == FLOW_BOTH) - etdev->flowcontrol = FLOW_BOTH; + if (adapter->wanted_flow == FLOW_BOTH) + adapter->flowcontrol = FLOW_BOTH; else - etdev->flowcontrol = FLOW_NONE; + adapter->flowcontrol = FLOW_NONE; } else if ((remote_pause == TRUEPHY_BIT_CLEAR) && (remote_async_pause == TRUEPHY_BIT_CLEAR)) { - etdev->flowcontrol = FLOW_NONE; + adapter->flowcontrol = FLOW_NONE; } else {/* if (remote_pause == TRUEPHY_CLEAR_BIT && remote_async_pause == TRUEPHY_SET_BIT) */ - if (etdev->wanted_flow == FLOW_BOTH) - etdev->flowcontrol = FLOW_RXONLY; + if (adapter->wanted_flow == FLOW_BOTH) + adapter->flowcontrol = FLOW_RXONLY; else - etdev->flowcontrol = FLOW_NONE; + adapter->flowcontrol = FLOW_NONE; } } } /** * et1310_update_macstat_host_counters - Update the local copy of the statistics - * @etdev: pointer to the adapter structure + * @adapter: pointer to the adapter structure */ -void et1310_update_macstat_host_counters(struct et131x_adapter *etdev) +void et1310_update_macstat_host_counters(struct et131x_adapter *adapter) { - struct ce_stats *stats = &etdev->stats; + struct ce_stats *stats = &adapter->stats; struct macstat_regs __iomem *macstat = - &etdev->regs->macstat; + &adapter->regs->macstat; stats->tx_collisions += readl(&macstat->tx_total_collisions); stats->tx_first_collisions += readl(&macstat->tx_single_collisions); @@ -509,13 +509,13 @@ void et1310_update_macstat_host_counters(struct et131x_adapter *etdev) /** * et1310_handle_macstat_interrupt - * @etdev: pointer to the adapter structure + * @adapter: pointer to the adapter structure * * One of the MACSTAT counters has wrapped. Update the local copy of * the statistics held in the adapter structure, checking the "wrap" * bit for each counter. */ -void et1310_handle_macstat_interrupt(struct et131x_adapter *etdev) +void et1310_handle_macstat_interrupt(struct et131x_adapter *adapter) { u32 carry_reg1; u32 carry_reg2; @@ -523,11 +523,11 @@ void et1310_handle_macstat_interrupt(struct et131x_adapter *etdev) /* Read the interrupt bits from the register(s). These are Clear On * Write. */ - carry_reg1 = readl(&etdev->regs->macstat.carry_reg1); - carry_reg2 = readl(&etdev->regs->macstat.carry_reg2); + carry_reg1 = readl(&adapter->regs->macstat.carry_reg1); + carry_reg2 = readl(&adapter->regs->macstat.carry_reg2); - writel(carry_reg1, &etdev->regs->macstat.carry_reg1); - writel(carry_reg2, &etdev->regs->macstat.carry_reg2); + writel(carry_reg1, &adapter->regs->macstat.carry_reg1); + writel(carry_reg2, &adapter->regs->macstat.carry_reg2); /* We need to do update the host copy of all the MAC_STAT counters. * For each counter, check it's overflow bit. If the overflow bit is @@ -536,38 +536,38 @@ void et1310_handle_macstat_interrupt(struct et131x_adapter *etdev) * block indicates that one of the counters has wrapped. */ if (carry_reg1 & (1 << 14)) - etdev->stats.rx_code_violations += COUNTER_WRAP_16_BIT; + adapter->stats.rx_code_violations += COUNTER_WRAP_16_BIT; if (carry_reg1 & (1 << 8)) - etdev->stats.rx_align_errs += COUNTER_WRAP_12_BIT; + adapter->stats.rx_align_errs += COUNTER_WRAP_12_BIT; if (carry_reg1 & (1 << 7)) - etdev->stats.rx_length_errs += COUNTER_WRAP_16_BIT; + adapter->stats.rx_length_errs += COUNTER_WRAP_16_BIT; if (carry_reg1 & (1 << 2)) - etdev->stats.rx_other_errs += COUNTER_WRAP_16_BIT; + adapter->stats.rx_other_errs += COUNTER_WRAP_16_BIT; if (carry_reg1 & (1 << 6)) - etdev->stats.rx_crc_errs += COUNTER_WRAP_16_BIT; + adapter->stats.rx_crc_errs += COUNTER_WRAP_16_BIT; if (carry_reg1 & (1 << 3)) - etdev->stats.rx_overflows += COUNTER_WRAP_16_BIT; + adapter->stats.rx_overflows += COUNTER_WRAP_16_BIT; if (carry_reg1 & (1 << 0)) - etdev->stats.rcvd_pkts_dropped += COUNTER_WRAP_16_BIT; + adapter->stats.rcvd_pkts_dropped += COUNTER_WRAP_16_BIT; if (carry_reg2 & (1 << 16)) - etdev->stats.tx_max_pkt_errs += COUNTER_WRAP_12_BIT; + adapter->stats.tx_max_pkt_errs += COUNTER_WRAP_12_BIT; if (carry_reg2 & (1 << 15)) - etdev->stats.tx_underflows += COUNTER_WRAP_12_BIT; + adapter->stats.tx_underflows += COUNTER_WRAP_12_BIT; if (carry_reg2 & (1 << 6)) - etdev->stats.tx_first_collisions += COUNTER_WRAP_12_BIT; + adapter->stats.tx_first_collisions += COUNTER_WRAP_12_BIT; if (carry_reg2 & (1 << 8)) - etdev->stats.tx_deferred += COUNTER_WRAP_12_BIT; + adapter->stats.tx_deferred += COUNTER_WRAP_12_BIT; if (carry_reg2 & (1 << 5)) - etdev->stats.tx_excessive_collisions += COUNTER_WRAP_12_BIT; + adapter->stats.tx_excessive_collisions += COUNTER_WRAP_12_BIT; if (carry_reg2 & (1 << 4)) - etdev->stats.tx_late_collisions += COUNTER_WRAP_12_BIT; + adapter->stats.tx_late_collisions += COUNTER_WRAP_12_BIT; if (carry_reg2 & (1 << 2)) - etdev->stats.tx_collisions += COUNTER_WRAP_12_BIT; + adapter->stats.tx_collisions += COUNTER_WRAP_12_BIT; } -void et1310_setup_device_for_multicast(struct et131x_adapter *etdev) +void et1310_setup_device_for_multicast(struct et131x_adapter *adapter) { - struct rxmac_regs __iomem *rxmac = &etdev->regs->rxmac; + struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; uint32_t nIndex; uint32_t result; uint32_t hash1 = 0; @@ -581,11 +581,11 @@ void et1310_setup_device_for_multicast(struct et131x_adapter *etdev) * specified) then we should pass NO multi-cast addresses to the * driver. */ - if (etdev->packet_filter & ET131X_PACKET_TYPE_MULTICAST) { + if (adapter->packet_filter & ET131X_PACKET_TYPE_MULTICAST) { /* Loop through our multicast array and set up the device */ - for (nIndex = 0; nIndex < etdev->multicast_addr_count; + for (nIndex = 0; nIndex < adapter->multicast_addr_count; nIndex++) { - result = ether_crc(6, etdev->multicast_list[nIndex]); + result = ether_crc(6, adapter->multicast_list[nIndex]); result = (result & 0x3F800000) >> 23; @@ -605,7 +605,7 @@ void et1310_setup_device_for_multicast(struct et131x_adapter *etdev) } /* Write out the new hash to the device */ - pm_csr = readl(&etdev->regs->global.pm_csr); + pm_csr = readl(&adapter->regs->global.pm_csr); if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) { writel(hash1, &rxmac->multi_hash1); writel(hash2, &rxmac->multi_hash2); @@ -614,9 +614,9 @@ void et1310_setup_device_for_multicast(struct et131x_adapter *etdev) } } -void et1310_setup_device_for_unicast(struct et131x_adapter *etdev) +void et1310_setup_device_for_unicast(struct et131x_adapter *adapter) { - struct rxmac_regs __iomem *rxmac = &etdev->regs->rxmac; + struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; u32 uni_pf1; u32 uni_pf2; u32 uni_pf3; @@ -631,22 +631,22 @@ void et1310_setup_device_for_unicast(struct et131x_adapter *etdev) * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the * MAC address for first address */ - uni_pf3 = (etdev->addr[0] << ET_UNI_PF_ADDR2_1_SHIFT) | - (etdev->addr[1] << ET_UNI_PF_ADDR2_2_SHIFT) | - (etdev->addr[0] << ET_UNI_PF_ADDR1_1_SHIFT) | - etdev->addr[1]; - - uni_pf2 = (etdev->addr[2] << ET_UNI_PF_ADDR2_3_SHIFT) | - (etdev->addr[3] << ET_UNI_PF_ADDR2_4_SHIFT) | - (etdev->addr[4] << ET_UNI_PF_ADDR2_5_SHIFT) | - etdev->addr[5]; - - uni_pf1 = (etdev->addr[2] << ET_UNI_PF_ADDR1_3_SHIFT) | - (etdev->addr[3] << ET_UNI_PF_ADDR1_4_SHIFT) | - (etdev->addr[4] << ET_UNI_PF_ADDR1_5_SHIFT) | - etdev->addr[5]; - - pm_csr = readl(&etdev->regs->global.pm_csr); + uni_pf3 = (adapter->addr[0] << ET_UNI_PF_ADDR2_1_SHIFT) | + (adapter->addr[1] << ET_UNI_PF_ADDR2_2_SHIFT) | + (adapter->addr[0] << ET_UNI_PF_ADDR1_1_SHIFT) | + adapter->addr[1]; + + uni_pf2 = (adapter->addr[2] << ET_UNI_PF_ADDR2_3_SHIFT) | + (adapter->addr[3] << ET_UNI_PF_ADDR2_4_SHIFT) | + (adapter->addr[4] << ET_UNI_PF_ADDR2_5_SHIFT) | + adapter->addr[5]; + + uni_pf1 = (adapter->addr[2] << ET_UNI_PF_ADDR1_3_SHIFT) | + (adapter->addr[3] << ET_UNI_PF_ADDR1_4_SHIFT) | + (adapter->addr[4] << ET_UNI_PF_ADDR1_5_SHIFT) | + adapter->addr[5]; + + pm_csr = readl(&adapter->regs->global.pm_csr); if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) { writel(uni_pf1, &rxmac->uni_pf_addr1); writel(uni_pf2, &rxmac->uni_pf_addr2); diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c index 9d2ce08d9ae7..6eb9d5cb6432 100644 --- a/drivers/staging/et131x/et1310_phy.c +++ b/drivers/staging/et131x/et1310_phy.c @@ -95,17 +95,17 @@ /** * et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC - * @etdev: pointer to our private adapter structure + * @adapter: pointer to our private adapter structure * @xcvr_addr: the address of the transceiver * @xcvr_reg: the register to read * @value: pointer to a 16-bit value in which the value will be stored * * Returns 0 on success, errno on failure (as defined in errno.h) */ -int et131x_phy_mii_read(struct et131x_adapter *etdev, u8 xcvr_addr, +int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 xcvr_addr, u8 xcvr_reg, u16 *value) { - struct mac_regs __iomem *mac = &etdev->regs->mac; + struct mac_regs __iomem *mac = &adapter->regs->mac; int status = 0; u32 delay; u32 mii_addr; @@ -137,9 +137,9 @@ int et131x_phy_mii_read(struct et131x_adapter *etdev, u8 xcvr_addr, /* If we hit the max delay, we could not read the register */ if (delay == 50) { - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "xcvrReg 0x%08x could not be read\n", xcvr_reg); - dev_warn(&etdev->pdev->dev, "status is 0x%08x\n", + dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", mii_indicator); status = -EIO; @@ -163,7 +163,7 @@ int et131x_phy_mii_read(struct et131x_adapter *etdev, u8 xcvr_addr, /** * et131x_mii_write - Write to a PHY register through the MII interface of the MAC - * @etdev: pointer to our private adapter structure + * @adapter: pointer to our private adapter structure * @xcvr_reg: the register to read * @value: 16-bit value to write * @@ -171,11 +171,11 @@ int et131x_phy_mii_read(struct et131x_adapter *etdev, u8 xcvr_addr, * * Return 0 on success, errno on failure (as defined in errno.h) */ -int et131x_mii_write(struct et131x_adapter *etdev, u8 xcvr_reg, u16 value) +int et131x_mii_write(struct et131x_adapter *adapter, u8 xcvr_reg, u16 value) { - struct mac_regs __iomem *mac = &etdev->regs->mac; + struct mac_regs __iomem *mac = &adapter->regs->mac; int status = 0; - u8 xcvr_addr = etdev->stats.xcvr_addr; + u8 xcvr_addr = adapter->stats.xcvr_addr; u32 delay; u32 mii_addr; u32 mii_cmd; @@ -207,14 +207,14 @@ int et131x_mii_write(struct et131x_adapter *etdev, u8 xcvr_reg, u16 value) if (delay == 100) { u16 tmp; - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "xcvrReg 0x%08x could not be written", xcvr_reg); - dev_warn(&etdev->pdev->dev, "status is 0x%08x\n", + dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", mii_indicator); - dev_warn(&etdev->pdev->dev, "command is 0x%08x\n", + dev_warn(&adapter->pdev->dev, "command is 0x%08x\n", readl(&mac->mii_mgmt_cmd)); - et131x_mii_read(etdev, xcvr_reg, &tmp); + et131x_mii_read(adapter, xcvr_reg, &tmp); status = -EIO; } @@ -233,11 +233,11 @@ int et131x_mii_write(struct et131x_adapter *etdev, u8 xcvr_reg, u16 value) /** * et131x_xcvr_find - Find the PHY ID - * @etdev: pointer to our private adapter structure + * @adapter: pointer to our private adapter structure * * Returns 0 on success, errno on failure (as defined in errno.h) */ -int et131x_xcvr_find(struct et131x_adapter *etdev) +int et131x_xcvr_find(struct et131x_adapter *adapter) { u8 xcvr_addr; u16 idr1; @@ -247,32 +247,32 @@ int et131x_xcvr_find(struct et131x_adapter *etdev) /* We need to get xcvr id and address we just get the first one */ for (xcvr_addr = 0; xcvr_addr < 32; xcvr_addr++) { /* Read the ID from the PHY */ - et131x_phy_mii_read(etdev, xcvr_addr, + et131x_phy_mii_read(adapter, xcvr_addr, (u8) offsetof(struct mi_regs, idr1), &idr1); - et131x_phy_mii_read(etdev, xcvr_addr, + et131x_phy_mii_read(adapter, xcvr_addr, (u8) offsetof(struct mi_regs, idr2), &idr2); xcvr_id = (u32) ((idr1 << 16) | idr2); if (idr1 != 0 && idr1 != 0xffff) { - etdev->stats.xcvr_id = xcvr_id; - etdev->stats.xcvr_addr = xcvr_addr; + adapter->stats.xcvr_id = xcvr_id; + adapter->stats.xcvr_addr = xcvr_addr; return 0; } } return -ENODEV; } -void et1310_phy_reset(struct et131x_adapter *etdev) +void et1310_phy_reset(struct et131x_adapter *adapter) { - et131x_mii_write(etdev, PHY_CONTROL, 0x8000); + et131x_mii_write(adapter, PHY_CONTROL, 0x8000); } /** * et1310_phy_power_down - PHY power control - * @etdev: device to control + * @adapter: device to control * @down: true for off/false for back on * * one hundred, ten, one thousand megs @@ -280,77 +280,77 @@ void et1310_phy_reset(struct et131x_adapter *etdev) * Can't you see that this code processed * Phy power, phy power.. */ -void et1310_phy_power_down(struct et131x_adapter *etdev, bool down) +void et1310_phy_power_down(struct et131x_adapter *adapter, bool down) { u16 data; - et131x_mii_read(etdev, PHY_CONTROL, &data); + et131x_mii_read(adapter, PHY_CONTROL, &data); data &= ~0x0800; /* Power UP */ if (down) /* Power DOWN */ data |= 0x0800; - et131x_mii_write(etdev, PHY_CONTROL, data); + et131x_mii_write(adapter, PHY_CONTROL, data); } /** * et1310_phy_auto_neg - autonegotiate control - * @etdev: device to control + * @adapter: device to control * @enabe: autoneg on/off * * Set up the autonegotiation state according to whether we will be * negotiating the state or forcing a speed. */ -static void et1310_phy_auto_neg(struct et131x_adapter *etdev, bool enable) +static void et1310_phy_auto_neg(struct et131x_adapter *adapter, bool enable) { u16 data; - et131x_mii_read(etdev, PHY_CONTROL, &data); + et131x_mii_read(adapter, PHY_CONTROL, &data); data &= ~0x1000; /* Autonegotiation OFF */ if (enable) data |= 0x1000; /* Autonegotiation ON */ - et131x_mii_write(etdev, PHY_CONTROL, data); + et131x_mii_write(adapter, PHY_CONTROL, data); } /** * et1310_phy_duplex_mode - duplex control - * @etdev: device to control + * @adapter: device to control * @duplex: duplex on/off * * Set up the duplex state on the PHY */ -static void et1310_phy_duplex_mode(struct et131x_adapter *etdev, u16 duplex) +static void et1310_phy_duplex_mode(struct et131x_adapter *adapter, u16 duplex) { u16 data; - et131x_mii_read(etdev, PHY_CONTROL, &data); + et131x_mii_read(adapter, PHY_CONTROL, &data); data &= ~0x100; /* Set Half Duplex */ if (duplex == TRUEPHY_DUPLEX_FULL) data |= 0x100; /* Set Full Duplex */ - et131x_mii_write(etdev, PHY_CONTROL, data); + et131x_mii_write(adapter, PHY_CONTROL, data); } /** * et1310_phy_speed_select - speed control - * @etdev: device to control + * @adapter: device to control * @duplex: duplex on/off * * Set the speed of our PHY. */ -static void et1310_phy_speed_select(struct et131x_adapter *etdev, u16 speed) +static void et1310_phy_speed_select(struct et131x_adapter *adapter, u16 speed) { u16 data; static const u16 bits[3] = {0x0000, 0x2000, 0x0040}; /* Read the PHY control register */ - et131x_mii_read(etdev, PHY_CONTROL, &data); + et131x_mii_read(adapter, PHY_CONTROL, &data); /* Clear all Speed settings (Bits 6, 13) */ data &= ~0x2040; /* Write back the new speed */ - et131x_mii_write(etdev, PHY_CONTROL, data | bits[speed]); + et131x_mii_write(adapter, PHY_CONTROL, data | bits[speed]); } /** * et1310_phy_link_status - read link state - * @etdev: device to read + * @adapter: device to read * @link_status: reported link state * @autoneg: reported autonegotiation state (complete/incomplete/disabled) * @linkspeed: returnedlink speed in use @@ -364,7 +364,7 @@ static void et1310_phy_speed_select(struct et131x_adapter *etdev, u16 speed) * I know your link speed * I see all the setting that you'd rather keep */ -static void et1310_phy_link_status(struct et131x_adapter *etdev, +static void et1310_phy_link_status(struct et131x_adapter *adapter, u8 *link_status, u32 *autoneg, u32 *linkspeed, @@ -377,10 +377,10 @@ static void et1310_phy_link_status(struct et131x_adapter *etdev, u16 vmi_phystatus = 0; u16 control = 0; - et131x_mii_read(etdev, PHY_STATUS, &mistatus); - et131x_mii_read(etdev, PHY_1000_STATUS, &is1000BaseT); - et131x_mii_read(etdev, PHY_PHY_STATUS, &vmi_phystatus); - et131x_mii_read(etdev, PHY_CONTROL, &control); + et131x_mii_read(adapter, PHY_STATUS, &mistatus); + et131x_mii_read(adapter, PHY_1000_STATUS, &is1000BaseT); + et131x_mii_read(adapter, PHY_PHY_STATUS, &vmi_phystatus); + et131x_mii_read(adapter, PHY_CONTROL, &control); *link_status = (vmi_phystatus & 0x0040) ? 1 : 0; *autoneg = (control & 0x1000) ? ((vmi_phystatus & 0x0020) ? @@ -398,26 +398,26 @@ static void et1310_phy_link_status(struct et131x_adapter *etdev, TRUEPHY_POLARITY_INVERTED : TRUEPHY_POLARITY_NORMAL; } -static void et1310_phy_and_or_reg(struct et131x_adapter *etdev, +static void et1310_phy_and_or_reg(struct et131x_adapter *adapter, u16 regnum, u16 and_mask, u16 or_mask) { u16 reg; - et131x_mii_read(etdev, regnum, ®); + et131x_mii_read(adapter, regnum, ®); reg &= and_mask; reg |= or_mask; - et131x_mii_write(etdev, regnum, reg); + et131x_mii_write(adapter, regnum, reg); } /* Still used from _mac for BIT_READ */ -void et1310_phy_access_mii_bit(struct et131x_adapter *etdev, u16 action, +void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, u16 action, u16 regnum, u16 bitnum, u8 *value) { u16 reg; u16 mask = 0x0001 << bitnum; /* Read the requested register */ - et131x_mii_read(etdev, regnum, ®); + et131x_mii_read(adapter, regnum, ®); switch (action) { case TRUEPHY_BIT_READ: @@ -425,11 +425,11 @@ void et1310_phy_access_mii_bit(struct et131x_adapter *etdev, u16 action, break; case TRUEPHY_BIT_SET: - et131x_mii_write(etdev, regnum, reg | mask); + et131x_mii_write(adapter, regnum, reg | mask); break; case TRUEPHY_BIT_CLEAR: - et131x_mii_write(etdev, regnum, reg & ~mask); + et131x_mii_write(adapter, regnum, reg & ~mask); break; default: @@ -437,13 +437,13 @@ void et1310_phy_access_mii_bit(struct et131x_adapter *etdev, u16 action, } } -void et1310_phy_advertise_1000BaseT(struct et131x_adapter *etdev, +void et1310_phy_advertise_1000BaseT(struct et131x_adapter *adapter, u16 duplex) { u16 data; /* Read the PHY 1000 Base-T Control Register */ - et131x_mii_read(etdev, PHY_1000_CONTROL, &data); + et131x_mii_read(adapter, PHY_1000_CONTROL, &data); /* Clear Bits 8,9 */ data &= ~0x0300; @@ -470,16 +470,16 @@ void et1310_phy_advertise_1000BaseT(struct et131x_adapter *etdev, } /* Write back advertisement */ - et131x_mii_write(etdev, PHY_1000_CONTROL, data); + et131x_mii_write(adapter, PHY_1000_CONTROL, data); } -static void et1310_phy_advertise_100BaseT(struct et131x_adapter *etdev, +static void et1310_phy_advertise_100BaseT(struct et131x_adapter *adapter, u16 duplex) { u16 data; /* Read the Autonegotiation Register (10/100) */ - et131x_mii_read(etdev, PHY_AUTO_ADVERTISEMENT, &data); + et131x_mii_read(adapter, PHY_AUTO_ADVERTISEMENT, &data); /* Clear bits 7,8 */ data &= ~0x0180; @@ -507,16 +507,16 @@ static void et1310_phy_advertise_100BaseT(struct et131x_adapter *etdev, } /* Write back advertisement */ - et131x_mii_write(etdev, PHY_AUTO_ADVERTISEMENT, data); + et131x_mii_write(adapter, PHY_AUTO_ADVERTISEMENT, data); } -static void et1310_phy_advertise_10BaseT(struct et131x_adapter *etdev, +static void et1310_phy_advertise_10BaseT(struct et131x_adapter *adapter, u16 duplex) { u16 data; /* Read the Autonegotiation Register (10/100) */ - et131x_mii_read(etdev, PHY_AUTO_ADVERTISEMENT, &data); + et131x_mii_read(adapter, PHY_AUTO_ADVERTISEMENT, &data); /* Clear bits 5,6 */ data &= ~0x0060; @@ -544,32 +544,32 @@ static void et1310_phy_advertise_10BaseT(struct et131x_adapter *etdev, } /* Write back advertisement */ - et131x_mii_write(etdev, PHY_AUTO_ADVERTISEMENT, data); + et131x_mii_write(adapter, PHY_AUTO_ADVERTISEMENT, data); } /** * et131x_xcvr_init - Init the phy if we are setting it into force mode - * @etdev: pointer to our private adapter structure + * @adapter: pointer to our private adapter structure * */ -static void et131x_xcvr_init(struct et131x_adapter *etdev) +static void et131x_xcvr_init(struct et131x_adapter *adapter) { u16 imr; u16 isr; u16 lcr2; /* Zero out the adapter structure variable representing BMSR */ - etdev->bmsr = 0; + adapter->bmsr = 0; - et131x_mii_read(etdev, (u8) offsetof(struct mi_regs, isr), &isr); - et131x_mii_read(etdev, (u8) offsetof(struct mi_regs, imr), &imr); + et131x_mii_read(adapter, (u8) offsetof(struct mi_regs, isr), &isr); + et131x_mii_read(adapter, (u8) offsetof(struct mi_regs, imr), &imr); /* Set the link status interrupt only. Bad behavior when link status * and auto neg are set, we run into a nested interrupt problem */ imr |= 0x0105; - et131x_mii_write(etdev, (u8) offsetof(struct mi_regs, imr), imr); + et131x_mii_write(adapter, (u8) offsetof(struct mi_regs, imr), imr); /* Set the LED behavior such that LED 1 indicates speed (off = * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates @@ -579,150 +579,150 @@ static void et131x_xcvr_init(struct et131x_adapter *etdev) * vendors; The LED behavior is now determined by vendor data in the * EEPROM. However, the above description is the default. */ - if ((etdev->eeprom_data[1] & 0x4) == 0) { - et131x_mii_read(etdev, (u8) offsetof(struct mi_regs, lcr2), + if ((adapter->eeprom_data[1] & 0x4) == 0) { + et131x_mii_read(adapter, (u8) offsetof(struct mi_regs, lcr2), &lcr2); lcr2 &= 0x00FF; lcr2 |= 0xA000; /* led link */ - if ((etdev->eeprom_data[1] & 0x8) == 0) + if ((adapter->eeprom_data[1] & 0x8) == 0) lcr2 |= 0x0300; else lcr2 |= 0x0400; - et131x_mii_write(etdev, (u8) offsetof(struct mi_regs, lcr2), + et131x_mii_write(adapter, (u8) offsetof(struct mi_regs, lcr2), lcr2); } /* Determine if we need to go into a force mode and set it */ - if (etdev->ai_force_speed == 0 && etdev->ai_force_duplex == 0) { - if (etdev->wanted_flow == FLOW_TXONLY || - etdev->wanted_flow == FLOW_BOTH) - et1310_phy_access_mii_bit(etdev, + if (adapter->ai_force_speed == 0 && adapter->ai_force_duplex == 0) { + if (adapter->wanted_flow == FLOW_TXONLY || + adapter->wanted_flow == FLOW_BOTH) + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_SET, 4, 11, NULL); else - et1310_phy_access_mii_bit(etdev, + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_CLEAR, 4, 11, NULL); - if (etdev->wanted_flow == FLOW_BOTH) - et1310_phy_access_mii_bit(etdev, + if (adapter->wanted_flow == FLOW_BOTH) + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_SET, 4, 10, NULL); else - et1310_phy_access_mii_bit(etdev, + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_CLEAR, 4, 10, NULL); /* Set the phy to autonegotiation */ - et1310_phy_auto_neg(etdev, true); + et1310_phy_auto_neg(adapter, true); /* NOTE - Do we need this? */ - et1310_phy_access_mii_bit(etdev, TRUEPHY_BIT_SET, 0, 9, NULL); + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_SET, 0, 9, NULL); return; } - et1310_phy_auto_neg(etdev, false); + et1310_phy_auto_neg(adapter, false); /* Set to the correct force mode. */ - if (etdev->ai_force_duplex != 1) { - if (etdev->wanted_flow == FLOW_TXONLY || - etdev->wanted_flow == FLOW_BOTH) - et1310_phy_access_mii_bit(etdev, + if (adapter->ai_force_duplex != 1) { + if (adapter->wanted_flow == FLOW_TXONLY || + adapter->wanted_flow == FLOW_BOTH) + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_SET, 4, 11, NULL); else - et1310_phy_access_mii_bit(etdev, + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_CLEAR, 4, 11, NULL); - if (etdev->wanted_flow == FLOW_BOTH) - et1310_phy_access_mii_bit(etdev, + if (adapter->wanted_flow == FLOW_BOTH) + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_SET, 4, 10, NULL); else - et1310_phy_access_mii_bit(etdev, + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_CLEAR, 4, 10, NULL); } else { - et1310_phy_access_mii_bit(etdev, TRUEPHY_BIT_CLEAR, + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_CLEAR, 4, 10, NULL); - et1310_phy_access_mii_bit(etdev, TRUEPHY_BIT_CLEAR, + et1310_phy_access_mii_bit(adapter, TRUEPHY_BIT_CLEAR, 4, 11, NULL); } - et1310_phy_power_down(etdev, 1); - switch (etdev->ai_force_speed) { + et1310_phy_power_down(adapter, 1); + switch (adapter->ai_force_speed) { case 10: /* First we need to turn off all other advertisement */ - et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - et1310_phy_advertise_100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - if (etdev->ai_force_duplex == 1) { + et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE); + et1310_phy_advertise_100BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE); + if (adapter->ai_force_duplex == 1) { /* Set our advertise values accordingly */ - et1310_phy_advertise_10BaseT(etdev, + et1310_phy_advertise_10BaseT(adapter, TRUEPHY_ADV_DUPLEX_HALF); - } else if (etdev->ai_force_duplex == 2) { + } else if (adapter->ai_force_duplex == 2) { /* Set our advertise values accordingly */ - et1310_phy_advertise_10BaseT(etdev, + et1310_phy_advertise_10BaseT(adapter, TRUEPHY_ADV_DUPLEX_FULL); } else { /* Disable autoneg */ - et1310_phy_auto_neg(etdev, false); + et1310_phy_auto_neg(adapter, false); /* Disable rest of the advertisements */ - et1310_phy_advertise_10BaseT(etdev, + et1310_phy_advertise_10BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE); /* Force 10 Mbps */ - et1310_phy_speed_select(etdev, TRUEPHY_SPEED_10MBPS); + et1310_phy_speed_select(adapter, TRUEPHY_SPEED_10MBPS); /* Force Full duplex */ - et1310_phy_duplex_mode(etdev, TRUEPHY_DUPLEX_FULL); + et1310_phy_duplex_mode(adapter, TRUEPHY_DUPLEX_FULL); } break; case 100: /* first we need to turn off all other advertisement */ - et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - et1310_phy_advertise_10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - if (etdev->ai_force_duplex == 1) { + et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE); + et1310_phy_advertise_10BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE); + if (adapter->ai_force_duplex == 1) { /* Set our advertise values accordingly */ - et1310_phy_advertise_100BaseT(etdev, + et1310_phy_advertise_100BaseT(adapter, TRUEPHY_ADV_DUPLEX_HALF); /* Set speed */ - et1310_phy_speed_select(etdev, TRUEPHY_SPEED_100MBPS); - } else if (etdev->ai_force_duplex == 2) { + et1310_phy_speed_select(adapter, TRUEPHY_SPEED_100MBPS); + } else if (adapter->ai_force_duplex == 2) { /* Set our advertise values accordingly */ - et1310_phy_advertise_100BaseT(etdev, + et1310_phy_advertise_100BaseT(adapter, TRUEPHY_ADV_DUPLEX_FULL); } else { /* Disable autoneg */ - et1310_phy_auto_neg(etdev, false); + et1310_phy_auto_neg(adapter, false); /* Disable other advertisement */ - et1310_phy_advertise_100BaseT(etdev, + et1310_phy_advertise_100BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE); /* Force 100 Mbps */ - et1310_phy_speed_select(etdev, TRUEPHY_SPEED_100MBPS); + et1310_phy_speed_select(adapter, TRUEPHY_SPEED_100MBPS); /* Force Full duplex */ - et1310_phy_duplex_mode(etdev, TRUEPHY_DUPLEX_FULL); + et1310_phy_duplex_mode(adapter, TRUEPHY_DUPLEX_FULL); } break; case 1000: /* first we need to turn off all other advertisement */ - et1310_phy_advertise_100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - et1310_phy_advertise_10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + et1310_phy_advertise_100BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE); + et1310_phy_advertise_10BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE); /* set our advertise values accordingly */ - et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); + et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_FULL); break; } - et1310_phy_power_down(etdev, 0); + et1310_phy_power_down(adapter, 0); } /** * et131x_setphy_normal - Set PHY for normal operation. - * @etdev: pointer to our private adapter structure + * @adapter: pointer to our private adapter structure * * Used by Power Management to force the PHY into 10 Base T half-duplex mode, * when going to D3 in WOL mode. Also used during initialization to set the * PHY for normal operation. */ -void et131x_setphy_normal(struct et131x_adapter *etdev) +void et131x_setphy_normal(struct et131x_adapter *adapter) { /* Make sure the PHY is powered up */ - et1310_phy_power_down(etdev, 0); - et131x_xcvr_init(etdev); + et1310_phy_power_down(adapter, 0); + et131x_xcvr_init(adapter); } -void et131x_mii_check(struct et131x_adapter *etdev, +void et131x_mii_check(struct et131x_adapter *adapter, u16 bmsr, u16 bmsr_ints) { u8 link_status; @@ -736,36 +736,36 @@ void et131x_mii_check(struct et131x_adapter *etdev, if (bmsr_ints & MI_BMSR_LINK_STATUS) { if (bmsr & MI_BMSR_LINK_STATUS) { - etdev->boot_coma = 20; + adapter->boot_coma = 20; /* Update our state variables and indicate the * connected state */ - spin_lock_irqsave(&etdev->lock, flags); + spin_lock_irqsave(&adapter->lock, flags); - etdev->media_state = NETIF_STATUS_MEDIA_CONNECT; + adapter->media_state = NETIF_STATUS_MEDIA_CONNECT; - spin_unlock_irqrestore(&etdev->lock, flags); + spin_unlock_irqrestore(&adapter->lock, flags); - netif_carrier_on(etdev->netdev); + netif_carrier_on(adapter->netdev); } else { - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "Link down - cable problem ?\n"); - if (etdev->linkspeed == TRUEPHY_SPEED_10MBPS) { + if (adapter->linkspeed == TRUEPHY_SPEED_10MBPS) { /* NOTE - Is there a way to query this without * TruePHY? - * && TRU_QueryCoreType(etdev->hTruePhy, 0) == + * && TRU_QueryCoreType(adapter->hTruePhy, 0) == * EMI_TRUEPHY_A13O) { */ u16 register18; - et131x_mii_read(etdev, 0x12, ®ister18); - et131x_mii_write(etdev, 0x12, register18 | 0x4); - et131x_mii_write(etdev, 0x10, + et131x_mii_read(adapter, 0x12, ®ister18); + et131x_mii_write(adapter, 0x12, register18 | 0x4); + et131x_mii_write(adapter, 0x10, register18 | 0x8402); - et131x_mii_write(etdev, 0x11, register18 | 511); - et131x_mii_write(etdev, 0x12, register18); + et131x_mii_write(adapter, 0x11, register18 | 511); + et131x_mii_write(adapter, 0x12, register18); } /* For the first N seconds of life, we are in "link @@ -774,27 +774,27 @@ void et131x_mii_check(struct et131x_adapter *etdev, * Timer expires, we can report disconnected (handled * in the LinkDetectionDPC). */ - if (etdev->media_state == NETIF_STATUS_MEDIA_DISCONNECT) { - spin_lock_irqsave(&etdev->lock, flags); - etdev->media_state = + if (adapter->media_state == NETIF_STATUS_MEDIA_DISCONNECT) { + spin_lock_irqsave(&adapter->lock, flags); + adapter->media_state = NETIF_STATUS_MEDIA_DISCONNECT; - spin_unlock_irqrestore(&etdev->lock, + spin_unlock_irqrestore(&adapter->lock, flags); - netif_carrier_off(etdev->netdev); + netif_carrier_off(adapter->netdev); } - etdev->linkspeed = 0; - etdev->duplex_mode = 0; + adapter->linkspeed = 0; + adapter->duplex_mode = 0; /* Free the packets being actively sent & stopped */ - et131x_free_busy_send_packets(etdev); + et131x_free_busy_send_packets(adapter); /* Re-initialize the send structures */ - et131x_init_send(etdev); + et131x_init_send(adapter); /* Reset the RFD list and re-start RU */ - et131x_reset_recv(etdev); + et131x_reset_recv(adapter); /* * Bring the device back to the state it was during @@ -802,59 +802,59 @@ void et131x_mii_check(struct et131x_adapter *etdev, * way, when we get the auto-neg complete interrupt, * we can complete init by calling config_mac_regs2. */ - et131x_soft_reset(etdev); + et131x_soft_reset(adapter); /* Setup ET1310 as per the documentation */ - et131x_adapter_setup(etdev); + et131x_adapter_setup(adapter); /* Setup the PHY into coma mode until the cable is * plugged back in */ - if (etdev->registry_phy_coma == 1) - et1310_enable_phy_coma(etdev); + if (adapter->registry_phy_coma == 1) + et1310_enable_phy_coma(adapter); } } if ((bmsr_ints & MI_BMSR_AUTO_NEG_COMPLETE) || - (etdev->ai_force_duplex == 3 && (bmsr_ints & MI_BMSR_LINK_STATUS))) { + (adapter->ai_force_duplex == 3 && (bmsr_ints & MI_BMSR_LINK_STATUS))) { if ((bmsr & MI_BMSR_AUTO_NEG_COMPLETE) || - etdev->ai_force_duplex == 3) { - et1310_phy_link_status(etdev, + adapter->ai_force_duplex == 3) { + et1310_phy_link_status(adapter, &link_status, &autoneg_status, &speed, &duplex, &mdi_mdix, &masterslave, &polarity); - etdev->linkspeed = speed; - etdev->duplex_mode = duplex; + adapter->linkspeed = speed; + adapter->duplex_mode = duplex; - etdev->boot_coma = 20; + adapter->boot_coma = 20; - if (etdev->linkspeed == TRUEPHY_SPEED_10MBPS) { + if (adapter->linkspeed == TRUEPHY_SPEED_10MBPS) { /* * NOTE - Is there a way to query this without * TruePHY? - * && TRU_QueryCoreType(etdev->hTruePhy, 0)== + * && TRU_QueryCoreType(adapter->hTruePhy, 0)== * EMI_TRUEPHY_A13O) { */ u16 register18; - et131x_mii_read(etdev, 0x12, ®ister18); - et131x_mii_write(etdev, 0x12, register18 | 0x4); - et131x_mii_write(etdev, 0x10, + et131x_mii_read(adapter, 0x12, ®ister18); + et131x_mii_write(adapter, 0x12, register18 | 0x4); + et131x_mii_write(adapter, 0x10, register18 | 0x8402); - et131x_mii_write(etdev, 0x11, register18 | 511); - et131x_mii_write(etdev, 0x12, register18); + et131x_mii_write(adapter, 0x11, register18 | 511); + et131x_mii_write(adapter, 0x12, register18); } - et1310_config_flow_control(etdev); + et1310_config_flow_control(adapter); - if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS && - etdev->registry_jumbo_packet > 2048) - et1310_phy_and_or_reg(etdev, 0x16, 0xcfff, + if (adapter->linkspeed == TRUEPHY_SPEED_1000MBPS && + adapter->registry_jumbo_packet > 2048) + et1310_phy_and_or_reg(adapter, 0x16, 0xcfff, 0x2000); - et131x_set_rx_dma_timer(etdev); - et1310_config_mac_regs2(etdev); + et131x_set_rx_dma_timer(adapter); + et1310_config_mac_regs2(adapter); } } } @@ -904,71 +904,71 @@ static const u16 config_phy[25][2] = { }; /* condensed version of the phy initialization routine */ -void et1310_phy_init(struct et131x_adapter *etdev) +void et1310_phy_init(struct et131x_adapter *adapter) { u16 data, index; /* get the identity (again ?) */ - et131x_mii_read(etdev, PHY_ID_1, &data); - et131x_mii_read(etdev, PHY_ID_2, &data); + et131x_mii_read(adapter, PHY_ID_1, &data); + et131x_mii_read(adapter, PHY_ID_2, &data); /* what does this do/achieve ? */ /* should read 0002 */ - et131x_mii_read(etdev, PHY_MPHY_CONTROL_REG, &data); - et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0006); + et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &data); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0006); /* read modem register 0402, should I do something with the return data ? */ - et131x_mii_write(etdev, PHY_INDEX_REG, 0x0402); - et131x_mii_read(etdev, PHY_DATA_REG, &data); + et131x_mii_write(adapter, PHY_INDEX_REG, 0x0402); + et131x_mii_read(adapter, PHY_DATA_REG, &data); /* what does this do/achieve ? */ - et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0002); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0002); /* get the identity (again ?) */ - et131x_mii_read(etdev, PHY_ID_1, &data); - et131x_mii_read(etdev, PHY_ID_2, &data); + et131x_mii_read(adapter, PHY_ID_1, &data); + et131x_mii_read(adapter, PHY_ID_2, &data); /* what does this achieve ? */ /* should read 0002 */ - et131x_mii_read(etdev, PHY_MPHY_CONTROL_REG, &data); - et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0006); + et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &data); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0006); /* read modem register 0402, should I do something with the return data? */ - et131x_mii_write(etdev, PHY_INDEX_REG, 0x0402); - et131x_mii_read(etdev, PHY_DATA_REG, &data); + et131x_mii_write(adapter, PHY_INDEX_REG, 0x0402); + et131x_mii_read(adapter, PHY_DATA_REG, &data); - et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0002); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0002); /* what does this achieve (should return 0x1040) */ - et131x_mii_read(etdev, PHY_CONTROL, &data); + et131x_mii_read(adapter, PHY_CONTROL, &data); /* should read 0002 */ - et131x_mii_read(etdev, PHY_MPHY_CONTROL_REG, &data); - et131x_mii_write(etdev, PHY_CONTROL, 0x1840); + et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &data); + et131x_mii_write(adapter, PHY_CONTROL, 0x1840); - et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0007); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0007); /* here the writing of the array starts.... */ index = 0; while (config_phy[index][0] != 0x0000) { /* write value */ - et131x_mii_write(etdev, PHY_INDEX_REG, config_phy[index][0]); - et131x_mii_write(etdev, PHY_DATA_REG, config_phy[index][1]); + et131x_mii_write(adapter, PHY_INDEX_REG, config_phy[index][0]); + et131x_mii_write(adapter, PHY_DATA_REG, config_phy[index][1]); /* read it back */ - et131x_mii_write(etdev, PHY_INDEX_REG, config_phy[index][0]); - et131x_mii_read(etdev, PHY_DATA_REG, &data); + et131x_mii_write(adapter, PHY_INDEX_REG, config_phy[index][0]); + et131x_mii_read(adapter, PHY_DATA_REG, &data); /* do a check on the value read back ? */ index++; } /* here the writing of the array ends... */ - et131x_mii_read(etdev, PHY_CONTROL, &data); /* 0x1840 */ + et131x_mii_read(adapter, PHY_CONTROL, &data); /* 0x1840 */ /* should read 0007 */ - et131x_mii_read(etdev, PHY_MPHY_CONTROL_REG, &data); - et131x_mii_write(etdev, PHY_CONTROL, 0x1040); - et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0002); + et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &data); + et131x_mii_write(adapter, PHY_CONTROL, 0x1040); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, 0x0002); } diff --git a/drivers/staging/et131x/et1310_pm.c b/drivers/staging/et131x/et1310_pm.c index 914aff65d69e..5ebf0645c1ce 100644 --- a/drivers/staging/et131x/et1310_pm.c +++ b/drivers/staging/et131x/et1310_pm.c @@ -88,7 +88,7 @@ /** * et1310_enable_phy_coma - called when network cable is unplugged - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure * * driver receive an phy status change interrupt while in D0 and check that * phy_status is down. @@ -106,75 +106,75 @@ * indicating linkup status, call the MPDisablePhyComa routine to * restore JAGCore and gigE PHY */ -void et1310_enable_phy_coma(struct et131x_adapter *etdev) +void et1310_enable_phy_coma(struct et131x_adapter *adapter) { unsigned long flags; u32 pmcsr; - pmcsr = readl(&etdev->regs->global.pm_csr); + pmcsr = readl(&adapter->regs->global.pm_csr); /* Save the GbE PHY speed and duplex modes. Need to restore this * when cable is plugged back in */ - etdev->pdown_speed = etdev->ai_force_speed; - etdev->pdown_duplex = etdev->ai_force_duplex; + adapter->pdown_speed = adapter->ai_force_speed; + adapter->pdown_duplex = adapter->ai_force_duplex; /* Stop sending packets. */ - spin_lock_irqsave(&etdev->send_hw_lock, flags); - etdev->flags |= fMP_ADAPTER_LOWER_POWER; - spin_unlock_irqrestore(&etdev->send_hw_lock, flags); + spin_lock_irqsave(&adapter->send_hw_lock, flags); + adapter->flags |= fMP_ADAPTER_LOWER_POWER; + spin_unlock_irqrestore(&adapter->send_hw_lock, flags); /* Wait for outstanding Receive packets */ /* Gate off JAGCore 3 clock domains */ pmcsr &= ~ET_PMCSR_INIT; - writel(pmcsr, &etdev->regs->global.pm_csr); + writel(pmcsr, &adapter->regs->global.pm_csr); /* Program gigE PHY in to Coma mode */ pmcsr |= ET_PM_PHY_SW_COMA; - writel(pmcsr, &etdev->regs->global.pm_csr); + writel(pmcsr, &adapter->regs->global.pm_csr); } /** * et1310_disable_phy_coma - Disable the Phy Coma Mode - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure */ -void et1310_disable_phy_coma(struct et131x_adapter *etdev) +void et1310_disable_phy_coma(struct et131x_adapter *adapter) { u32 pmcsr; - pmcsr = readl(&etdev->regs->global.pm_csr); + pmcsr = readl(&adapter->regs->global.pm_csr); /* Disable phy_sw_coma register and re-enable JAGCore clocks */ pmcsr |= ET_PMCSR_INIT; pmcsr &= ~ET_PM_PHY_SW_COMA; - writel(pmcsr, &etdev->regs->global.pm_csr); + writel(pmcsr, &adapter->regs->global.pm_csr); /* Restore the GbE PHY speed and duplex modes; * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY */ - etdev->ai_force_speed = etdev->pdown_speed; - etdev->ai_force_duplex = etdev->pdown_duplex; + adapter->ai_force_speed = adapter->pdown_speed; + adapter->ai_force_duplex = adapter->pdown_duplex; /* Re-initialize the send structures */ - et131x_init_send(etdev); + et131x_init_send(adapter); /* Reset the RFD list and re-start RU */ - et131x_reset_recv(etdev); + et131x_reset_recv(adapter); /* Bring the device back to the state it was during init prior to * autonegotiation being complete. This way, when we get the auto-neg * complete interrupt, we can complete init by calling ConfigMacREGS2. */ - et131x_soft_reset(etdev); + et131x_soft_reset(adapter); /* setup et1310 as per the documentation ?? */ - et131x_adapter_setup(etdev); + et131x_adapter_setup(adapter); /* Allow Tx to restart */ - etdev->flags &= ~fMP_ADAPTER_LOWER_POWER; + adapter->flags &= ~fMP_ADAPTER_LOWER_POWER; /* Need to re-enable Rx. */ - et131x_rx_dma_enable(etdev); + et131x_rx_dma_enable(adapter); } diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c index 09243092cb7e..e6458dbef934 100644 --- a/drivers/staging/et131x/et1310_rx.c +++ b/drivers/staging/et131x/et1310_rx.c @@ -605,19 +605,19 @@ int et131x_init_recv(struct et131x_adapter *adapter) /** * et131x_config_rx_dma_regs - Start of Rx_DMA init sequence - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure */ -void et131x_config_rx_dma_regs(struct et131x_adapter *etdev) +void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) { - struct rxdma_regs __iomem *rx_dma = &etdev->regs->rxdma; - struct rx_ring *rx_local = &etdev->rx_ring; + struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma; + struct rx_ring *rx_local = &adapter->rx_ring; struct fbr_desc *fbr_entry; u32 entry; u32 psr_num_des; unsigned long flags; /* Halt RXDMA to perform the reconfigure. */ - et131x_rx_dma_disable(etdev); + et131x_rx_dma_disable(adapter); /* Load the completion writeback physical address * @@ -645,7 +645,7 @@ void et131x_config_rx_dma_regs(struct et131x_adapter *etdev) writel((psr_num_des * LO_MARK_PERCENT_FOR_PSR) / 100, &rx_dma->psr_min_des); - spin_lock_irqsave(&etdev->rcv_lock, flags); + spin_lock_irqsave(&adapter->rcv_lock, flags); /* These local variables track the PSR in the adapter structure */ rx_local->local_psr_full = 0; @@ -715,34 +715,34 @@ void et131x_config_rx_dma_regs(struct et131x_adapter *etdev) */ writel(PARM_RX_TIME_INT_DEF, &rx_dma->max_pkt_time); - spin_unlock_irqrestore(&etdev->rcv_lock, flags); + spin_unlock_irqrestore(&adapter->rcv_lock, flags); } /** * et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate. - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure */ -void et131x_set_rx_dma_timer(struct et131x_adapter *etdev) +void et131x_set_rx_dma_timer(struct et131x_adapter *adapter) { /* For version B silicon, we do not use the RxDMA timer for 10 and 100 * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing. */ - if ((etdev->linkspeed == TRUEPHY_SPEED_100MBPS) || - (etdev->linkspeed == TRUEPHY_SPEED_10MBPS)) { - writel(0, &etdev->regs->rxdma.max_pkt_time); - writel(1, &etdev->regs->rxdma.num_pkt_done); + if ((adapter->linkspeed == TRUEPHY_SPEED_100MBPS) || + (adapter->linkspeed == TRUEPHY_SPEED_10MBPS)) { + writel(0, &adapter->regs->rxdma.max_pkt_time); + writel(1, &adapter->regs->rxdma.num_pkt_done); } } /** * NICReturnRFD - Recycle a RFD and put it back onto the receive list - * @etdev: pointer to our adapter + * @adapter: pointer to our adapter * @rfd: pointer to the RFD */ -static void nic_return_rfd(struct et131x_adapter *etdev, struct rfd *rfd) +static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) { - struct rx_ring *rx_local = &etdev->rx_ring; - struct rxdma_regs __iomem *rx_dma = &etdev->regs->rxdma; + struct rx_ring *rx_local = &adapter->rx_ring; + struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma; u16 buff_index = rfd->bufferindex; u8 ring_index = rfd->ringindex; unsigned long flags; @@ -755,7 +755,7 @@ static void nic_return_rfd(struct et131x_adapter *etdev, struct rfd *rfd) (ring_index == 0 && buff_index < rx_local->fbr0_num_entries) || #endif (ring_index == 1 && buff_index < rx_local->fbr1_num_entries)) { - spin_lock_irqsave(&etdev->fbr_lock, flags); + spin_lock_irqsave(&adapter->fbr_lock, flags); if (ring_index == 1) { struct fbr_desc *next = @@ -793,38 +793,38 @@ static void nic_return_rfd(struct et131x_adapter *etdev, struct rfd *rfd) &rx_dma->fbr0_full_offset); } #endif - spin_unlock_irqrestore(&etdev->fbr_lock, flags); + spin_unlock_irqrestore(&adapter->fbr_lock, flags); } else { - dev_err(&etdev->pdev->dev, + dev_err(&adapter->pdev->dev, "%s illegal Buffer Index returned\n", __func__); } /* The processing on this RFD is done, so put it back on the tail of * our list */ - spin_lock_irqsave(&etdev->rcv_lock, flags); + spin_lock_irqsave(&adapter->rcv_lock, flags); list_add_tail(&rfd->list_node, &rx_local->recv_list); rx_local->num_ready_recv++; - spin_unlock_irqrestore(&etdev->rcv_lock, flags); + spin_unlock_irqrestore(&adapter->rcv_lock, flags); WARN_ON(rx_local->num_ready_recv > rx_local->num_rfd); } /** * et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310 - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure */ -void et131x_rx_dma_disable(struct et131x_adapter *etdev) +void et131x_rx_dma_disable(struct et131x_adapter *adapter) { u32 csr; /* Setup the receive dma configuration register */ - writel(0x00002001, &etdev->regs->rxdma.csr); - csr = readl(&etdev->regs->rxdma.csr); + writel(0x00002001, &adapter->regs->rxdma.csr); + csr = readl(&adapter->regs->rxdma.csr); if ((csr & 0x00020000) == 0) { /* Check halt status (bit 17) */ udelay(5); - csr = readl(&etdev->regs->rxdma.csr); + csr = readl(&adapter->regs->rxdma.csr); if ((csr & 0x00020000) == 0) - dev_err(&etdev->pdev->dev, + dev_err(&adapter->pdev->dev, "RX Dma failed to enter halt state. CSR 0x%08x\n", csr); } @@ -832,36 +832,36 @@ void et131x_rx_dma_disable(struct et131x_adapter *etdev) /** * et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310. - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure */ -void et131x_rx_dma_enable(struct et131x_adapter *etdev) +void et131x_rx_dma_enable(struct et131x_adapter *adapter) { /* Setup the receive dma configuration register for normal operation */ u32 csr = 0x2000; /* FBR1 enable */ - if (etdev->rx_ring.fbr1_buffsize == 4096) + if (adapter->rx_ring.fbr1_buffsize == 4096) csr |= 0x0800; - else if (etdev->rx_ring.fbr1_buffsize == 8192) + else if (adapter->rx_ring.fbr1_buffsize == 8192) csr |= 0x1000; - else if (etdev->rx_ring.fbr1_buffsize == 16384) + else if (adapter->rx_ring.fbr1_buffsize == 16384) csr |= 0x1800; #ifdef USE_FBR0 csr |= 0x0400; /* FBR0 enable */ - if (etdev->rx_ring.fbr0_buffsize == 256) + if (adapter->rx_ring.fbr0_buffsize == 256) csr |= 0x0100; - else if (etdev->rx_ring.fbr0_buffsize == 512) + else if (adapter->rx_ring.fbr0_buffsize == 512) csr |= 0x0200; - else if (etdev->rx_ring.fbr0_buffsize == 1024) + else if (adapter->rx_ring.fbr0_buffsize == 1024) csr |= 0x0300; #endif - writel(csr, &etdev->regs->rxdma.csr); + writel(csr, &adapter->regs->rxdma.csr); - csr = readl(&etdev->regs->rxdma.csr); + csr = readl(&adapter->regs->rxdma.csr); if ((csr & 0x00020000) != 0) { udelay(5); - csr = readl(&etdev->regs->rxdma.csr); + csr = readl(&adapter->regs->rxdma.csr); if ((csr & 0x00020000) != 0) { - dev_err(&etdev->pdev->dev, + dev_err(&adapter->pdev->dev, "RX Dma failed to exit halt state. CSR 0x%08x\n", csr); } @@ -870,7 +870,7 @@ void et131x_rx_dma_enable(struct et131x_adapter *etdev) /** * nic_rx_pkts - Checks the hardware for available packets - * @etdev: pointer to our adapter + * @adapter: pointer to our adapter * * Returns rfd, a pointer to our MPRFD. * @@ -879,9 +879,9 @@ void et131x_rx_dma_enable(struct et131x_adapter *etdev) * the packet to it, puts the RFD in the RecvPendList, and also returns * the pointer to the RFD. */ -static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) +static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) { - struct rx_ring *rx_local = &etdev->rx_ring; + struct rx_ring *rx_local = &adapter->rx_ring; struct rx_status_block *status; struct pkt_stat_desc *psr; struct rfd *rfd; @@ -931,7 +931,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) } writel(rx_local->local_psr_full, - &etdev->regs->rxdma.psr_full_offset); + &adapter->regs->rxdma.psr_full_offset); #ifndef USE_FBR0 if (ring_index != 1) @@ -949,7 +949,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) #endif { /* Illegal buffer or ring index cannot be used by S/W*/ - dev_err(&etdev->pdev->dev, + dev_err(&adapter->pdev->dev, "NICRxPkts PSR Entry %d indicates " "length of %d and/or bad bi(%d)\n", rx_local->local_psr_full & 0xFFF, @@ -958,21 +958,21 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) } /* Get and fill the RFD. */ - spin_lock_irqsave(&etdev->rcv_lock, flags); + spin_lock_irqsave(&adapter->rcv_lock, flags); rfd = NULL; element = rx_local->recv_list.next; rfd = (struct rfd *) list_entry(element, struct rfd, list_node); if (rfd == NULL) { - spin_unlock_irqrestore(&etdev->rcv_lock, flags); + spin_unlock_irqrestore(&adapter->rcv_lock, flags); return NULL; } list_del(&rfd->list_node); rx_local->num_ready_recv--; - spin_unlock_irqrestore(&etdev->rcv_lock, flags); + spin_unlock_irqrestore(&adapter->rcv_lock, flags); rfd->bufferindex = buff_index; rfd->ringindex = ring_index; @@ -983,18 +983,18 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) * also counted here. */ if (len < (NIC_MIN_PACKET_SIZE + 4)) { - etdev->stats.rx_other_errs++; + adapter->stats.rx_other_errs++; len = 0; } if (len) { - if (etdev->replica_phy_loopbk == 1) { + if (adapter->replica_phy_loopbk == 1) { buf = rx_local->fbr[ring_index]->virt[buff_index]; - if (memcmp(&buf[6], etdev->addr, ETH_ALEN) == 0) { + if (memcmp(&buf[6], adapter->addr, ETH_ALEN) == 0) { if (memcmp(&buf[42], "Replica packet", ETH_HLEN)) { - etdev->replica_phy_loopbk_passfail = 1; + adapter->replica_phy_loopbk_passfail = 1; } } } @@ -1009,11 +1009,11 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) * filters. Generally filter is 0x2b when in * promiscuous mode. */ - if ((etdev->packet_filter & + if ((adapter->packet_filter & ET131X_PACKET_TYPE_MULTICAST) - && !(etdev->packet_filter & + && !(adapter->packet_filter & ET131X_PACKET_TYPE_PROMISCUOUS) - && !(etdev->packet_filter & + && !(adapter->packet_filter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { buf = rx_local->fbr[ring_index]-> virt[buff_index]; @@ -1022,20 +1022,20 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) * destination address of this packet * matches one in our list. */ - for (i = 0; i < etdev->multicast_addr_count; + for (i = 0; i < adapter->multicast_addr_count; i++) { if (buf[0] == - etdev->multicast_list[i][0] + adapter->multicast_list[i][0] && buf[1] == - etdev->multicast_list[i][1] + adapter->multicast_list[i][1] && buf[2] == - etdev->multicast_list[i][2] + adapter->multicast_list[i][2] && buf[3] == - etdev->multicast_list[i][3] + adapter->multicast_list[i][3] && buf[4] == - etdev->multicast_list[i][4] + adapter->multicast_list[i][4] && buf[5] == - etdev->multicast_list[i][5]) { + adapter->multicast_list[i][5]) { break; } } @@ -1048,21 +1048,21 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) * so we free our RFD when we return * from this function. */ - if (i == etdev->multicast_addr_count) + if (i == adapter->multicast_addr_count) len = 0; } if (len > 0) - etdev->stats.multicast_pkts_rcvd++; + adapter->stats.multicast_pkts_rcvd++; } else if (word0 & ALCATEL_BROADCAST_PKT) - etdev->stats.broadcast_pkts_rcvd++; + adapter->stats.broadcast_pkts_rcvd++; else /* Not sure what this counter measures in * promiscuous mode. Perhaps we should check * the MAC address to see if it is directed * to us in promiscuous mode. */ - etdev->stats.unicast_pkts_rcvd++; + adapter->stats.unicast_pkts_rcvd++; } if (len > 0) { @@ -1073,19 +1073,19 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) skb = dev_alloc_skb(rfd->len + 2); if (!skb) { - dev_err(&etdev->pdev->dev, + dev_err(&adapter->pdev->dev, "Couldn't alloc an SKB for Rx\n"); return NULL; } - etdev->net_stats.rx_bytes += rfd->len; + adapter->net_stats.rx_bytes += rfd->len; memcpy(skb_put(skb, rfd->len), rx_local->fbr[ring_index]->virt[buff_index], rfd->len); - skb->dev = etdev->netdev; - skb->protocol = eth_type_trans(skb, etdev->netdev); + skb->dev = adapter->netdev; + skb->protocol = eth_type_trans(skb, adapter->netdev); skb->ip_summed = CHECKSUM_NONE; netif_rx(skb); @@ -1093,28 +1093,28 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *etdev) rfd->len = 0; } - nic_return_rfd(etdev, rfd); + nic_return_rfd(adapter, rfd); return rfd; } /** * et131x_reset_recv - Reset the receive list - * @etdev: pointer to our adapter + * @adapter: pointer to our adapter * * Assumption, Rcv spinlock has been acquired. */ -void et131x_reset_recv(struct et131x_adapter *etdev) +void et131x_reset_recv(struct et131x_adapter *adapter) { - WARN_ON(list_empty(&etdev->rx_ring.recv_list)); + WARN_ON(list_empty(&adapter->rx_ring.recv_list)); } /** * et131x_handle_recv_interrupt - Interrupt handler for receive processing - * @etdev: pointer to our adapter + * @adapter: pointer to our adapter * * Assumption, Rcv spinlock has been acquired. */ -void et131x_handle_recv_interrupt(struct et131x_adapter *etdev) +void et131x_handle_recv_interrupt(struct et131x_adapter *adapter) { struct rfd *rfd = NULL; u32 count = 0; @@ -1122,13 +1122,13 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *etdev) /* Process up to available RFD's */ while (count < NUM_PACKETS_HANDLED) { - if (list_empty(&etdev->rx_ring.recv_list)) { - WARN_ON(etdev->rx_ring.num_ready_recv != 0); + if (list_empty(&adapter->rx_ring.recv_list)) { + WARN_ON(adapter->rx_ring.num_ready_recv != 0); done = false; break; } - rfd = nic_rx_pkts(etdev); + rfd = nic_rx_pkts(adapter); if (rfd == NULL) break; @@ -1138,28 +1138,28 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *etdev) * If length is zero, return the RFD in order to advance the * Free buffer ring. */ - if (!etdev->packet_filter || - !netif_carrier_ok(etdev->netdev) || + if (!adapter->packet_filter || + !netif_carrier_ok(adapter->netdev) || rfd->len == 0) continue; /* Increment the number of packets we received */ - etdev->net_stats.rx_packets++; + adapter->net_stats.rx_packets++; /* Set the status on the packet, either resources or success */ - if (etdev->rx_ring.num_ready_recv < RFD_LOW_WATER_MARK) { - dev_warn(&etdev->pdev->dev, + if (adapter->rx_ring.num_ready_recv < RFD_LOW_WATER_MARK) { + dev_warn(&adapter->pdev->dev, "RFD's are running out\n"); } count++; } if (count == NUM_PACKETS_HANDLED || !done) { - etdev->rx_ring.unfinished_receives = true; + adapter->rx_ring.unfinished_receives = true; writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, - &etdev->regs->global.watchdog_timer); + &adapter->regs->global.watchdog_timer); } else /* Watchdog timer will disable itself if appropriate. */ - etdev->rx_ring.unfinished_receives = false; + adapter->rx_ring.unfinished_receives = false; } diff --git a/drivers/staging/et131x/et1310_tx.c b/drivers/staging/et131x/et1310_tx.c index eb8552b251da..f8211048f6b8 100644 --- a/drivers/staging/et131x/et1310_tx.c +++ b/drivers/staging/et131x/et1310_tx.c @@ -181,59 +181,59 @@ void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) /** * et131x_config_tx_dma_regs - Set up the tx dma section of the JAGCore. - * @etdev: pointer to our private adapter structure + * @adapter: pointer to our private adapter structure * * Configure the transmit engine with the ring buffers we have created * and prepare it for use. */ -void et131x_config_tx_dma_regs(struct et131x_adapter *etdev) +void et131x_config_tx_dma_regs(struct et131x_adapter *adapter) { - struct txdma_regs __iomem *txdma = &etdev->regs->txdma; + struct txdma_regs __iomem *txdma = &adapter->regs->txdma; /* Load the hardware with the start of the transmit descriptor ring. */ - writel((u32) ((u64)etdev->tx_ring.tx_desc_ring_pa >> 32), + writel((u32) ((u64)adapter->tx_ring.tx_desc_ring_pa >> 32), &txdma->pr_base_hi); - writel((u32) etdev->tx_ring.tx_desc_ring_pa, + writel((u32) adapter->tx_ring.tx_desc_ring_pa, &txdma->pr_base_lo); /* Initialise the transmit DMA engine */ writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des); /* Load the completion writeback physical address */ - writel((u32)((u64)etdev->tx_ring.tx_status_pa >> 32), + writel((u32)((u64)adapter->tx_ring.tx_status_pa >> 32), &txdma->dma_wb_base_hi); - writel((u32)etdev->tx_ring.tx_status_pa, &txdma->dma_wb_base_lo); + writel((u32)adapter->tx_ring.tx_status_pa, &txdma->dma_wb_base_lo); - *etdev->tx_ring.tx_status = 0; + *adapter->tx_ring.tx_status = 0; writel(0, &txdma->service_request); - etdev->tx_ring.send_idx = 0; + adapter->tx_ring.send_idx = 0; } /** * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310 - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure */ -void et131x_tx_dma_disable(struct et131x_adapter *etdev) +void et131x_tx_dma_disable(struct et131x_adapter *adapter) { /* Setup the tramsmit dma configuration register */ writel(ET_TXDMA_CSR_HALT|ET_TXDMA_SNGL_EPKT, - &etdev->regs->txdma.csr); + &adapter->regs->txdma.csr); } /** * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310. - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure * * Mainly used after a return to the D0 (full-power) state from a lower state. */ -void et131x_tx_dma_enable(struct et131x_adapter *etdev) +void et131x_tx_dma_enable(struct et131x_adapter *adapter) { /* Setup the transmit dma configuration register for normal * operation */ writel(ET_TXDMA_SNGL_EPKT|(PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT), - &etdev->regs->txdma.csr); + &adapter->regs->txdma.csr); } /** @@ -272,12 +272,12 @@ void et131x_init_send(struct et131x_adapter *adapter) /** * nic_send_packet - NIC specific send handler for version B silicon. - * @etdev: pointer to our adapter + * @adapter: pointer to our adapter * @tcb: pointer to struct tcb * * Returns 0 or errno. */ -static int nic_send_packet(struct et131x_adapter *etdev, struct tcb *tcb) +static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) { u32 i; struct tx_desc desc[24]; /* 24 x 16 byte */ @@ -331,7 +331,7 @@ static int nic_send_packet(struct et131x_adapter *etdev, struct tcb *tcb) * subsystem) */ desc[frag++].addr_lo = - pci_map_single(etdev->pdev, + pci_map_single(adapter->pdev, skb->data, skb->len - skb->data_len, @@ -350,7 +350,7 @@ static int nic_send_packet(struct et131x_adapter *etdev, struct tcb *tcb) * subsystem) */ desc[frag++].addr_lo = - pci_map_single(etdev->pdev, + pci_map_single(adapter->pdev, skb->data, ((skb->len - skb->data_len) / 2), @@ -369,7 +369,7 @@ static int nic_send_packet(struct et131x_adapter *etdev, struct tcb *tcb) * subsystem) */ desc[frag++].addr_lo = - pci_map_single(etdev->pdev, + pci_map_single(adapter->pdev, skb->data + ((skb->len - skb->data_len) / 2), @@ -389,7 +389,7 @@ static int nic_send_packet(struct et131x_adapter *etdev, struct tcb *tcb) * addressable (as defined by the pci/dma subsystem) */ desc[frag++].addr_lo = - pci_map_page(etdev->pdev, + pci_map_page(adapter->pdev, frags[i - 1].page, frags[i - 1].page_offset, frags[i - 1].size, @@ -400,11 +400,11 @@ static int nic_send_packet(struct et131x_adapter *etdev, struct tcb *tcb) if (frag == 0) return -EIO; - if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS) { - if (++etdev->tx_ring.since_irq == PARM_TX_NUM_BUFS_DEF) { + if (adapter->linkspeed == TRUEPHY_SPEED_1000MBPS) { + if (++adapter->tx_ring.since_irq == PARM_TX_NUM_BUFS_DEF) { /* Last element & Interrupt flag */ desc[frag - 1].flags = 0x5; - etdev->tx_ring.since_irq = 0; + adapter->tx_ring.since_irq = 0; } else { /* Last element */ desc[frag - 1].flags = 0x1; } @@ -413,13 +413,13 @@ static int nic_send_packet(struct et131x_adapter *etdev, struct tcb *tcb) desc[0].flags |= 2; /* First element flag */ - tcb->index_start = etdev->tx_ring.send_idx; + tcb->index_start = adapter->tx_ring.send_idx; tcb->stale = 0; - spin_lock_irqsave(&etdev->send_hw_lock, flags); + spin_lock_irqsave(&adapter->send_hw_lock, flags); thiscopy = NUM_DESC_PER_RING_TX - - INDEX10(etdev->tx_ring.send_idx); + INDEX10(adapter->tx_ring.send_idx); if (thiscopy >= frag) { remainder = 0; @@ -428,61 +428,61 @@ static int nic_send_packet(struct et131x_adapter *etdev, struct tcb *tcb) remainder = frag - thiscopy; } - memcpy(etdev->tx_ring.tx_desc_ring + - INDEX10(etdev->tx_ring.send_idx), desc, + memcpy(adapter->tx_ring.tx_desc_ring + + INDEX10(adapter->tx_ring.send_idx), desc, sizeof(struct tx_desc) * thiscopy); - add_10bit(&etdev->tx_ring.send_idx, thiscopy); + add_10bit(&adapter->tx_ring.send_idx, thiscopy); - if (INDEX10(etdev->tx_ring.send_idx) == 0 || - INDEX10(etdev->tx_ring.send_idx) == NUM_DESC_PER_RING_TX) { - etdev->tx_ring.send_idx &= ~ET_DMA10_MASK; - etdev->tx_ring.send_idx ^= ET_DMA10_WRAP; + if (INDEX10(adapter->tx_ring.send_idx) == 0 || + INDEX10(adapter->tx_ring.send_idx) == NUM_DESC_PER_RING_TX) { + adapter->tx_ring.send_idx &= ~ET_DMA10_MASK; + adapter->tx_ring.send_idx ^= ET_DMA10_WRAP; } if (remainder) { - memcpy(etdev->tx_ring.tx_desc_ring, + memcpy(adapter->tx_ring.tx_desc_ring, desc + thiscopy, sizeof(struct tx_desc) * remainder); - add_10bit(&etdev->tx_ring.send_idx, remainder); + add_10bit(&adapter->tx_ring.send_idx, remainder); } - if (INDEX10(etdev->tx_ring.send_idx) == 0) { - if (etdev->tx_ring.send_idx) + if (INDEX10(adapter->tx_ring.send_idx) == 0) { + if (adapter->tx_ring.send_idx) tcb->index = NUM_DESC_PER_RING_TX - 1; else tcb->index = ET_DMA10_WRAP|(NUM_DESC_PER_RING_TX - 1); } else - tcb->index = etdev->tx_ring.send_idx - 1; + tcb->index = adapter->tx_ring.send_idx - 1; - spin_lock(&etdev->tcb_send_qlock); + spin_lock(&adapter->tcb_send_qlock); - if (etdev->tx_ring.send_tail) - etdev->tx_ring.send_tail->next = tcb; + if (adapter->tx_ring.send_tail) + adapter->tx_ring.send_tail->next = tcb; else - etdev->tx_ring.send_head = tcb; + adapter->tx_ring.send_head = tcb; - etdev->tx_ring.send_tail = tcb; + adapter->tx_ring.send_tail = tcb; WARN_ON(tcb->next != NULL); - etdev->tx_ring.used++; + adapter->tx_ring.used++; - spin_unlock(&etdev->tcb_send_qlock); + spin_unlock(&adapter->tcb_send_qlock); /* Write the new write pointer back to the device. */ - writel(etdev->tx_ring.send_idx, - &etdev->regs->txdma.service_request); + writel(adapter->tx_ring.send_idx, + &adapter->regs->txdma.service_request); /* For Gig only, we use Tx Interrupt coalescing. Enable the software * timer to wake us up if this packet isn't followed by N more. */ - if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS) { + if (adapter->linkspeed == TRUEPHY_SPEED_1000MBPS) { writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, - &etdev->regs->global.watchdog_timer); + &adapter->regs->global.watchdog_timer); } - spin_unlock_irqrestore(&etdev->send_hw_lock, flags); + spin_unlock_irqrestore(&adapter->send_hw_lock, flags); return 0; } @@ -490,13 +490,13 @@ static int nic_send_packet(struct et131x_adapter *etdev, struct tcb *tcb) /** * send_packet - Do the work to send a packet * @skb: the packet(s) to send - * @etdev: a pointer to the device's private adapter structure + * @adapter: a pointer to the device's private adapter structure * * Return 0 in almost all cases; non-zero value in extreme hard failure only. * * Assumption: Send spinlock has been acquired */ -static int send_packet(struct sk_buff *skb, struct et131x_adapter *etdev) +static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) { int status; struct tcb *tcb = NULL; @@ -508,21 +508,21 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *etdev) return -EIO; /* Get a TCB for this packet */ - spin_lock_irqsave(&etdev->tcb_ready_qlock, flags); + spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); - tcb = etdev->tx_ring.tcb_qhead; + tcb = adapter->tx_ring.tcb_qhead; if (tcb == NULL) { - spin_unlock_irqrestore(&etdev->tcb_ready_qlock, flags); + spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); return -ENOMEM; } - etdev->tx_ring.tcb_qhead = tcb->next; + adapter->tx_ring.tcb_qhead = tcb->next; - if (etdev->tx_ring.tcb_qhead == NULL) - etdev->tx_ring.tcb_qtail = NULL; + if (adapter->tx_ring.tcb_qhead == NULL) + adapter->tx_ring.tcb_qtail = NULL; - spin_unlock_irqrestore(&etdev->tcb_ready_qlock, flags); + spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); tcb->skb = skb; @@ -540,22 +540,22 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *etdev) tcb->next = NULL; /* Call the NIC specific send handler. */ - status = nic_send_packet(etdev, tcb); + status = nic_send_packet(adapter, tcb); if (status != 0) { - spin_lock_irqsave(&etdev->tcb_ready_qlock, flags); + spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); - if (etdev->tx_ring.tcb_qtail) - etdev->tx_ring.tcb_qtail->next = tcb; + if (adapter->tx_ring.tcb_qtail) + adapter->tx_ring.tcb_qtail->next = tcb; else /* Apparently ready Q is empty. */ - etdev->tx_ring.tcb_qhead = tcb; + adapter->tx_ring.tcb_qhead = tcb; - etdev->tx_ring.tcb_qtail = tcb; - spin_unlock_irqrestore(&etdev->tcb_ready_qlock, flags); + adapter->tx_ring.tcb_qtail = tcb; + spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); return status; } - WARN_ON(etdev->tx_ring.used > NUM_TCB); + WARN_ON(adapter->tx_ring.used > NUM_TCB); return 0; } @@ -569,9 +569,9 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *etdev) int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) { int status = 0; - struct et131x_adapter *etdev = NULL; + struct et131x_adapter *adapter = NULL; - etdev = netdev_priv(netdev); + adapter = netdev_priv(netdev); /* Send these packets * @@ -580,7 +580,7 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) */ /* TCB is not available */ - if (etdev->tx_ring.used >= NUM_TCB) { + if (adapter->tx_ring.used >= NUM_TCB) { /* NOTE: If there's an error on send, no need to queue the * packet under Linux; if we just send an error up to the * netif layer, it will resend the skb to us. @@ -590,21 +590,21 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) /* We need to see if the link is up; if it's not, make the * netif layer think we're good and drop the packet */ - if ((etdev->flags & fMP_ADAPTER_FAIL_SEND_MASK) || + if ((adapter->flags & fMP_ADAPTER_FAIL_SEND_MASK) || !netif_carrier_ok(netdev)) { dev_kfree_skb_any(skb); skb = NULL; - etdev->net_stats.tx_dropped++; + adapter->net_stats.tx_dropped++; } else { - status = send_packet(skb, etdev); + status = send_packet(skb, adapter); if (status != 0 && status != -ENOMEM) { /* On any other error, make netif think we're * OK and drop the packet */ dev_kfree_skb_any(skb); skb = NULL; - etdev->net_stats.tx_dropped++; + adapter->net_stats.tx_dropped++; } } } @@ -613,25 +613,25 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) /** * free_send_packet - Recycle a struct tcb - * @etdev: pointer to our adapter + * @adapter: pointer to our adapter * @tcb: pointer to struct tcb * * Complete the packet if necessary * Assumption - Send spinlock has been acquired */ -static inline void free_send_packet(struct et131x_adapter *etdev, +static inline void free_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) { unsigned long flags; struct tx_desc *desc = NULL; - struct net_device_stats *stats = &etdev->net_stats; + struct net_device_stats *stats = &adapter->net_stats; if (tcb->flags & fMP_DEST_BROAD) - atomic_inc(&etdev->stats.broadcast_pkts_xmtd); + atomic_inc(&adapter->stats.broadcast_pkts_xmtd); else if (tcb->flags & fMP_DEST_MULTI) - atomic_inc(&etdev->stats.multicast_pkts_xmtd); + atomic_inc(&adapter->stats.multicast_pkts_xmtd); else - atomic_inc(&etdev->stats.unicast_pkts_xmtd); + atomic_inc(&adapter->stats.unicast_pkts_xmtd); if (tcb->skb) { stats->tx_bytes += tcb->skb->len; @@ -641,10 +641,10 @@ static inline void free_send_packet(struct et131x_adapter *etdev, * they point to */ do { - desc = (struct tx_desc *)(etdev->tx_ring.tx_desc_ring + + desc = (struct tx_desc *)(adapter->tx_ring.tx_desc_ring + INDEX10(tcb->index_start)); - pci_unmap_single(etdev->pdev, + pci_unmap_single(adapter->pdev, desc->addr_lo, desc->len_vlan, PCI_DMA_TODEVICE); @@ -654,7 +654,7 @@ static inline void free_send_packet(struct et131x_adapter *etdev, tcb->index_start &= ~ET_DMA10_MASK; tcb->index_start ^= ET_DMA10_WRAP; } - } while (desc != (etdev->tx_ring.tx_desc_ring + + } while (desc != (adapter->tx_ring.tx_desc_ring + INDEX10(tcb->index))); dev_kfree_skb_any(tcb->skb); @@ -663,127 +663,127 @@ static inline void free_send_packet(struct et131x_adapter *etdev, memset(tcb, 0, sizeof(struct tcb)); /* Add the TCB to the Ready Q */ - spin_lock_irqsave(&etdev->tcb_ready_qlock, flags); + spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); - etdev->net_stats.tx_packets++; + adapter->net_stats.tx_packets++; - if (etdev->tx_ring.tcb_qtail) - etdev->tx_ring.tcb_qtail->next = tcb; + if (adapter->tx_ring.tcb_qtail) + adapter->tx_ring.tcb_qtail->next = tcb; else /* Apparently ready Q is empty. */ - etdev->tx_ring.tcb_qhead = tcb; + adapter->tx_ring.tcb_qhead = tcb; - etdev->tx_ring.tcb_qtail = tcb; + adapter->tx_ring.tcb_qtail = tcb; - spin_unlock_irqrestore(&etdev->tcb_ready_qlock, flags); - WARN_ON(etdev->tx_ring.used < 0); + spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); + WARN_ON(adapter->tx_ring.used < 0); } /** * et131x_free_busy_send_packets - Free and complete the stopped active sends - * @etdev: pointer to our adapter + * @adapter: pointer to our adapter * * Assumption - Send spinlock has been acquired */ -void et131x_free_busy_send_packets(struct et131x_adapter *etdev) +void et131x_free_busy_send_packets(struct et131x_adapter *adapter) { struct tcb *tcb; unsigned long flags; u32 freed = 0; /* Any packets being sent? Check the first TCB on the send list */ - spin_lock_irqsave(&etdev->tcb_send_qlock, flags); + spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - tcb = etdev->tx_ring.send_head; + tcb = adapter->tx_ring.send_head; while (tcb != NULL && freed < NUM_TCB) { struct tcb *next = tcb->next; - etdev->tx_ring.send_head = next; + adapter->tx_ring.send_head = next; if (next == NULL) - etdev->tx_ring.send_tail = NULL; + adapter->tx_ring.send_tail = NULL; - etdev->tx_ring.used--; + adapter->tx_ring.used--; - spin_unlock_irqrestore(&etdev->tcb_send_qlock, flags); + spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); freed++; - free_send_packet(etdev, tcb); + free_send_packet(adapter, tcb); - spin_lock_irqsave(&etdev->tcb_send_qlock, flags); + spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - tcb = etdev->tx_ring.send_head; + tcb = adapter->tx_ring.send_head; } WARN_ON(freed == NUM_TCB); - spin_unlock_irqrestore(&etdev->tcb_send_qlock, flags); + spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); - etdev->tx_ring.used = 0; + adapter->tx_ring.used = 0; } /** * et131x_handle_send_interrupt - Interrupt handler for sending processing - * @etdev: pointer to our adapter + * @adapter: pointer to our adapter * * Re-claim the send resources, complete sends and get more to send from * the send wait queue. * * Assumption - Send spinlock has been acquired */ -void et131x_handle_send_interrupt(struct et131x_adapter *etdev) +void et131x_handle_send_interrupt(struct et131x_adapter *adapter) { unsigned long flags; u32 serviced; struct tcb *tcb; u32 index; - serviced = readl(&etdev->regs->txdma.new_service_complete); + serviced = readl(&adapter->regs->txdma.new_service_complete); index = INDEX10(serviced); /* Has the ring wrapped? Process any descriptors that do not have * the same "wrap" indicator as the current completion indicator */ - spin_lock_irqsave(&etdev->tcb_send_qlock, flags); + spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - tcb = etdev->tx_ring.send_head; + tcb = adapter->tx_ring.send_head; while (tcb && ((serviced ^ tcb->index) & ET_DMA10_WRAP) && index < INDEX10(tcb->index)) { - etdev->tx_ring.used--; - etdev->tx_ring.send_head = tcb->next; + adapter->tx_ring.used--; + adapter->tx_ring.send_head = tcb->next; if (tcb->next == NULL) - etdev->tx_ring.send_tail = NULL; + adapter->tx_ring.send_tail = NULL; - spin_unlock_irqrestore(&etdev->tcb_send_qlock, flags); - free_send_packet(etdev, tcb); - spin_lock_irqsave(&etdev->tcb_send_qlock, flags); + spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); + free_send_packet(adapter, tcb); + spin_lock_irqsave(&adapter->tcb_send_qlock, flags); /* Goto the next packet */ - tcb = etdev->tx_ring.send_head; + tcb = adapter->tx_ring.send_head; } while (tcb && !((serviced ^ tcb->index) & ET_DMA10_WRAP) && index > (tcb->index & ET_DMA10_MASK)) { - etdev->tx_ring.used--; - etdev->tx_ring.send_head = tcb->next; + adapter->tx_ring.used--; + adapter->tx_ring.send_head = tcb->next; if (tcb->next == NULL) - etdev->tx_ring.send_tail = NULL; + adapter->tx_ring.send_tail = NULL; - spin_unlock_irqrestore(&etdev->tcb_send_qlock, flags); - free_send_packet(etdev, tcb); - spin_lock_irqsave(&etdev->tcb_send_qlock, flags); + spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); + free_send_packet(adapter, tcb); + spin_lock_irqsave(&adapter->tcb_send_qlock, flags); /* Goto the next packet */ - tcb = etdev->tx_ring.send_head; + tcb = adapter->tx_ring.send_head; } /* Wake up the queue when we hit a low-water mark */ - if (etdev->tx_ring.used <= NUM_TCB / 3) - netif_wake_queue(etdev->netdev); + if (adapter->tx_ring.used <= NUM_TCB / 3) + netif_wake_queue(adapter->netdev); - spin_unlock_irqrestore(&etdev->tcb_send_qlock, flags); + spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); } diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index 32a20ddaac52..59637c631953 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -263,38 +263,38 @@ static int et131x_pci_init(struct et131x_adapter *adapter, */ void et131x_error_timer_handler(unsigned long data) { - struct et131x_adapter *etdev = (struct et131x_adapter *) data; + struct et131x_adapter *adapter = (struct et131x_adapter *) data; u32 pm_csr; - pm_csr = readl(&etdev->regs->global.pm_csr); + pm_csr = readl(&adapter->regs->global.pm_csr); if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) - et1310_update_macstat_host_counters(etdev); + et1310_update_macstat_host_counters(adapter); else - dev_err(&etdev->pdev->dev, + dev_err(&adapter->pdev->dev, "No interrupts, in PHY coma, pm_csr = 0x%x\n", pm_csr); - if (!(etdev->bmsr & MI_BMSR_LINK_STATUS) && - etdev->registry_phy_coma && - etdev->boot_coma < 11) { - etdev->boot_coma++; + if (!(adapter->bmsr & MI_BMSR_LINK_STATUS) && + adapter->registry_phy_coma && + adapter->boot_coma < 11) { + adapter->boot_coma++; } - if (etdev->boot_coma == 10) { - if (!(etdev->bmsr & MI_BMSR_LINK_STATUS) - && etdev->registry_phy_coma) { + if (adapter->boot_coma == 10) { + if (!(adapter->bmsr & MI_BMSR_LINK_STATUS) + && adapter->registry_phy_coma) { if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) { /* NOTE - This was originally a 'sync with * interrupt'. How to do that under Linux? */ - et131x_enable_interrupts(etdev); - et1310_enable_phy_coma(etdev); + et131x_enable_interrupts(adapter); + et1310_enable_phy_coma(adapter); } } } /* This is a periodic timer, so reschedule */ - mod_timer(&etdev->error_timer, jiffies + + mod_timer(&adapter->error_timer, jiffies + TX_ERROR_PERIOD * HZ / 1000); } @@ -305,34 +305,34 @@ void et131x_error_timer_handler(unsigned long data) */ void et131x_link_detection_handler(unsigned long data) { - struct et131x_adapter *etdev = (struct et131x_adapter *) data; + struct et131x_adapter *adapter = (struct et131x_adapter *) data; unsigned long flags; - if (etdev->media_state == 0) { - spin_lock_irqsave(&etdev->lock, flags); + if (adapter->media_state == 0) { + spin_lock_irqsave(&adapter->lock, flags); - etdev->media_state = NETIF_STATUS_MEDIA_DISCONNECT; + adapter->media_state = NETIF_STATUS_MEDIA_DISCONNECT; - spin_unlock_irqrestore(&etdev->lock, flags); + spin_unlock_irqrestore(&adapter->lock, flags); - netif_carrier_off(etdev->netdev); + netif_carrier_off(adapter->netdev); } } /** * et131x_configure_global_regs - configure JAGCore global regs - * @etdev: pointer to our adapter structure + * @adapter: pointer to our adapter structure * * Used to configure the global registers on the JAGCore */ -void et131x_configure_global_regs(struct et131x_adapter *etdev) +void et131x_configure_global_regs(struct et131x_adapter *adapter) { - struct global_regs __iomem *regs = &etdev->regs->global; + struct global_regs __iomem *regs = &adapter->regs->global; writel(0, ®s->rxq_start_addr); writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); - if (etdev->registry_jumbo_packet < 2048) { + if (adapter->registry_jumbo_packet < 2048) { /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word * block of RAM that the driver can split between Tx * and Rx as it desires. Our default is to split it @@ -340,7 +340,7 @@ void et131x_configure_global_regs(struct et131x_adapter *etdev) */ writel(PARM_RX_MEM_END_DEF, ®s->rxq_end_addr); writel(PARM_RX_MEM_END_DEF + 1, ®s->txq_start_addr); - } else if (etdev->registry_jumbo_packet < 8192) { + } else if (adapter->registry_jumbo_packet < 8192) { /* For jumbo packets > 2k but < 8k, split 50-50. */ writel(INTERNAL_MEM_RX_OFFSET, ®s->rxq_end_addr); writel(INTERNAL_MEM_RX_OFFSET + 1, ®s->txq_start_addr); @@ -368,59 +368,59 @@ void et131x_configure_global_regs(struct et131x_adapter *etdev) /** * et131x_adapter_setup - Set the adapter up as per cassini+ documentation - * @etdev: pointer to our private adapter structure + * @adapter: pointer to our private adapter structure * * Returns 0 on success, errno on failure (as defined in errno.h) */ -int et131x_adapter_setup(struct et131x_adapter *etdev) +int et131x_adapter_setup(struct et131x_adapter *adapter) { int status = 0; /* Configure the JAGCore */ - et131x_configure_global_regs(etdev); + et131x_configure_global_regs(adapter); - et1310_config_mac_regs1(etdev); + et1310_config_mac_regs1(adapter); /* Configure the MMC registers */ /* All we need to do is initialize the Memory Control Register */ - writel(ET_MMC_ENABLE, &etdev->regs->mmc.mmc_ctrl); + writel(ET_MMC_ENABLE, &adapter->regs->mmc.mmc_ctrl); - et1310_config_rxmac_regs(etdev); - et1310_config_txmac_regs(etdev); + et1310_config_rxmac_regs(adapter); + et1310_config_txmac_regs(adapter); - et131x_config_rx_dma_regs(etdev); - et131x_config_tx_dma_regs(etdev); + et131x_config_rx_dma_regs(adapter); + et131x_config_tx_dma_regs(adapter); - et1310_config_macstat_regs(etdev); + et1310_config_macstat_regs(adapter); /* Move the following code to Timer function?? */ - status = et131x_xcvr_find(etdev); + status = et131x_xcvr_find(adapter); if (status != 0) - dev_warn(&etdev->pdev->dev, "Could not find the xcvr\n"); + dev_warn(&adapter->pdev->dev, "Could not find the xcvr\n"); /* Prepare the TRUEPHY library. */ - et1310_phy_init(etdev); + et1310_phy_init(adapter); /* Reset the phy now so changes take place */ - et1310_phy_reset(etdev); + et1310_phy_reset(adapter); /* Power down PHY */ - et1310_phy_power_down(etdev, 1); + et1310_phy_power_down(adapter, 1); /* * We need to turn off 1000 base half dulplex, the mac does not * support it. For the 10/100 part, turn off all gig advertisement */ - if (etdev->pdev->device != ET131X_PCI_DEVICE_ID_FAST) - et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); + if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST) + et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_FULL); else - et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + et1310_phy_advertise_1000BaseT(adapter, TRUEPHY_ADV_DUPLEX_NONE); /* Power up PHY */ - et1310_phy_power_down(etdev, 0); + et1310_phy_power_down(adapter, 0); - et131x_setphy_normal(etdev); + et131x_setphy_normal(adapter); return status; } @@ -518,7 +518,7 @@ void et131x_adapter_memory_free(struct et131x_adapter *adapter) /** * et131x_adapter_init - * @etdev: pointer to the private adapter struct + * @adapter: pointer to the private adapter struct * @pdev: pointer to the PCI device * * Initialize the data structures for the et131x_adapter object and link @@ -531,41 +531,41 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev, static const u8 duplex[] = { 0, 1, 2, 1, 2, 2 }; static const u16 speed[] = { 0, 10, 10, 100, 100, 1000 }; - struct et131x_adapter *etdev; + struct et131x_adapter *adapter; /* Setup the fundamental net_device and private adapter structure * elements */ SET_NETDEV_DEV(netdev, &pdev->dev); /* Allocate private adapter struct and copy in relevant information */ - etdev = netdev_priv(netdev); - etdev->pdev = pci_dev_get(pdev); - etdev->netdev = netdev; + adapter = netdev_priv(netdev); + adapter->pdev = pci_dev_get(pdev); + adapter->netdev = netdev; /* Do the same for the netdev struct */ netdev->irq = pdev->irq; netdev->base_addr = pci_resource_start(pdev, 0); /* Initialize spinlocks here */ - spin_lock_init(&etdev->lock); - spin_lock_init(&etdev->tcb_send_qlock); - spin_lock_init(&etdev->tcb_ready_qlock); - spin_lock_init(&etdev->send_hw_lock); - spin_lock_init(&etdev->rcv_lock); - spin_lock_init(&etdev->rcv_pend_lock); - spin_lock_init(&etdev->fbr_lock); - spin_lock_init(&etdev->phy_lock); + spin_lock_init(&adapter->lock); + spin_lock_init(&adapter->tcb_send_qlock); + spin_lock_init(&adapter->tcb_ready_qlock); + spin_lock_init(&adapter->send_hw_lock); + spin_lock_init(&adapter->rcv_lock); + spin_lock_init(&adapter->rcv_pend_lock); + spin_lock_init(&adapter->fbr_lock); + spin_lock_init(&adapter->phy_lock); /* Parse configuration parameters into the private adapter struct */ if (et131x_speed_set) - dev_info(&etdev->pdev->dev, + dev_info(&adapter->pdev->dev, "Speed set manually to : %d\n", et131x_speed_set); - etdev->speed_duplex = et131x_speed_set; - etdev->registry_jumbo_packet = 1514; /* 1514-9216 */ + adapter->speed_duplex = et131x_speed_set; + adapter->registry_jumbo_packet = 1514; /* 1514-9216 */ /* Set the MAC address to a default */ - memcpy(etdev->addr, default_mac, ETH_ALEN); + memcpy(adapter->addr, default_mac, ETH_ALEN); /* Decode speed_duplex * @@ -575,14 +575,14 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev, * If we are the 10/100 device, and gigabit is somehow requested then * knock it down to 100 full. */ - if (etdev->pdev->device == ET131X_PCI_DEVICE_ID_FAST && - etdev->speed_duplex == 5) - etdev->speed_duplex = 4; + if (adapter->pdev->device == ET131X_PCI_DEVICE_ID_FAST && + adapter->speed_duplex == 5) + adapter->speed_duplex = 4; - etdev->ai_force_speed = speed[etdev->speed_duplex]; - etdev->ai_force_duplex = duplex[etdev->speed_duplex]; /* Auto FDX */ + adapter->ai_force_speed = speed[adapter->speed_duplex]; + adapter->ai_force_duplex = duplex[adapter->speed_duplex]; /* Auto FDX */ - return etdev; + return adapter; } /** diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c index 1584ab217616..7cfd213fb136 100644 --- a/drivers/staging/et131x/et131x_isr.c +++ b/drivers/staging/et131x/et131x_isr.c @@ -242,10 +242,10 @@ out: */ void et131x_isr_handler(struct work_struct *work) { - struct et131x_adapter *etdev = + struct et131x_adapter *adapter = container_of(work, struct et131x_adapter, task); - u32 status = etdev->stats.interrupt_status; - struct address_map __iomem *iomem = etdev->regs; + u32 status = adapter->stats.interrupt_status; + struct address_map __iomem *iomem = adapter->regs; /* * These first two are by far the most common. Once handled, we clear @@ -254,11 +254,11 @@ void et131x_isr_handler(struct work_struct *work) */ /* Handle all the completed Transmit interrupts */ if (status & ET_INTR_TXDMA_ISR) - et131x_handle_send_interrupt(etdev); + et131x_handle_send_interrupt(adapter); /* Handle all the completed Receives interrupts */ if (status & ET_INTR_RXDMA_XFR_DONE) - et131x_handle_recv_interrupt(etdev); + et131x_handle_recv_interrupt(adapter); status &= 0xffffffd7; @@ -270,7 +270,7 @@ void et131x_isr_handler(struct work_struct *work) /* Following read also clears the register (COR) */ txdma_err = readl(&iomem->txdma.tx_dma_error); - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "TXDMA_ERR interrupt, error = %d\n", txdma_err); } @@ -295,8 +295,8 @@ void et131x_isr_handler(struct work_struct *work) /* If the user has flow control on, then we will * send a pause packet, otherwise just exit */ - if (etdev->flowcontrol == FLOW_TXONLY || - etdev->flowcontrol == FLOW_BOTH) { + if (adapter->flowcontrol == FLOW_TXONLY || + adapter->flowcontrol == FLOW_BOTH) { u32 pm_csr; /* Tell the device to send a pause packet via @@ -345,7 +345,7 @@ void et131x_isr_handler(struct work_struct *work) */ /* TRAP();*/ - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "RxDMA_ERR interrupt, error %x\n", readl(&iomem->txmac.tx_test)); } @@ -359,7 +359,7 @@ void et131x_isr_handler(struct work_struct *work) * message when we are in DBG mode, otherwise we * will ignore it. */ - dev_err(&etdev->pdev->dev, "WAKE_ON_LAN interrupt\n"); + dev_err(&adapter->pdev->dev, "WAKE_ON_LAN interrupt\n"); } /* Handle the PHY interrupt */ @@ -379,26 +379,26 @@ void et131x_isr_handler(struct work_struct *work) * so, disable it because we will not be able * to read PHY values until we are out. */ - et1310_disable_phy_coma(etdev); + et1310_disable_phy_coma(adapter); } /* Read the PHY ISR to clear the reason for the * interrupt. */ - et131x_mii_read(etdev, + et131x_mii_read(adapter, (uint8_t) offsetof(struct mi_regs, isr), &myisr); - if (!etdev->replica_phy_loopbk) { - et131x_mii_read(etdev, + if (!adapter->replica_phy_loopbk) { + et131x_mii_read(adapter, (uint8_t) offsetof(struct mi_regs, bmsr), &bmsr_data); - bmsr_ints = etdev->bmsr ^ bmsr_data; - etdev->bmsr = bmsr_data; + bmsr_ints = adapter->bmsr ^ bmsr_data; + adapter->bmsr = bmsr_data; /* Do all the cable in / cable out stuff */ - et131x_mii_check(etdev, bmsr_data, bmsr_ints); + et131x_mii_check(adapter, bmsr_data, bmsr_ints); } } @@ -416,7 +416,7 @@ void et131x_isr_handler(struct work_struct *work) * a nutshell, the whole Tx path will have to be reset * and re-configured afterwards. */ - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "TXMAC interrupt, error 0x%08x\n", err); @@ -434,14 +434,14 @@ void et131x_isr_handler(struct work_struct *work) * set the flag to cause us to reset so we can solve * this issue. */ - /* MP_SET_FLAG( etdev, + /* MP_SET_FLAG( adapter, fMP_ADAPTER_HARDWARE_ERROR); */ - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "RXMAC interrupt, error 0x%08x. Requesting reset\n", readl(&iomem->rxmac.err_reg)); - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "Enable 0x%08x, Diag 0x%08x\n", readl(&iomem->rxmac.ctrl), readl(&iomem->rxmac.rxq_diag)); @@ -461,7 +461,7 @@ void et131x_isr_handler(struct work_struct *work) * to maintain the top, software managed bits of the * counter(s). */ - et1310_handle_macstat_interrupt(etdev); + et1310_handle_macstat_interrupt(adapter); } /* Handle SLV Timeout Interrupt */ @@ -477,5 +477,5 @@ void et131x_isr_handler(struct work_struct *work) */ } } - et131x_enable_interrupts(etdev); + et131x_enable_interrupts(adapter); } diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c index 93ef9d5f04fd..37e10696afb8 100644 --- a/drivers/staging/et131x/et131x_netdev.c +++ b/drivers/staging/et131x/et131x_netdev.c @@ -212,19 +212,19 @@ int et131x_close(struct net_device *netdev) int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd) { int status = 0; - struct et131x_adapter *etdev = netdev_priv(netdev); + struct et131x_adapter *adapter = netdev_priv(netdev); struct mii_ioctl_data *data = if_mii(reqbuf); switch (cmd) { case SIOCGMIIPHY: - data->phy_id = etdev->stats.xcvr_addr; + data->phy_id = adapter->stats.xcvr_addr; break; case SIOCGMIIREG: if (!capable(CAP_NET_ADMIN)) status = -EPERM; else - status = et131x_mii_read(etdev, + status = et131x_mii_read(adapter, data->reg_num, &data->val_out); break; @@ -232,7 +232,7 @@ int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd) if (!capable(CAP_NET_ADMIN)) status = -EPERM; else - status = et131x_mii_write(etdev, data->reg_num, + status = et131x_mii_write(adapter, data->reg_num, data->val_in); break; @@ -445,35 +445,35 @@ int et131x_tx(struct sk_buff *skb, struct net_device *netdev) */ void et131x_tx_timeout(struct net_device *netdev) { - struct et131x_adapter *etdev = netdev_priv(netdev); + struct et131x_adapter *adapter = netdev_priv(netdev); struct tcb *tcb; unsigned long flags; /* Any nonrecoverable hardware error? * Checks adapter->flags for any failure in phy reading */ - if (etdev->flags & fMP_ADAPTER_NON_RECOVER_ERROR) + if (adapter->flags & fMP_ADAPTER_NON_RECOVER_ERROR) return; /* Hardware failure? */ - if (etdev->flags & fMP_ADAPTER_HARDWARE_ERROR) { - dev_err(&etdev->pdev->dev, "hardware error - reset\n"); + if (adapter->flags & fMP_ADAPTER_HARDWARE_ERROR) { + dev_err(&adapter->pdev->dev, "hardware error - reset\n"); return; } /* Is send stuck? */ - spin_lock_irqsave(&etdev->tcb_send_qlock, flags); + spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - tcb = etdev->tx_ring.send_head; + tcb = adapter->tx_ring.send_head; if (tcb != NULL) { tcb->count++; if (tcb->count > NIC_SEND_HANG_THRESHOLD) { - spin_unlock_irqrestore(&etdev->tcb_send_qlock, + spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); - dev_warn(&etdev->pdev->dev, + dev_warn(&adapter->pdev->dev, "Send stuck - reset. tcb->WrIndex %x, flags 0x%08x\n", tcb->index, tcb->flags); @@ -485,7 +485,7 @@ void et131x_tx_timeout(struct net_device *netdev) } } - spin_unlock_irqrestore(&etdev->tcb_send_qlock, flags); + spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); } /** -- 2.20.1