From 10d4c6736ea6e6ff293dd588551270bca00ca45d Mon Sep 17 00:00:00 2001 From: Petri Gynther Date: Thu, 8 May 2014 15:50:01 -0700 Subject: [PATCH] Bluetooth: btusb: Add Broadcom patch RAM support After hardware reset, some BCM Bluetooth adapters obtain their initial firmware from OTPROM chip. Once this initial firmware is running, the firmware can be further upgraded over HCI interface with .hcd files provided by Broadcom. This is also known as "patch RAM" support. This change implements that. If the .hcd file is not found in /lib/firmware, BCM Bluetooth adapter continues to operate with the initial firmware. Sample kernel log: hotplug: sys=firmware act=add fw=brcm/BCM20702A0-0a5c-22be.hcd dev=... Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-22be.hcd not found If the .hcd file is found, btusb driver pushes it to the BCM Bluetooth adapter and it starts using the new firmware. Sample kernel log: hotplug: sys=firmware act=add fw=brcm/BCM20702A0-0a5c-22be.hcd dev=... Bluetooth: hci0: BCM: patching hci_ver=06 hci_rev=1000 lmp_ver=06 lmp_subver=220e Bluetooth: hci0: BCM: firmware hci_ver=06 hci_rev=1389 lmp_ver=06 lmp_subver=220e Above, we can see that hci_rev goes from 1000 to 1389 as a result of the upgrade. Signed-off-by: Petri Gynther Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 155 +++++++++++++++++++++++++++++++++++++- 1 file changed, 154 insertions(+), 1 deletion(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f338b0c5a8de..8f579cd9bbaf 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -49,6 +49,7 @@ static struct usb_driver btusb_driver; #define BTUSB_WRONG_SCO_MTU 0x40 #define BTUSB_ATH3012 0x80 #define BTUSB_INTEL 0x100 +#define BTUSB_BCM_PATCHRAM 0x200 static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -111,7 +112,8 @@ static const struct usb_device_id btusb_table[] = { { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01) }, /* Broadcom devices with vendor specific id */ - { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, /* Belkin F8065bf - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) }, @@ -1380,6 +1382,154 @@ exit_mfg_deactivate: return 0; } +static int btusb_setup_bcm_patchram(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct usb_device *udev = data->udev; + char fw_name[64]; + const struct firmware *fw; + const u8 *fw_ptr; + size_t fw_size; + const struct hci_command_hdr *cmd; + const u8 *cmd_param; + u16 opcode; + struct sk_buff *skb; + struct hci_rp_read_local_version *ver; + long ret; + + snprintf(fw_name, sizeof(fw_name), "brcm/%s-%04x-%04x.hcd", + udev->product ? udev->product : "BCM", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + ret = request_firmware(&fw, fw_name, &hdev->dev); + if (ret < 0) { + BT_INFO("%s: BCM: patch %s not found", hdev->name, + fw_name); + return 0; + } + + /* Reset */ + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret); + goto done; + } + kfree_skb(skb); + + /* Read Local Version Info */ + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", + hdev->name, ret); + goto done; + } + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", + hdev->name); + kfree_skb(skb); + ret = -EIO; + goto done; + } + + ver = (struct hci_rp_read_local_version *) skb->data; + BT_INFO("%s: BCM: patching hci_ver=%02x hci_rev=%04x lmp_ver=%02x " + "lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev, + ver->lmp_ver, ver->lmp_subver); + kfree_skb(skb); + + /* Start Download */ + skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: BCM: Download Minidrv command failed (%ld)", + hdev->name, ret); + goto reset_fw; + } + kfree_skb(skb); + + /* 50 msec delay after Download Minidrv completes */ + msleep(50); + + fw_ptr = fw->data; + fw_size = fw->size; + + while (fw_size >= sizeof(*cmd)) { + cmd = (struct hci_command_hdr *) fw_ptr; + fw_ptr += sizeof(*cmd); + fw_size -= sizeof(*cmd); + + if (fw_size < cmd->plen) { + BT_ERR("%s: BCM: patch %s is corrupted", + hdev->name, fw_name); + ret = -EINVAL; + goto reset_fw; + } + + cmd_param = fw_ptr; + fw_ptr += cmd->plen; + fw_size -= cmd->plen; + + opcode = le16_to_cpu(cmd->opcode); + + skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: BCM: patch command %04x failed (%ld)", + hdev->name, opcode, ret); + goto reset_fw; + } + kfree_skb(skb); + } + + /* 250 msec delay after Launch Ram completes */ + msleep(250); + +reset_fw: + /* Reset */ + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret); + goto done; + } + kfree_skb(skb); + + /* Read Local Version Info */ + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", + hdev->name, ret); + goto done; + } + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", + hdev->name); + kfree_skb(skb); + ret = -EIO; + goto done; + } + + ver = (struct hci_rp_read_local_version *) skb->data; + BT_INFO("%s: BCM: firmware hci_ver=%02x hci_rev=%04x lmp_ver=%02x " + "lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev, + ver->lmp_ver, ver->lmp_subver); + kfree_skb(skb); + +done: + release_firmware(fw); + + return ret; +} + static int btusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1485,6 +1635,9 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_BCM92035) hdev->setup = btusb_setup_bcm92035; + if (id->driver_info & BTUSB_BCM_PATCHRAM) + hdev->setup = btusb_setup_bcm_patchram; + if (id->driver_info & BTUSB_INTEL) { usb_enable_autosuspend(data->udev); hdev->setup = btusb_setup_intel; -- 2.20.1