From 1084937123c7ccbaced0b4babd7114398bf444b5 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 29 Jul 2013 20:07:54 +0300 Subject: [PATCH] staging: octeon-usb: cvmx-usb: reformat long comments Reformat long comments according to multi-line comment style. Signed-off-by: Aaro Koskinen Signed-off-by: Greg Kroah-Hartman --- drivers/staging/octeon-usb/cvmx-usb.c | 717 +++++++++++++++++--------- 1 file changed, 462 insertions(+), 255 deletions(-) diff --git a/drivers/staging/octeon-usb/cvmx-usb.c b/drivers/staging/octeon-usb/cvmx-usb.c index e8fad48b1bb5..025671a2d5b1 100644 --- a/drivers/staging/octeon-usb/cvmx-usb.c +++ b/drivers/staging/octeon-usb/cvmx-usb.c @@ -78,9 +78,11 @@ #define MAX_TRANSFER_BYTES ((1<<19)-1) /* The low level hardware can transfer a maximum of this number of bytes in each transfer. The field is 19 bits wide */ #define MAX_TRANSFER_PACKETS ((1<<10)-1) /* The low level hardware can transfer a maximum of this number of packets in each transfer. The field is 10 bits wide */ -/* These defines disable the normal read and write csr. This is so I can add - extra debug stuff to the usb specific version and I won't use the normal - version by mistake */ +/* + * These defines disable the normal read and write csr. This is so I can add + * extra debug stuff to the usb specific version and I won't use the normal + * version by mistake + */ #define cvmx_read_csr use_cvmx_usb_read_csr64_instead_of_cvmx_read_csr #define cvmx_write_csr use_cvmx_usb_write_csr64_instead_of_cvmx_write_csr @@ -227,8 +229,10 @@ typedef struct { } while (0); \ result; }) -/* This macro logically sets a single field in a CSR. It does the sequence - read, modify, and write */ +/* + * This macro logically sets a single field in a CSR. It does the sequence + * read, modify, and write + */ #define USB_SET_FIELD32(address, type, field, value) \ do { \ type c; \ @@ -562,23 +566,30 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, __cvmx_usb_append_pipe(&usb->free_pipes, usb->pipe + i); } - /* Power On Reset and PHY Initialization */ - - /* 1. Wait for DCOK to assert (nothing to do) */ - /* 2a. Write USBN0/1_CLK_CTL[POR] = 1 and - USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0 */ + /* + * Power On Reset and PHY Initialization + * + * 1. Wait for DCOK to assert (nothing to do) + * + * 2a. Write USBN0/1_CLK_CTL[POR] = 1 and + * USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0 + */ usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index)); usbn_clk_ctl.s.por = 1; usbn_clk_ctl.s.hrst = 0; usbn_clk_ctl.s.prst = 0; usbn_clk_ctl.s.hclk_rst = 0; usbn_clk_ctl.s.enable = 0; - /* 2b. Select the USB reference clock/crystal parameters by writing - appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON] */ + /* + * 2b. Select the USB reference clock/crystal parameters by writing + * appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON] + */ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) { - /* The USB port uses 12/24/48MHz 2.5V board clock - source at USB_XO. USB_XI should be tied to GND. - Most Octeon evaluation boards require this setting */ + /* + * The USB port uses 12/24/48MHz 2.5V board clock + * source at USB_XO. USB_XI should be tied to GND. + * Most Octeon evaluation boards require this setting + */ if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) { usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */ usbn_clk_ctl.cn31xx.p_xenbn = 0; @@ -599,8 +610,10 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, break; } } else { - /* The USB port uses a 12MHz crystal as clock source - at USB_XO and USB_XI */ + /* + * The USB port uses a 12MHz crystal as clock source + * at USB_XO and USB_XI + */ if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) { usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */ usbn_clk_ctl.cn31xx.p_xenbn = 1; @@ -611,9 +624,11 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, usbn_clk_ctl.s.p_c_sel = 0; } - /* 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and - setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down such - that USB is as close as possible to 125Mhz */ + /* + * 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and + * setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down + * such that USB is as close as possible to 125Mhz + */ { int divisor = (octeon_get_clock_rate()+125000000-1)/125000000; if (divisor < 4) /* Lower than 4 doesn't seem to work properly */ @@ -629,41 +644,55 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, usbn_clk_ctl.u64); /* 2e. Wait 64 core-clock cycles for HCLK to stabilize */ cvmx_wait(64); - /* 3. Program the power-on reset field in the USBN clock-control register: - USBN_CLK_CTL[POR] = 0 */ + /* + * 3. Program the power-on reset field in the USBN clock-control + * register: + * USBN_CLK_CTL[POR] = 0 + */ usbn_clk_ctl.s.por = 0; __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); /* 4. Wait 1 ms for PHY clock to start */ mdelay(1); - /* 5. Program the Reset input from automatic test equipment field in the - USBP control and status register: USBN_USBP_CTL_STATUS[ATE_RESET] = 1 */ + /* + * 5. Program the Reset input from automatic test equipment field in the + * USBP control and status register: + * USBN_USBP_CTL_STATUS[ATE_RESET] = 1 + */ usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index)); usbn_usbp_ctl_status.s.ate_reset = 1; __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index), usbn_usbp_ctl_status.u64); /* 6. Wait 10 cycles */ cvmx_wait(10); - /* 7. Clear ATE_RESET field in the USBN clock-control register: - USBN_USBP_CTL_STATUS[ATE_RESET] = 0 */ + /* + * 7. Clear ATE_RESET field in the USBN clock-control register: + * USBN_USBP_CTL_STATUS[ATE_RESET] = 0 + */ usbn_usbp_ctl_status.s.ate_reset = 0; __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index), usbn_usbp_ctl_status.u64); - /* 8. Program the PHY reset field in the USBN clock-control register: - USBN_CLK_CTL[PRST] = 1 */ + /* + * 8. Program the PHY reset field in the USBN clock-control register: + * USBN_CLK_CTL[PRST] = 1 + */ usbn_clk_ctl.s.prst = 1; __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); - /* 9. Program the USBP control and status register to select host or - device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for - device */ + /* + * 9. Program the USBP control and status register to select host or + * device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for + * device + */ usbn_usbp_ctl_status.s.hst_mode = 0; __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index), usbn_usbp_ctl_status.u64); /* 10. Wait 1 us */ udelay(1); - /* 11. Program the hreset_n field in the USBN clock-control register: - USBN_CLK_CTL[HRST] = 1 */ + /* + * 11. Program the hreset_n field in the USBN clock-control register: + * USBN_CLK_CTL[HRST] = 1 + */ usbn_clk_ctl.s.hrst = 1; __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); @@ -673,20 +702,24 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, usbn_clk_ctl.u64); udelay(1); - /* USB Core Initialization */ - - /* 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to - determine USB core configuration parameters. */ - /* Nothing needed */ - /* 2. Program the following fields in the global AHB configuration - register (USBC_GAHBCFG) - DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode - Burst length, USBC_GAHBCFG[HBSTLEN] = 0 - Nonperiodic TxFIFO empty level (slave mode only), - USBC_GAHBCFG[NPTXFEMPLVL] - Periodic TxFIFO empty level (slave mode only), - USBC_GAHBCFG[PTXFEMPLVL] - Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1 */ + /* + * USB Core Initialization + * + * 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to + * determine USB core configuration parameters. + * + * Nothing needed + * + * 2. Program the following fields in the global AHB configuration + * register (USBC_GAHBCFG) + * DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode + * Burst length, USBC_GAHBCFG[HBSTLEN] = 0 + * Nonperiodic TxFIFO empty level (slave mode only), + * USBC_GAHBCFG[NPTXFEMPLVL] + * Periodic TxFIFO empty level (slave mode only), + * USBC_GAHBCFG[PTXFEMPLVL] + * Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1 + */ { cvmx_usbcx_gahbcfg_t usbcx_gahbcfg; /* Due to an errata, CN31XX doesn't support DMA */ @@ -707,11 +740,13 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, __cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index), usbcx_gahbcfg.u32); } - /* 3. Program the following fields in USBC_GUSBCFG register. - HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0 - ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0 - USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5 - PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0 */ + /* + * 3. Program the following fields in USBC_GUSBCFG register. + * HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0 + * ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0 + * USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5 + * PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0 + */ { cvmx_usbcx_gusbcfg_t usbcx_gusbcfg; usbcx_gusbcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index)); @@ -722,10 +757,12 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, __cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index), usbcx_gusbcfg.u32); } - /* 4. The software must unmask the following bits in the USBC_GINTMSK - register. - OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1 - Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1 */ + /* + * 4. The software must unmask the following bits in the USBC_GINTMSK + * register. + * OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1 + * Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1 + */ { cvmx_usbcx_gintmsk_t usbcx_gintmsk; int channel; @@ -747,16 +784,20 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, } { - /* Host Port Initialization */ - - /* 1. Program the host-port interrupt-mask field to unmask, - USBC_GINTMSK[PRTINT] = 1 */ + /* + * Host Port Initialization + * + * 1. Program the host-port interrupt-mask field to unmask, + * USBC_GINTMSK[PRTINT] = 1 + */ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, prtintmsk, 1); USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, disconnintmsk, 1); - /* 2. Program the USBC_HCFG register to select full-speed host or - high-speed host. */ + /* + * 2. Program the USBC_HCFG register to select full-speed host + * or high-speed host. + */ { cvmx_usbcx_hcfg_t usbcx_hcfg; usbcx_hcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index)); @@ -764,11 +805,15 @@ int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number, usbcx_hcfg.s.fslspclksel = 0; __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32); } - /* 3. Program the port power bit to drive VBUS on the USB, - USBC_HPRT[PRTPWR] = 1 */ + /* + * 3. Program the port power bit to drive VBUS on the USB, + * USBC_HPRT[PRTPWR] = 1 + */ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtpwr, 1); - /* Steps 4-15 from the manual are done later in the port enable */ + /* + * Steps 4-15 from the manual are done later in the port enable + */ } return 0; @@ -827,8 +872,10 @@ int cvmx_usb_enable(cvmx_usb_state_t *state) usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); - /* If the port is already enabled the just return. We don't need to do - anything */ + /* + * If the port is already enabled the just return. We don't need to do + * anything + */ if (usb->usbcx_hprt.s.prtena) return 0; @@ -840,8 +887,10 @@ int cvmx_usb_enable(cvmx_usb_state_t *state) /* Program the port reset bit to start the reset process */ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 1); - /* Wait at least 50ms (high speed), or 10ms (full speed) for the reset - process to complete. */ + /* + * Wait at least 50ms (high speed), or 10ms (full speed) for the reset + * process to complete. + */ mdelay(50); /* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */ @@ -856,13 +905,17 @@ int cvmx_usb_enable(cvmx_usb_state_t *state) usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); usbcx_ghwcfg3.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GHWCFG3(usb->index)); - /* 13. Program the USBC_GRXFSIZ register to select the size of the receive - FIFO (25%). */ + /* + * 13. Program the USBC_GRXFSIZ register to select the size of the + * receive FIFO (25%). + */ USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), cvmx_usbcx_grxfsiz_t, rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4); - /* 14. Program the USBC_GNPTXFSIZ register to select the size and the - start address of the non- periodic transmit FIFO for nonperiodic - transactions (50%). */ + /* + * 14. Program the USBC_GNPTXFSIZ register to select the size and the + * start address of the non- periodic transmit FIFO for nonperiodic + * transactions (50%). + */ { cvmx_usbcx_gnptxfsiz_t siz; siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index)); @@ -870,8 +923,11 @@ int cvmx_usb_enable(cvmx_usb_state_t *state) siz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4; __cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), siz.u32); } - /* 15. Program the USBC_HPTXFSIZ register to select the size and start - address of the periodic transmit FIFO for periodic transactions (25%). */ + /* + * 15. Program the USBC_HPTXFSIZ register to select the size and start + * address of the periodic transmit FIFO for periodic transactions + * (25%). + */ { cvmx_usbcx_hptxfsiz_t siz; siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index)); @@ -1112,8 +1168,10 @@ int cvmx_usb_open_pipe(cvmx_usb_state_t *state, cvmx_usb_pipe_flags_t flags, pipe->max_packet = max_packet; pipe->transfer_type = transfer_type; pipe->transfer_dir = transfer_dir; - /* All pipes use interval to rate limit NAK processing. Force an interval - if one wasn't supplied */ + /* + * All pipes use interval to rate limit NAK processing. Force an + * interval if one wasn't supplied + */ if (!interval) interval = 1; if (__cvmx_usb_pipe_needs_split(usb, pipe)) { @@ -1131,8 +1189,10 @@ int cvmx_usb_open_pipe(cvmx_usb_state_t *state, cvmx_usb_pipe_flags_t flags, pipe->split_sc_frame = -1; __cvmx_usb_append_pipe(&usb->idle_pipes, pipe); - /* We don't need to tell the hardware about this pipe yet since - it doesn't have any submitted requests */ + /* + * We don't need to tell the hardware about this pipe yet since + * it doesn't have any submitted requests + */ return __cvmx_usb_get_pipe_handle(usb, pipe); } @@ -1198,8 +1258,10 @@ static void __cvmx_usb_poll_rx_fifo(cvmx_usb_internal_state_t *usb) */ static int __cvmx_usb_fill_tx_hw(cvmx_usb_internal_state_t *usb, cvmx_usb_tx_fifo_t *fifo, int available) { - /* We're done either when there isn't anymore space or the software FIFO - is empty */ + /* + * We're done either when there isn't anymore space or the software FIFO + * is empty + */ while (available && (fifo->head != fifo->tail)) { int i = fifo->tail; const uint32_t *ptr = cvmx_phys_to_ptr(fifo->entry[i].address); @@ -1219,8 +1281,10 @@ static int __cvmx_usb_fill_tx_hw(cvmx_usb_internal_state_t *usb, cvmx_usb_tx_fif fifo->entry[i].address += words * 4; fifo->entry[i].size -= words; - /* Write the HW fifo data. The read every three writes is due - to an errata on CN3XXX chips */ + /* + * Write the HW fifo data. The read every three writes is due + * to an errata on CN3XXX chips + */ while (words > 3) { cvmx_write64_uint32(csr_address, *ptr++); cvmx_write64_uint32(csr_address, *ptr++); @@ -1351,8 +1415,10 @@ static void __cvmx_usb_start_channel_control(cvmx_usb_internal_state_t *usb, bytes_to_transfer = sizeof(*header); /* All Control operations start with a setup going OUT */ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT); - /* Setup send the control header instead of the buffer data. The - buffer data will be used in the next stage */ + /* + * Setup send the control header instead of the buffer data. The + * buffer data will be used in the next stage + */ __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, transaction->control_header); break; case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE: @@ -1406,28 +1472,36 @@ static void __cvmx_usb_start_channel_control(cvmx_usb_internal_state_t *usb, break; } - /* Make sure the transfer never exceeds the byte limit of the hardware. - Further bytes will be sent as continued transactions */ + /* + * Make sure the transfer never exceeds the byte limit of the hardware. + * Further bytes will be sent as continued transactions + */ if (bytes_to_transfer > MAX_TRANSFER_BYTES) { /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */ bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet; bytes_to_transfer *= pipe->max_packet; } - /* Calculate the number of packets to transfer. If the length is zero - we still need to transfer one packet */ + /* + * Calculate the number of packets to transfer. If the length is zero + * we still need to transfer one packet + */ packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet; if (packets_to_transfer == 0) packets_to_transfer = 1; else if ((packets_to_transfer > 1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) { - /* Limit to one packet when not using DMA. Channels must be restarted - between every packet for IN transactions, so there is no reason to - do multiple packets in a row */ + /* + * Limit to one packet when not using DMA. Channels must be + * restarted between every packet for IN transactions, so there + * is no reason to do multiple packets in a row + */ packets_to_transfer = 1; bytes_to_transfer = packets_to_transfer * pipe->max_packet; } else if (packets_to_transfer > MAX_TRANSFER_PACKETS) { - /* Limit the number of packet and data transferred to what the - hardware can handle */ + /* + * Limit the number of packet and data transferred to what the + * hardware can handle + */ packets_to_transfer = MAX_TRANSFER_PACKETS; bytes_to_transfer = packets_to_transfer * pipe->max_packet; } @@ -1517,17 +1591,24 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, int packets_to_transfer; int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes; - /* ISOCHRONOUS transactions store each individual transfer size in the - packet structure, not the global buffer_length */ + /* + * ISOCHRONOUS transactions store each individual transfer size + * in the packet structure, not the global buffer_length + */ if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) bytes_to_transfer = transaction->iso_packets[0].length - transaction->actual_bytes; - /* We need to do split transactions when we are talking to non high - speed devices that are behind a high speed hub */ + /* + * We need to do split transactions when we are talking to non + * high speed devices that are behind a high speed hub + */ if (__cvmx_usb_pipe_needs_split(usb, pipe)) { - /* On the start split phase (stage is even) record the frame number we - will need to send the split complete. We only store the lower two bits - since the time ahead can only be two frames */ + /* + * On the start split phase (stage is even) record the + * frame number we will need to send the split complete. + * We only store the lower two bits since the time ahead + * can only be two frames + */ if ((transaction->stage&1) == 0) { if (transaction->type == CVMX_USB_TRANSFER_BULK) pipe->split_sc_frame = (usb->frame_number + 1) & 0x7f; @@ -1541,64 +1622,94 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, usbc_hcsplt.s.prtaddr = pipe->hub_port; usbc_hcsplt.s.compsplt = (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE); - /* SPLIT transactions can only ever transmit one data packet so - limit the transfer size to the max packet size */ + /* + * SPLIT transactions can only ever transmit one data + * packet so limit the transfer size to the max packet + * size + */ if (bytes_to_transfer > pipe->max_packet) bytes_to_transfer = pipe->max_packet; - /* ISOCHRONOUS OUT splits are unique in that they limit - data transfers to 188 byte chunks representing the - begin/middle/end of the data or all */ + /* + * ISOCHRONOUS OUT splits are unique in that they limit + * data transfers to 188 byte chunks representing the + * begin/middle/end of the data or all + */ if (!usbc_hcsplt.s.compsplt && (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) && (pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS)) { - /* Clear the split complete frame number as there isn't going - to be a split complete */ + /* + * Clear the split complete frame number as + * there isn't going to be a split complete + */ pipe->split_sc_frame = -1; - /* See if we've started this transfer and sent data */ + /* + * See if we've started this transfer and sent + * data + */ if (transaction->actual_bytes == 0) { - /* Nothing sent yet, this is either a begin or the - entire payload */ + /* + * Nothing sent yet, this is either a + * begin or the entire payload + */ if (bytes_to_transfer <= 188) usbc_hcsplt.s.xactpos = 3; /* Entire payload in one go */ else usbc_hcsplt.s.xactpos = 2; /* First part of payload */ } else { - /* Continuing the previous data, we must either be - in the middle or at the end */ + /* + * Continuing the previous data, we must + * either be in the middle or at the end + */ if (bytes_to_transfer <= 188) usbc_hcsplt.s.xactpos = 1; /* End of payload */ else usbc_hcsplt.s.xactpos = 0; /* Middle of payload */ } - /* Again, the transfer size is limited to 188 bytes */ + /* + * Again, the transfer size is limited to 188 + * bytes + */ if (bytes_to_transfer > 188) bytes_to_transfer = 188; } } - /* Make sure the transfer never exceeds the byte limit of the hardware. - Further bytes will be sent as continued transactions */ + /* + * Make sure the transfer never exceeds the byte limit of the + * hardware. Further bytes will be sent as continued + * transactions + */ if (bytes_to_transfer > MAX_TRANSFER_BYTES) { - /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */ + /* + * Round MAX_TRANSFER_BYTES to a multiple of out packet + * size + */ bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet; bytes_to_transfer *= pipe->max_packet; } - /* Calculate the number of packets to transfer. If the length is zero - we still need to transfer one packet */ + /* + * Calculate the number of packets to transfer. If the length is + * zero we still need to transfer one packet + */ packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet; if (packets_to_transfer == 0) packets_to_transfer = 1; else if ((packets_to_transfer > 1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) { - /* Limit to one packet when not using DMA. Channels must be restarted - between every packet for IN transactions, so there is no reason to - do multiple packets in a row */ + /* + * Limit to one packet when not using DMA. Channels must + * be restarted between every packet for IN + * transactions, so there is no reason to do multiple + * packets in a row + */ packets_to_transfer = 1; bytes_to_transfer = packets_to_transfer * pipe->max_packet; } else if (packets_to_transfer > MAX_TRANSFER_PACKETS) { - /* Limit the number of packet and data transferred to what the - hardware can handle */ + /* + * Limit the number of packet and data transferred to + * what the hardware can handle + */ packets_to_transfer = MAX_TRANSFER_PACKETS; bytes_to_transfer = packets_to_transfer * pipe->max_packet; } @@ -1608,7 +1719,9 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, /* Update the DATA0/DATA1 toggle */ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe); - /* High speed pipes may need a hardware ping before they start */ + /* + * High speed pipes may need a hardware ping before they start + */ if (pipe->flags & __CVMX_USB_PIPE_FLAGS_NEED_PING) usbc_hctsiz.s.dopng = 1; @@ -1620,13 +1733,18 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, { cvmx_usbcx_hccharx_t usbc_hcchar = {.u32 = 0}; - /* Set the startframe odd/even properly. This is only used for periodic */ + /* + * Set the startframe odd/even properly. This is only used for + * periodic + */ usbc_hcchar.s.oddfrm = usb->frame_number&1; - /* Set the number of back to back packets allowed by this endpoint. - Split transactions interpret "ec" as the number of immediate - retries of failure. These retries happen too quickly, so we - disable these entirely for splits */ + /* + * Set the number of back to back packets allowed by this + * endpoint. Split transactions interpret "ec" as the number of + * immediate retries of failure. These retries happen too + * quickly, so we disable these entirely for splits + */ if (__cvmx_usb_pipe_needs_split(usb, pipe)) usbc_hcchar.s.ec = 1; else if (pipe->multi_count < 1) @@ -1656,8 +1774,10 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, break; case CVMX_USB_TRANSFER_ISOCHRONOUS: if (!__cvmx_usb_pipe_needs_split(usb, pipe)) { - /* ISO transactions require different PIDs depending on direction - and how many packets are needed */ + /* + * ISO transactions require different PIDs depending on + * direction and how many packets are needed + */ if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { if (pipe->multi_count < 2) /* Need DATA0 */ USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 0); @@ -1745,9 +1865,11 @@ static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof) /* Find a pipe needing service */ pipe = NULL; if (is_sof) { - /* Only process periodic pipes on SOF interrupts. This way we are - sure that the periodic data is sent in the beginning of the - frame */ + /* + * Only process periodic pipes on SOF interrupts. This + * way we are sure that the periodic data is sent in the + * beginning of the frame + */ pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_ISOCHRONOUS, usb->frame_number); if (likely(!pipe)) pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_INTERRUPT, usb->frame_number); @@ -1764,8 +1886,10 @@ static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof) } done: - /* Only enable SOF interrupts when we have transactions pending in the - future that might need to be scheduled */ + /* + * Only enable SOF interrupts when we have transactions pending in the + * future that might need to be scheduled + */ need_sof = 0; for (ttype = CVMX_USB_TRANSFER_CONTROL; ttype <= CVMX_USB_TRANSFER_INTERRUPT; ttype++) { pipe = usb->active_pipes[ttype].head; @@ -1850,15 +1974,19 @@ static void __cvmx_usb_perform_complete(cvmx_usb_internal_state_t *usb, if (usb->active_split == transaction) usb->active_split = NULL; - /* Isochronous transactions need extra processing as they might not be done - after a single data transfer */ + /* + * Isochronous transactions need extra processing as they might not be + * done after a single data transfer + */ if (unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) { /* Update the number of bytes transferred in this ISO packet */ transaction->iso_packets[0].length = transaction->actual_bytes; transaction->iso_packets[0].status = complete_code; - /* If there are more ISOs pending and we succeeded, schedule the next - one */ + /* + * If there are more ISOs pending and we succeeded, schedule the + * next one + */ if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) { transaction->actual_bytes = 0; /* No bytes transferred for this packet as of yet */ transaction->iso_number_packets--; /* One less ISO waiting to transfer */ @@ -2296,8 +2424,10 @@ int cvmx_usb_cancel(cvmx_usb_state_t *state, int pipe_handle, int submit_handle) if (unlikely((transaction->flags & __CVMX_USB_TRANSACTION_FLAGS_IN_USE) == 0)) return -EINVAL; - /* If the transaction is the HEAD of the queue and scheduled. We need to - treat it special */ + /* + * If the transaction is the HEAD of the queue and scheduled. We need to + * treat it special + */ if ((pipe->head == transaction) && (pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED)) { cvmx_usbcx_hccharx_t usbc_hcchar; @@ -2468,15 +2598,19 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index)); if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) { - /* There seems to be a bug in CN31XX which can cause interrupt - IN transfers to get stuck until we do a write of HCCHARX - without changing things */ + /* + * There seems to be a bug in CN31XX which can cause + * interrupt IN transfers to get stuck until we do a + * write of HCCHARX without changing things + */ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32); return 0; } - /* In non DMA mode the channels don't halt themselves. We need to - manually disable channels that are left running */ + /* + * In non DMA mode the channels don't halt themselves. We need + * to manually disable channels that are left running + */ if (!usbc_hcint.s.chhltd) { if (usbc_hcchar.s.chena) { cvmx_usbcx_hcintmskx_t hcintmsk; @@ -2495,8 +2629,10 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) } } } else { - /* There is are no interrupts that we need to process when the channel is - still running */ + /* + * There is are no interrupts that we need to process when the + * channel is still running + */ if (!usbc_hcint.s.chhltd) return 0; } @@ -2514,33 +2650,45 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) transaction = pipe->head; CVMX_PREFETCH0(transaction); - /* Disconnect this pipe from the HW channel. Later the schedule function will - figure out which pipe needs to go */ + /* + * Disconnect this pipe from the HW channel. Later the schedule + * function will figure out which pipe needs to go + */ usb->pipe_for_channel[channel] = NULL; pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED; - /* Read the channel config info so we can figure out how much data - transfered */ + /* + * Read the channel config info so we can figure out how much data + * transfered + */ usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index)); usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index)); - /* Calculating the number of bytes successfully transferred is dependent on - the transfer direction */ + /* + * Calculating the number of bytes successfully transferred is dependent + * on the transfer direction + */ packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt; if (usbc_hcchar.s.epdir) { - /* IN transactions are easy. For every byte received the hardware - decrements xfersize. All we need to do is subtract the current - value of xfersize from its starting value and we know how many - bytes were written to the buffer */ + /* + * IN transactions are easy. For every byte received the + * hardware decrements xfersize. All we need to do is subtract + * the current value of xfersize from its starting value and we + * know how many bytes were written to the buffer + */ bytes_this_transfer = transaction->xfersize - usbc_hctsiz.s.xfersize; } else { - /* OUT transaction don't decrement xfersize. Instead pktcnt is - decremented on every successful packet send. The hardware does - this when it receives an ACK, or NYET. If it doesn't - receive one of these responses pktcnt doesn't change */ + /* + * OUT transaction don't decrement xfersize. Instead pktcnt is + * decremented on every successful packet send. The hardware + * does this when it receives an ACK, or NYET. If it doesn't + * receive one of these responses pktcnt doesn't change + */ bytes_this_transfer = packets_processed * usbc_hcchar.s.mps; - /* The last packet may not be a full transfer if we didn't have - enough data */ + /* + * The last packet may not be a full transfer if we didn't have + * enough data + */ if (bytes_this_transfer > transaction->xfersize) bytes_this_transfer = transaction->xfersize; } @@ -2550,56 +2698,77 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) else bytes_in_last_packet = bytes_this_transfer; - /* As a special case, setup transactions output the setup header, not - the user's data. For this reason we don't count setup data as bytes - transferred */ + /* + * As a special case, setup transactions output the setup header, not + * the user's data. For this reason we don't count setup data as bytes + * transferred + */ if ((transaction->stage == CVMX_USB_STAGE_SETUP) || (transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE)) bytes_this_transfer = 0; - /* Add the bytes transferred to the running total. It is important that - bytes_this_transfer doesn't count any data that needs to be - retransmitted */ + /* + * Add the bytes transferred to the running total. It is important that + * bytes_this_transfer doesn't count any data that needs to be + * retransmitted + */ transaction->actual_bytes += bytes_this_transfer; if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) buffer_space_left = transaction->iso_packets[0].length - transaction->actual_bytes; else buffer_space_left = transaction->buffer_length - transaction->actual_bytes; - /* We need to remember the PID toggle state for the next transaction. The - hardware already updated it for the next transaction */ + /* + * We need to remember the PID toggle state for the next transaction. + * The hardware already updated it for the next transaction + */ pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0); - /* For high speed bulk out, assume the next transaction will need to do a - ping before proceeding. If this isn't true the ACK processing below - will clear this flag */ + /* + * For high speed bulk out, assume the next transaction will need to do + * a ping before proceeding. If this isn't true the ACK processing below + * will clear this flag + */ if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) && (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) && (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT)) pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING; if (usbc_hcint.s.stall) { - /* STALL as a response means this transaction cannot be completed - because the device can't process transactions. Tell the user. Any - data that was transferred will be counted on the actual bytes - transferred */ + /* + * STALL as a response means this transaction cannot be + * completed because the device can't process transactions. Tell + * the user. Any data that was transferred will be counted on + * the actual bytes transferred + */ pipe->pid_toggle = 0; __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_STALL); } else if (usbc_hcint.s.xacterr) { - /* We know at least one packet worked if we get a ACK or NAK. Reset the retry counter */ + /* + * We know at least one packet worked if we get a ACK or NAK. + * Reset the retry counter + */ if (usbc_hcint.s.nak || usbc_hcint.s.ack) transaction->retries = 0; transaction->retries++; if (transaction->retries > MAX_RETRIES) { - /* XactErr as a response means the device signaled something wrong with - the transfer. For example, PID toggle errors cause these */ + /* + * XactErr as a response means the device signaled + * something wrong with the transfer. For example, PID + * toggle errors cause these + */ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_XACTERR); } else { - /* If this was a split then clear our split in progress marker */ + /* + * If this was a split then clear our split in progress + * marker + */ if (usb->active_split == transaction) usb->active_split = NULL; - /* Rewind to the beginning of the transaction by anding off the - split complete bit */ + /* + * Rewind to the beginning of the transaction by anding + * off the split complete bit + */ transaction->stage &= ~1; pipe->split_sc_frame = -1; pipe->next_tx_frame += pipe->interval; @@ -2614,38 +2783,49 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) /* We'll retry the exact same transaction again */ transaction->retries++; } else if (usbc_hcint.s.nyet) { - /* NYET as a response is only allowed in three cases: as a response to - a ping, as a response to a split transaction, and as a response to - a bulk out. The ping case is handled by hardware, so we only have - splits and bulk out */ + /* + * NYET as a response is only allowed in three cases: as a + * response to a ping, as a response to a split transaction, and + * as a response to a bulk out. The ping case is handled by + * hardware, so we only have splits and bulk out + */ if (!__cvmx_usb_pipe_needs_split(usb, pipe)) { transaction->retries = 0; - /* If there is more data to go then we need to try again. Otherwise - this transaction is complete */ + /* + * If there is more data to go then we need to try + * again. Otherwise this transaction is complete + */ if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); } else { - /* Split transactions retry the split complete 4 times then rewind - to the start split and do the entire transactions again */ + /* + * Split transactions retry the split complete 4 times + * then rewind to the start split and do the entire + * transactions again + */ transaction->retries++; if ((transaction->retries & 0x3) == 0) { - /* Rewind to the beginning of the transaction by anding off the - split complete bit */ + /* + * Rewind to the beginning of the transaction by + * anding off the split complete bit + */ transaction->stage &= ~1; pipe->split_sc_frame = -1; } } } else if (usbc_hcint.s.ack) { transaction->retries = 0; - /* The ACK bit can only be checked after the other error bits. This is - because a multi packet transfer may succeed in a number of packets - and then get a different response on the last packet. In this case - both ACK and the last response bit will be set. If none of the - other response bits is set, then the last packet must have been an - ACK */ - - /* Since we got an ACK, we know we don't need to do a ping on this - pipe */ + /* + * The ACK bit can only be checked after the other error bits. + * This is because a multi packet transfer may succeed in a + * number of packets and then get a different response on the + * last packet. In this case both ACK and the last response bit + * will be set. If none of the other response bits is set, then + * the last packet must have been an ACK + * + * Since we got an ACK, we know we don't need to do a ping on + * this pipe + */ pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_NEED_PING; switch (transaction->type) { @@ -2680,9 +2860,12 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) case CVMX_USB_STAGE_DATA: if (__cvmx_usb_pipe_needs_split(usb, pipe)) { transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE; - /* For setup OUT data that are splits, the hardware - doesn't appear to count transferred data. Here - we manually update the data transferred */ + /* + * For setup OUT data that are splits, + * the hardware doesn't appear to count + * transferred data. Here we manually + * update the data transferred + */ if (!usbc_hcchar.s.epdir) { if (buffer_space_left < pipe->max_packet) transaction->actual_bytes += buffer_space_left; @@ -2715,10 +2898,12 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) break; case CVMX_USB_TRANSFER_BULK: case CVMX_USB_TRANSFER_INTERRUPT: - /* The only time a bulk transfer isn't complete when - it finishes with an ACK is during a split transaction. For - splits we need to continue the transfer if more data is - needed */ + /* + * The only time a bulk transfer isn't complete when it + * finishes with an ACK is during a split transaction. + * For splits we need to continue the transfer if more + * data is needed + */ if (__cvmx_usb_pipe_needs_split(usb, pipe)) { if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL) transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; @@ -2746,23 +2931,33 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) break; case CVMX_USB_TRANSFER_ISOCHRONOUS: if (__cvmx_usb_pipe_needs_split(usb, pipe)) { - /* ISOCHRONOUS OUT splits don't require a complete split stage. - Instead they use a sequence of begin OUT splits to transfer - the data 188 bytes at a time. Once the transfer is complete, - the pipe sleeps until the next schedule interval */ + /* + * ISOCHRONOUS OUT splits don't require a + * complete split stage. Instead they use a + * sequence of begin OUT splits to transfer the + * data 188 bytes at a time. Once the transfer + * is complete, the pipe sleeps until the next + * schedule interval + */ if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { - /* If no space left or this wasn't a max size packet then - this transfer is complete. Otherwise start it again - to send the next 188 bytes */ + /* + * If no space left or this wasn't a max + * size packet then this transfer is + * complete. Otherwise start it again to + * send the next 188 bytes + */ if (!buffer_space_left || (bytes_this_transfer < 188)) { pipe->next_tx_frame += pipe->interval; __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); } } else { if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) { - /* We are in the incoming data phase. Keep getting - data until we run out of space or get a small - packet */ + /* + * We are in the incoming data + * phase. Keep getting data + * until we run out of space or + * get a small packet + */ if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { pipe->next_tx_frame += pipe->interval; __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); @@ -2780,10 +2975,12 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) /* If this was a split then clear our split in progress marker */ if (usb->active_split == transaction) usb->active_split = NULL; - /* NAK as a response means the device couldn't accept the transaction, - but it should be retried in the future. Rewind to the beginning of - the transaction by anding off the split complete bit. Retry in the - next interval */ + /* + * NAK as a response means the device couldn't accept the + * transaction, but it should be retried in the future. Rewind + * to the beginning of the transaction by anding off the split + * complete bit. Retry in the next interval + */ transaction->retries = 0; transaction->stage &= ~1; pipe->next_tx_frame += pipe->interval; @@ -2797,8 +2994,10 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) /* We'll retry the exact same transaction again */ transaction->retries++; } else { - /* We get channel halted interrupts with no result bits sets when the - cable is unplugged */ + /* + * We get channel halted interrupts with no result bits + * sets when the cable is unplugged + */ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR); } } @@ -2843,10 +3042,13 @@ int cvmx_usb_poll(cvmx_usb_state_t *state) __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), usbc_gintsts.u32); if (usbc_gintsts.s.rxflvl) { - /* RxFIFO Non-Empty (RxFLvl) - Indicates that there is at least one packet pending to be read - from the RxFIFO. */ - /* In DMA mode this is handled by hardware */ + /* + * RxFIFO Non-Empty (RxFLvl) + * Indicates that there is at least one packet pending to be + * read from the RxFIFO. + * + * In DMA mode this is handled by hardware + */ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) __cvmx_usb_poll_rx_fifo(usb); } @@ -2857,18 +3059,20 @@ int cvmx_usb_poll(cvmx_usb_state_t *state) } if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) { cvmx_usbcx_hprt_t usbc_hprt; - /* Disconnect Detected Interrupt (DisconnInt) - Asserted when a device disconnect is detected. */ - - /* Host Port Interrupt (PrtInt) - The core sets this bit to indicate a change in port status of one - of the O2P USB core ports in Host mode. The application must - read the Host Port Control and Status (HPRT) register to - determine the exact event that caused this interrupt. The - application must clear the appropriate status bit in the Host Port - Control and Status register to clear this bit. */ - - /* Call the user's port callback */ + /* + * Disconnect Detected Interrupt (DisconnInt) + * Asserted when a device disconnect is detected. + * + * Host Port Interrupt (PrtInt) + * The core sets this bit to indicate a change in port status of + * one of the O2P USB core ports in Host mode. The application + * must read the Host Port Control and Status (HPRT) register to + * determine the exact event that caused this interrupt. The + * application must clear the appropriate status bit in the Host + * Port Control and Status register to clear this bit. + * + * Call the user's port callback + */ __cvmx_usb_perform_callback(usb, NULL, NULL, CVMX_USB_CALLBACK_PORT_CHANGED, CVMX_USB_COMPLETE_SUCCESS); @@ -2878,15 +3082,18 @@ int cvmx_usb_poll(cvmx_usb_state_t *state) __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), usbc_hprt.u32); } if (usbc_gintsts.s.hchint) { - /* Host Channels Interrupt (HChInt) - The core sets this bit to indicate that an interrupt is pending on - one of the channels of the core (in Host mode). The application - must read the Host All Channels Interrupt (HAINT) register to - determine the exact number of the channel on which the - interrupt occurred, and then read the corresponding Host - Channel-n Interrupt (HCINTn) register to determine the exact - cause of the interrupt. The application must clear the - appropriate status bit in the HCINTn register to clear this bit. */ + /* + * Host Channels Interrupt (HChInt) + * The core sets this bit to indicate that an interrupt is + * pending on one of the channels of the core (in Host mode). + * The application must read the Host All Channels Interrupt + * (HAINT) register to determine the exact number of the channel + * on which the interrupt occurred, and then read the + * corresponding Host Channel-n Interrupt (HCINTn) register to + * determine the exact cause of the interrupt. The application + * must clear the appropriate status bit in the HCINTn register + * to clear this bit. + */ cvmx_usbcx_haint_t usbc_haint; usbc_haint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINT(usb->index)); while (usbc_haint.u32) { -- 2.20.1