From 0f18d2765ab1ab9530e1b80dc1bc247c8b13cef7 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Tue, 11 Apr 2017 13:11:25 -0400 Subject: [PATCH] drm/nouveau: Enable stereoscopic 3D output over HDMI Enable stereoscopic output for HDMI and DisplayPort connectors on NV50+ (G80+) hardware. We do not enable stereoscopy on older hardware in case there is some older board that still has HDMI output but for which we have no logic for setting the Vendor InfoFrame. With this, I get an obvious 3D output when using the "testdisplay" program from intel-gpu-tools with the "-3" parameter and outputting to a 3D-capable HDMI display, for all available 3D modes (be they TB, SBSH, or FP) on all four G80+ DISPs. Signed-off-by: Alastair Bridgewater --- drivers/gpu/drm/nouveau/nouveau_connector.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 9a91e79158be..147b22163f9f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1324,6 +1324,13 @@ nouveau_connector_create(struct drm_device *dev, int index) break; } + /* HDMI 3D support */ + if ((disp->disp.oclass >= G82_DISP) + && ((type == DRM_MODE_CONNECTOR_DisplayPort) + || (type == DRM_MODE_CONNECTOR_eDP) + || (type == DRM_MODE_CONNECTOR_HDMIA))) + connector->stereo_allowed = true; + /* defaults, will get overridden in detect() */ connector->interlace_allowed = false; connector->doublescan_allowed = false; -- 2.20.1