From 0dcbea196b4e62c3c81a3ba823c3e071b6835d01 Mon Sep 17 00:00:00 2001 From: Hari Prasath Gujulan Elango Date: Wed, 3 Jun 2015 09:08:16 +0000 Subject: [PATCH] staging: wilc1000: remove commented code Remove commented code from this file. Signed-off-by: Hari Prasath Gujulan Elango Signed-off-by: Greg Kroah-Hartman --- .../staging/wilc1000/wilc_wfi_cfgoperations.c | 117 ------------------ 1 file changed, 117 deletions(-) diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c index 7807e23ba9a4..0db7f3dfc352 100644 --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c @@ -606,9 +606,6 @@ static void CfgConnectResult(tenuConnDisconnEvent enuConnDisconnEvent, pstrConnectInfo->au8bssid[1], pstrConnectInfo->au8bssid[2], pstrConnectInfo->au8bssid[3], pstrConnectInfo->au8bssid[4], pstrConnectInfo->au8bssid[5]); WILC_memcpy(priv->au8AssociatedBss, pstrConnectInfo->au8bssid, ETH_ALEN); - /* set bssid in frame filter */ - /* linux_wlan_set_bssid(dev,pstrConnectInfo->au8bssid); */ - /* BugID_4209: if this network has expired in the scan results in the above nl80211 layer, refresh them here by calling * cfg80211_inform_bss() with the last Scan results before calling cfg80211_connect_result() to avoid * Linux kernel warning generated at the nl80211 layer */ @@ -628,7 +625,6 @@ static void CfgConnectResult(tenuConnDisconnEvent enuConnDisconnEvent, } if (bNeedScanRefresh == WILC_TRUE) { - /* RefreshScanResult(priv); */ /*BugID_5418*/ /*Also, refrsh DIRECT- results if */ refresh_scan(priv, 1, WILC_TRUE); @@ -747,19 +743,6 @@ static int WILC_WFI_CfgScan(struct wiphy *wiphy, struct cfg80211_scan_request *r priv = wiphy_priv(wiphy); - /*if(connecting) - * return -EBUSY; */ - - /*BugID_4800: if in AP mode, return.*/ - /*This check is to handle the situation when user*/ - /*requests "create group" during a running scan*/ - /* host_int_set_wfi_drv_handler(priv->hWILCWFIDrv); */ -#if 0 - if (priv->dev->ieee80211_ptr->iftype == NL80211_IFTYPE_AP) { - PRINT_D(GENERIC_DBG, "Required scan while in AP mode"); - return s32Error; - } -#endif /* end of if 0 */ priv->pstrScanReq = request; priv->u32RcvdChCount = 0; @@ -844,7 +827,6 @@ static int WILC_WFI_CfgConnect(struct wiphy *wiphy, struct net_device *dev, { WILC_Sint32 s32Error = WILC_SUCCESS; WILC_Uint32 i; - /* SECURITY_T tenuSecurity_t = NO_SECURITY; */ u8 u8security = NO_ENCRYPT; AUTHTYPE_T tenuAuth_type = ANY; WILC_Char *pcgroup_encrypt_val; @@ -862,7 +844,6 @@ static int WILC_WFI_CfgConnect(struct wiphy *wiphy, struct net_device *dev, host_int_set_wfi_drv_handler((WILC_Uint32)priv->hWILCWFIDrv); - /* host_int_set_wfi_drv_handler((WILC_Uint32)priv->hWILCWFIDrv); */ PRINT_D(CFG80211_DBG, "Connecting to SSID [%s] on netdev [%p] host if [%x]\n", sme->ssid, dev, (WILC_Uint32)priv->hWILCWFIDrv); #ifdef WILC_P2P if (!(WILC_strncmp(sme->ssid, "DIRECT-", 7))) { @@ -935,9 +916,7 @@ static int WILC_WFI_CfgConnect(struct wiphy *wiphy, struct net_device *dev, * we will add to it the pairwise cipher suite(s) */ pcwpa_version = "Default"; PRINT_D(CORECONFIG_DBG, ">> sme->crypto.wpa_versions: %x\n", sme->crypto.wpa_versions); - /* case NL80211_WPA_VERSION_1: */ if (sme->crypto.cipher_group == WLAN_CIPHER_SUITE_WEP40) { - /* tenuSecurity_t = WEP_40; */ u8security = ENCRYPT_ENABLED | WEP; pcgroup_encrypt_val = "WEP40"; pccipher_group = "WLAN_CIPHER_SUITE_WEP40"; @@ -961,7 +940,6 @@ static int WILC_WFI_CfgConnect(struct wiphy *wiphy, struct net_device *dev, host_int_set_WEPDefaultKeyID(priv->hWILCWFIDrv, sme->key_idx); host_int_add_wep_key_bss_sta(priv->hWILCWFIDrv, sme->key, sme->key_len, sme->key_idx); } else if (sme->crypto.cipher_group == WLAN_CIPHER_SUITE_WEP104) { - /* tenuSecurity_t = WEP_104; */ u8security = ENCRYPT_ENABLED | WEP | WEP_EXTENDED; pcgroup_encrypt_val = "WEP104"; pccipher_group = "WLAN_CIPHER_SUITE_WEP104"; @@ -980,9 +958,7 @@ static int WILC_WFI_CfgConnect(struct wiphy *wiphy, struct net_device *dev, host_int_set_WEPDefaultKeyID(priv->hWILCWFIDrv, sme->key_idx); host_int_add_wep_key_bss_sta(priv->hWILCWFIDrv, sme->key, sme->key_len, sme->key_idx); } else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_2) { - /* case NL80211_WPA_VERSION_2: */ if (sme->crypto.cipher_group == WLAN_CIPHER_SUITE_TKIP) { - /* tenuSecurity_t = WPA2_TKIP; */ u8security = ENCRYPT_ENABLED | WPA2 | TKIP; pcgroup_encrypt_val = "WPA2_TKIP"; pccipher_group = "TKIP"; @@ -995,7 +971,6 @@ static int WILC_WFI_CfgConnect(struct wiphy *wiphy, struct net_device *dev, pcwpa_version = "WPA_VERSION_2"; } else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_1) { if (sme->crypto.cipher_group == WLAN_CIPHER_SUITE_TKIP) { - /* tenuSecurity_t = WPA_TKIP; */ u8security = ENCRYPT_ENABLED | WPA | TKIP; pcgroup_encrypt_val = "WPA_TKIP"; pccipher_group = "TKIP"; @@ -1008,7 +983,6 @@ static int WILC_WFI_CfgConnect(struct wiphy *wiphy, struct net_device *dev, } pcwpa_version = "WPA_VERSION_1"; - /* break; */ } else { s32Error = -ENOTSUPP; PRINT_ER("Not supported cipher: Error(%d)\n", s32Error); @@ -1379,7 +1353,6 @@ static int WILC_WFI_add_key(struct wiphy *wiphy, struct net_device *netdev, u8 k host_int_add_rx_gtk(priv->hWILCWFIDrv, params->key, KeyLen, key_index, params->seq_len, params->seq, pu8RxMic, pu8TxMic, STATION_MODE, u8mode); - /* host_int_add_tx_gtk(priv->hWILCWFIDrv,params->key_len,params->key,key_index); */ } else { if (params->key_len > 16 && params->cipher == WLAN_CIPHER_SUITE_TKIP) { /* swap the tx mic by rx mic */ @@ -1851,7 +1824,6 @@ static int WILC_WFI_set_wiphy_params(struct wiphy *wiphy, u32 changed) struct WILC_WFI_priv *priv; priv = wiphy_priv(wiphy); -/* priv = netdev_priv(priv->wdev->netdev); */ pstrCfgParamVal.u32SetCfgFlag = 0; PRINT_D(CFG80211_DBG, "Setting Wiphy params \n"); @@ -1907,22 +1879,8 @@ static int WILC_WFI_set_bitrate_mask(struct wiphy *wiphy, const struct cfg80211_bitrate_mask *mask) { WILC_Sint32 s32Error = WILC_SUCCESS; - /* strCfgParamVal pstrCfgParamVal; */ - /* struct WILC_WFI_priv* priv; */ PRINT_D(CFG80211_DBG, "Setting Bitrate mask function\n"); -#if 0 - priv = wiphy_priv(wiphy); - /* priv = netdev_priv(priv->wdev->netdev); */ - - pstrCfgParamVal.curr_tx_rate = mask->control[IEEE80211_BAND_2GHZ].legacy; - - PRINT_D(CFG80211_DBG, "Tx rate = %d\n", pstrCfgParamVal.curr_tx_rate); - s32Error = hif_set_cfg(priv->hWILCWFIDrv, &pstrCfgParamVal); - - if (s32Error) - PRINT_ER("Error in setting bitrate\n"); -#endif return s32Error; } @@ -1997,7 +1955,6 @@ static int WILC_WFI_del_pmksa(struct wiphy *wiphy, struct net_device *netdev, WILC_Sint32 s32Error = WILC_SUCCESS; struct WILC_WFI_priv *priv = wiphy_priv(wiphy); - /* priv = netdev_priv(priv->wdev->netdev); */ PRINT_D(CFG80211_DBG, "Deleting PMKSA keys\n"); @@ -2041,7 +1998,6 @@ static int WILC_WFI_del_pmksa(struct wiphy *wiphy, struct net_device *netdev, static int WILC_WFI_flush_pmksa(struct wiphy *wiphy, struct net_device *netdev) { struct WILC_WFI_priv *priv = wiphy_priv(wiphy); - /* priv = netdev_priv(priv->wdev->netdev); */ PRINT_D(CFG80211_DBG, "Flushing PMKID key values\n"); @@ -2827,26 +2783,11 @@ static int WILC_WFI_dump_station(struct wiphy *wiphy, struct net_device *dev, return -ENOENT; priv = wiphy_priv(wiphy); - /* priv = netdev_priv(priv->wdev->netdev); */ sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); host_int_get_rssi(priv->hWILCWFIDrv, &(sinfo->signal)); -#if 0 - sinfo->filled |= STATION_INFO_TX_BYTES | - STATION_INFO_TX_PACKETS | - STATION_INFO_RX_BYTES | - STATION_INFO_RX_PACKETS | STATION_INFO_SIGNAL | STATION_INFO_INACTIVE_TIME; - - down(&SemHandleUpdateStats); - sinfo->inactive_time = priv->netstats.rx_time > priv->netstats.tx_time ? jiffies_to_msecs(jiffies - priv->netstats.tx_time) : jiffies_to_msecs(jiffies - priv->netstats.rx_time); - sinfo->rx_bytes = priv->netstats.rx_bytes; - sinfo->tx_bytes = priv->netstats.tx_bytes; - sinfo->rx_packets = priv->netstats.rx_packets; - sinfo->tx_packets = priv->netstats.tx_packets; - up(&SemHandleUpdateStats); -#endif return 0; } @@ -2902,7 +2843,6 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev { WILC_Sint32 s32Error = WILC_SUCCESS; struct WILC_WFI_priv *priv; - /* struct WILC_WFI_mon_priv* mon_priv; */ perInterface_wlan_t *nic; u8 interface_type; WILC_Uint16 TID = 0; @@ -2935,7 +2875,6 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev case NL80211_IFTYPE_STATION: connecting = 0; PRINT_D(HOSTAPD_DBG, "Interface type = NL80211_IFTYPE_STATION\n"); - /* linux_wlan_set_bssid(dev,g_linux_wlan->strInterfaceInfo[0].aSrcAddress); */ /* send delba over wlan interface */ @@ -3033,7 +2972,6 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev host_int_set_power_mgmt(priv->hWILCWFIDrv, 0, 0); connecting = 0; PRINT_D(HOSTAPD_DBG, "Interface type = NL80211_IFTYPE_P2P_CLIENT\n"); - /* linux_wlan_set_bssid(dev,g_linux_wlan->strInterfaceInfo[0].aSrcAddress); */ host_int_del_All_Rx_BASession(priv->hWILCWFIDrv, g_linux_wlan->strInterfaceInfo[0].aBSSID, TID); @@ -3119,12 +3057,8 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev break; case NL80211_IFTYPE_AP: - /* connecting = 1; */ bEnablePS = WILC_FALSE; PRINT_D(HOSTAPD_DBG, "Interface type = NL80211_IFTYPE_AP %d\n", type); - /* linux_wlan_set_bssid(dev,g_linux_wlan->strInterfaceInfo[0].aSrcAddress); */ - /* mon_priv = netdev_priv(dev); */ - /* mon_priv->real_ndev = dev; */ dev->ieee80211_ptr->iftype = type; priv->wdev->iftype = type; nic->iftype = AP_MODE; @@ -3141,11 +3075,6 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev mac_close(dev); mac_open(dev); - /* wilc1000_wlan_deinit(g_linux_wlan); */ - /* wilc1000_wlan_init(dev,nic); */ - /* repeat_power_cycle(nic); */ - /* nic->iftype = STATION_MODE; */ - /*BugID_4847: registered frames in firmware are now lost * due to mac close. So re-register those frames */ for (i = 0; i < num_reg_frame; i++) { @@ -3176,14 +3105,10 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev host_int_del_All_Rx_BASession(priv->hWILCWFIDrv, g_linux_wlan->strInterfaceInfo[0].aBSSID, TID); bEnablePS = WILC_FALSE; PRINT_D(HOSTAPD_DBG, "Interface type = NL80211_IFTYPE_GO\n"); - /* linux_wlan_set_bssid(dev,g_linux_wlan->strInterfaceInfo[0].aSrcAddress); */ - /* mon_priv = netdev_priv(dev); */ - /* mon_priv->real_ndev = dev; */ dev->ieee80211_ptr->iftype = type; priv->wdev->iftype = type; PRINT_D(CORECONFIG_DBG, "(WILC_Uint32)priv->hWILCWFIDrv[%x]\n", (WILC_Uint32)priv->hWILCWFIDrv); - /* host_int_set_operation_mode((WILC_Uint32)priv->hWILCWFIDrv,AP_MODE); */ #ifndef SIMULATION #ifdef WILC_P2P @@ -3195,14 +3120,7 @@ static int WILC_WFI_change_virt_intf(struct wiphy *wiphy, struct net_device *dev /* ensure that the message Q is empty */ host_int_wait_msg_queue_idle(); - - /*while(!g_hif_thread_idle) - * { - * PRINT_D(GENERIC_DBG, "Wait for host IF idle\n"); - * WILC_Sleep(10); - * }*/ wilc1000_wlan_deinit(g_linux_wlan); - /* repeat_power_cycle_partially(g_linux_wlan); */ wilc1000_wlan_init(dev, nic); g_wilc_initialized = 1; @@ -3523,8 +3441,6 @@ static int WILC_WFI_del_station(struct wiphy *wiphy, struct net_device *dev, struct WILC_WFI_priv *priv; perInterface_wlan_t *nic; WILC_NULLCHECK(s32Error, wiphy); - /*BugID_4795: mac may be null pointer to indicate deleting all stations, so avoid null check*/ - /* WILC_NULLCHECK(s32Error, mac); */ priv = wiphy_priv(wiphy); nic = netdev_priv(dev); @@ -3649,7 +3565,6 @@ struct wireless_dev *WILC_WFI_add_virt_intf(struct wiphy *wiphy, const char *nam { perInterface_wlan_t *nic; struct WILC_WFI_priv *priv; - /* struct WILC_WFI_mon_priv* mon_priv; */ struct net_device *new_ifc = NULL; priv = wiphy_priv(wiphy); @@ -3707,7 +3622,6 @@ static struct cfg80211_ops WILC_WFI_cfg80211_ops = { .del_key = WILC_WFI_del_key, .get_key = WILC_WFI_get_key, .set_default_key = WILC_WFI_set_default_key, - /* .dump_survey = WILC_WFI_dump_survey, */ #ifdef WILC_AP_EXTERNAL_MLME .add_virtual_intf = WILC_WFI_add_virt_intf, .del_virtual_intf = WILC_WFI_del_virt_intf, @@ -3725,13 +3639,8 @@ static struct cfg80211_ops WILC_WFI_cfg80211_ops = { #endif .dump_station = WILC_WFI_dump_station, .change_bss = WILC_WFI_change_bss, - /* .auth = WILC_WFI_auth, */ - /* .assoc = WILC_WFI_assoc, */ - /* .deauth = WILC_WFI_deauth, */ - /* .disassoc = WILC_WFI_disassoc, */ .set_wiphy_params = WILC_WFI_set_wiphy_params, - /* .set_bitrate_mask = WILC_WFI_set_bitrate_mask, */ .set_pmksa = WILC_WFI_set_pmksa, .del_pmksa = WILC_WFI_del_pmksa, .flush_pmksa = WILC_WFI_flush_pmksa, @@ -3741,7 +3650,6 @@ static struct cfg80211_ops WILC_WFI_cfg80211_ops = { .mgmt_tx_cancel_wait = WILC_WFI_mgmt_tx_cancel_wait, .mgmt_tx = WILC_WFI_mgmt_tx, .mgmt_frame_register = WILC_WFI_frame_register, - /* .mgmt_tx_cancel_wait = WILC_WFI_mgmt_tx_cancel_wait, */ .set_power_mgmt = WILC_WFI_set_power_mgmt, .set_cqm_rssi_config = WILC_WFI_set_cqm_rssi_config, #endif @@ -3767,13 +3675,11 @@ int WILC_WFI_update_stats(struct wiphy *wiphy, u32 pktlen, u8 changed) struct WILC_WFI_priv *priv; priv = wiphy_priv(wiphy); - /* down(&SemHandleUpdateStats); */ #if 1 switch (changed) { case WILC_WFI_RX_PKT: { - /* MI_PRINTF("In Rx Receive Packet\n"); */ priv->netstats.rx_packets++; priv->netstats.rx_bytes += pktlen; priv->netstats.rx_time = get_jiffies_64(); @@ -3792,7 +3698,6 @@ int WILC_WFI_update_stats(struct wiphy *wiphy, u32 pktlen, u8 changed) default: break; } - /* down(&SemHandleUpdateStats); */ #endif return 0; } @@ -3927,27 +3832,7 @@ struct wireless_dev *WILC_WFI_WiphyRegister(struct net_device *net) PRINT_D(CFG80211_DBG, "Successful Registering\n"); } -#if 0 - /*wdev[i]->wiphy->interface_modes = - * BIT(NL80211_IFTYPE_AP); - * wdev[i]->iftype = NL80211_IFTYPE_AP; - */ - - /*Pointing the priv structure the netdev*/ - priv = netdev_priv(net); - - /*linking the wireless_dev structure with the netdevice*/ - priv->dev->ieee80211_ptr = wdev; - priv->dev->ml_priv = priv; - wdev->netdev = priv->dev; -#endif priv->dev = net; -#if 0 - ret = host_int_init(&priv->hWILCWFIDrv); - if (ret) { - PRINT_ER("Error Init Driver\n"); - } -#endif return wdev; @@ -3988,7 +3873,6 @@ int WILC_WFI_InitHostInt(struct net_device *net) sema_init(&(priv->hSemScanReq), 1); s32Error = host_int_init(&priv->hWILCWFIDrv); - /* s32Error = host_int_init(&priv->hWILCWFIDrv_2); */ if (s32Error) { PRINT_ER("Error while initializing hostinterface\n"); } @@ -4018,7 +3902,6 @@ int WILC_WFI_DeInitHostInt(struct net_device *net) op_ifcs--; s32Error = host_int_deinit(priv->hWILCWFIDrv); - /* s32Error = host_int_deinit(priv->hWILCWFIDrv_2); */ /* Clear the Shadow scan */ clear_shadow_scan(priv); -- 2.20.1